Dne 25.7.2014 v 11:10 Boris BREZILLON napsal(a):
On Fri, 25 Jul 2014 10:59:03 +0200
Jiří Prchal <jiri.prchal@xxxxxxxxxxx> wrote:
Dne 25.7.2014 v 10:54 Alexandre Belloni napsal(a):
On 25/07/2014 at 10:37:31 +0200, Jiří Prchal wrote :
Dne 25.7.2014 v 10:30 Alexandre Belloni napsal(a):
Hi,
On 25/07/2014 at 08:14:40 +0200, Jiří Prchal wrote :
I'm using custom board. My spi node:
spi0: spi@f0000000 {
You should override the pinctrl here as you are using gpios for the cs.
pinctrl-0 = <&pinctrl_spi0_custom>;
status = "okay";
cs-gpios = <&pioA 23 0
&pioA 22 0
&pioC 29 0
&pioA 14 0>;
pinctrl@fffff400 {
spi0 {
pinctrl_spi0_custom: spi0-custom {
atmel,pins =
<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
<AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
<AT91_PIOC 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
<AT91_PIOA 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
};
};
Of course, it's the way, but in all other drivers, for example LEDS,
it's not needed. And in other way, if I will not use PA14 at all,
the pin will goes down every spi transfer.
You must not assumed that the pins are muxed to their default state
which is gpio and you should set the pinctrl accordingly for each
device.
If you don't use PA14 at all, then you don't really care about its
state...
Yes and no, what about on board is populated some chip on PA14, but for some reason at this time I don't need it and not
defined in DT?
As long as it's populated you should define it in the DT (the DT should
represent your hardware) and if you don't want to use the populated
device, just set the status property to "disabled" (I'm not sure it
works for spi subdevices though).
OK, that's good idea.
But, I again try my patch in at91sam9x5.dtsi, it works.
/ # dmesg | grep fm25
[ 1.238281] fm25 spi0.0: 128 KByte fm25 fram
/ # dmesg | grep "enable pin"
[ 0.343750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 45 as GPIO
[ 0.343750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 45 as PIOB13 0x2000
[ 0.343750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 47 as GPIO
[ 0.343750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 47 as PIOB15 0x8000
[ 0.347656] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 82 as GPIO
[ 0.347656] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 82 as PIOC18 0x40000
[ 0.347656] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 84 as GPIO
[ 0.347656] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 84 as PIOC20 0x100000
[ 0.351562] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 80 as GPIO
[ 0.351562] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 80 as PIOC16 0x10000
[ 0.351562] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 28 as GPIO
[ 0.351562] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 28 as PIOA28 0x10000000
[ 0.351562] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 21 as GPIO
[ 0.351562] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 21 as PIOA21 0x200000
[ 0.355468] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 3 as GPIO
[ 0.355468] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 3 as PIOA3 0x8
[ 0.355468] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 92 as GPIO
[ 0.355468] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 92 as PIOC28 0x10000000
[ 0.359375] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 90 as GPIO
[ 0.359375] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 90 as PIOC26 0x4000000
[ 0.359375] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 94 as GPIO
[ 0.359375] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 94 as PIOC30 0x40000000
[ 0.359375] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 30 as GPIO
[ 0.363281] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 30 as PIOA30 0x40000000
[ 0.363281] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 31 as GPIO
[ 0.363281] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 31 as PIOA31 0x80000000
[ 0.367187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 29 as GPIO
[ 0.367187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 29 as PIOA29 0x20000000
[ 0.367187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 89 as GPIO
[ 0.367187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 89 as PIOC25 0x2000000
[ 0.968750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 101 as GPIO
[ 0.968750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 101 as PIOD5 0x20
[ 0.968750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 100 as GPIO
[ 0.968750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 100 as PIOD4 0x10
[ 1.234375] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 23 as GPIO
[ 1.234375] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 23 as PIOA23 0x800000
[ 1.242187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 22 as GPIO
[ 1.242187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 22 as PIOA22 0x400000
[ 1.246093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 93 as GPIO
[ 1.246093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 93 as PIOC29 0x20000000
[ 1.250000] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 14 as GPIO
[ 1.250000] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 14 as PIOA14 0x4000
[ 1.656250] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 117 as GPIO
[ 1.656250] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 117 as PIOD21 0x200000
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 50 as GPIO
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 50 as PIOB18 0x40000
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 48 as GPIO
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 48 as PIOB16 0x10000
[ 1.750000] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 46 as GPIO
[ 1.750000] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 46 as PIOB14 0x4000
[ 1.750000] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 44 as GPIO
[ 1.750000] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 44 as PIOB12 0x1000
When I try it in my boerd dts, it works too.
spi0 {
pinctrl_spi0_cs: spi0-cs {
atmel,pins =
<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
<AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
<AT91_PIOC 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
<AT91_PIOA 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
};
spi0: spi@f0000000 {
status = "okay";
pinctrl-0 = <&pinctrl_spi0 &pinctrl_spi0_cs>;
cs-gpios = <&pioA 23 0
&pioA 22 0
&pioC 29 0
&pioA 14 0>;
/ # dmesg | grep fm25
[ 1.234375] fm25 spi0.0: 128 KByte fm25 fram
/ # dmesg | grep "enable pin"
[ 0.332031] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 45 as GPIO
[ 0.332031] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 45 as PIOB13 0x2000
[ 0.332031] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 47 as GPIO
[ 0.332031] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 47 as PIOB15 0x8000
[ 0.332031] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 82 as GPIO
[ 0.332031] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 82 as PIOC18 0x40000
[ 0.335937] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 84 as GPIO
[ 0.335937] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 84 as PIOC20 0x100000
[ 0.335937] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 80 as GPIO
[ 0.335937] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 80 as PIOC16 0x10000
[ 0.339843] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 28 as GPIO
[ 0.339843] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 28 as PIOA28 0x10000000
[ 0.339843] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 21 as GPIO
[ 0.339843] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 21 as PIOA21 0x200000
[ 0.339843] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 3 as GPIO
[ 0.339843] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 3 as PIOA3 0x8
[ 0.343750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 92 as GPIO
[ 0.343750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 92 as PIOC28 0x10000000
[ 0.343750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 90 as GPIO
[ 0.343750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 90 as PIOC26 0x4000000
[ 0.347656] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 94 as GPIO
[ 0.347656] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 94 as PIOC30 0x40000000
[ 0.347656] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 30 as GPIO
[ 0.347656] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 30 as PIOA30 0x40000000
[ 0.351562] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 31 as GPIO
[ 0.351562] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 31 as PIOA31 0x80000000
[ 0.351562] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 29 as GPIO
[ 0.351562] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 29 as PIOA29 0x20000000
[ 0.351562] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 89 as GPIO
[ 0.351562] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 89 as PIOC25 0x2000000
[ 0.964843] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 101 as GPIO
[ 0.964843] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 101 as PIOD5 0x20
[ 0.964843] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 100 as GPIO
[ 0.964843] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 100 as PIOD4 0x10
[ 1.230468] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 23 as GPIO
[ 1.230468] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 23 as PIOA23 0x800000
[ 1.238281] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 22 as GPIO
[ 1.238281] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 22 as PIOA22 0x400000
[ 1.242187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 93 as GPIO
[ 1.242187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 93 as PIOC29 0x20000000
[ 1.246093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 14 as GPIO
[ 1.246093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 14 as PIOA14 0x4000
[ 1.652343] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 117 as GPIO
[ 1.652343] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 117 as PIOD21 0x200000
[ 1.742187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 50 as GPIO
[ 1.742187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 50 as PIOB18 0x40000
[ 1.742187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 48 as GPIO
[ 1.742187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 48 as PIOB16 0x10000
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 46 as GPIO
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 46 as PIOB14 0x4000
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 44 as GPIO
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 44 as PIOB12 0x1000
When not, it doesn't work.
spi0: spi@f0000000 {
status = "okay";
/*pinctrl-0 = <&pinctrl_spi0 &pinctrl_spi0_cs>;*/
cs-gpios = <&pioA 23 0
&pioA 22 0
&pioC 29 0
&pioA 14 0>;
/ # dmesg | grep fm25
/ # dmesg | grep "enable pin"
[ 0.328125] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 45 as GPIO
[ 0.328125] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 45 as PIOB13 0x2000
[ 0.328125] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 47 as GPIO
[ 0.328125] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 47 as PIOB15 0x8000
[ 0.328125] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 82 as GPIO
[ 0.328125] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 82 as PIOC18 0x40000
[ 0.332031] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 84 as GPIO
[ 0.332031] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 84 as PIOC20 0x100000
[ 0.332031] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 80 as GPIO
[ 0.332031] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 80 as PIOC16 0x10000
[ 0.335937] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 28 as GPIO
[ 0.335937] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 28 as PIOA28 0x10000000
[ 0.335937] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 21 as GPIO
[ 0.335937] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 21 as PIOA21 0x200000
[ 0.339843] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 3 as GPIO
[ 0.339843] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 3 as PIOA3 0x8
[ 0.339843] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 92 as GPIO
[ 0.339843] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 92 as PIOC28 0x10000000
[ 0.343750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 90 as GPIO
[ 0.343750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 90 as PIOC26 0x4000000
[ 0.343750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 94 as GPIO
[ 0.343750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 94 as PIOC30 0x40000000
[ 0.347656] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 30 as GPIO
[ 0.347656] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 30 as PIOA30 0x40000000
[ 0.347656] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 31 as GPIO
[ 0.347656] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 31 as PIOA31 0x80000000
[ 0.347656] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 29 as GPIO
[ 0.347656] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 29 as PIOA29 0x20000000
[ 0.351562] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 89 as GPIO
[ 0.351562] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 89 as PIOC25 0x2000000
[ 0.968750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 101 as GPIO
[ 0.968750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 101 as PIOD5 0x20
[ 0.968750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 100 as GPIO
[ 0.968750] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 100 as PIOD4 0x10
[ 1.238281] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 23 as GPIO
[ 1.238281] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 23 as PIOA23 0x800000
[ 1.238281] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 22 as GPIO
[ 1.238281] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 22 as PIOA22 0x400000
[ 1.242187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 93 as GPIO
[ 1.242187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 93 as PIOC29 0x20000000
[ 1.246093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 14 as GPIO
[ 1.246093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 14 as PIOA14 0x4000
[ 1.652343] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 117 as GPIO
[ 1.652343] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 117 as PIOD21 0x200000
[ 1.742187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 50 as GPIO
[ 1.742187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 50 as PIOB18 0x40000
[ 1.742187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 48 as GPIO
[ 1.742187] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 48 as PIOB16 0x10000
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 46 as GPIO
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 46 as PIOB14 0x4000
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 44 as GPIO
[ 1.746093] pinctrl-at91 ahb:apb:pinctrl@fffff400: enable pin 44 as PIOB12 0x1000
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
