Hi, Yongqiang: Yongqiang Niu <yongqiang.niu@xxxxxxxxxxxx> 於 2021年7月11日 週日 下午2:54寫道： > > the orginal formula will caused rdma fifo threshold config overflow > and no one could come out a solution for all SoC, > set threshold to 70% of max fifo size to make sure it will > not overflow, and 70% is a empirical value Applied to mediatek-drm-next [1], thanks. [1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next Regards, Chun-Kuang. > > Signed-off-by: Yongqiang Niu <yongqiang.niu@xxxxxxxxxxxx> > --- > drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c > index f123fc0..f1f6a2e 100644 > --- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c > +++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c > @@ -164,10 +164,10 @@ void mtk_rdma_config(struct device *dev, unsigned int width, > /* > * Enable FIFO underflow since DSI and DPI can't be blocked. > * Keep the FIFO pseudo size reset default of 8 KiB. Set the > - * output threshold to 6 microseconds with 7/6 overhead to > - * account for blanking, and with a pixel depth of 4 bytes: > + * output threshold to 70% of max fifo size to make sure the > + * threhold will not overflow > */ > - threshold = width * height * vrefresh * 4 * 7 / 1000000; > + threshold = rdma_fifo_size * 7 / 10; > reg = RDMA_FIFO_UNDERFLOW_EN | > RDMA_FIFO_PSEUDO_SIZE(rdma_fifo_size) | > RDMA_OUTPUT_VALID_FIFO_THRESHOLD(threshold); > -- > 1.8.1.1.dirty >
