Describe the PWM block on IPQ6018.
Signed-off-by: Baruch Siach <baruch@xxxxxxxxxx>
---
v5: Use qcom,pwm-regs for TCSR phandle instead of direct regs
v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring)
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 72ac36c1be57..06b6676097e8 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -355,6 +355,15 @@ i2c_1: i2c@78b7000 { /* BLSP1 QUP2 */
status = "disabled";
};
+ pwm: pwm {
+ #pwm-cells = <2>;
+ compatible = "qcom,ipq6018-pwm";
+ qcom,pwm-regs = <&tcsr_q6 0xa010>;
+ clocks = <&gcc GCC_ADSS_PWM_CLK>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
qpic_bam: dma-controller@7984000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x0 0x07984000 0x0 0x1a000>;
--
2.30.2
