Rename smp2p-modem to smp2p-mpss, and make the subnode labels of smp2p_adsp
and smp2p_slpi follow the <name>_smp2p_<out/in> layout.
Also move smp2p_slpi_out above smp2p_slpi_in to make it match mpss and adsp
where master-kernel is the first subnode.
This patch brings no functional change.
Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 33 ++++++++++++++-------------
1 file changed, 17 insertions(+), 16 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 258be683ad6d..559612a3ddeb 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -284,12 +284,12 @@ smp2p-adsp {
qcom,local-pid = <0>;
qcom,remote-pid = <2>;
- smp2p_adsp_out: master-kernel {
+ adsp_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
- smp2p_adsp_in: slave-kernel {
+ adsp_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
@@ -297,7 +297,7 @@ smp2p_adsp_in: slave-kernel {
};
};
- smp2p-modem {
+ smp2p-mpss {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
@@ -308,12 +308,12 @@ smp2p-modem {
qcom,local-pid = <0>;
qcom,remote-pid = <1>;
- modem_smp2p_out: master-kernel {
+ mpss_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
- modem_smp2p_in: slave-kernel {
+ mpss_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
@@ -332,16 +332,17 @@ smp2p-slpi {
qcom,local-pid = <0>;
qcom,remote-pid = <3>;
- smp2p_slpi_in: slave-kernel {
+ slpi_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ slpi_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
+
interrupt-controller;
#interrupt-cells = <2>;
};
-
- smp2p_slpi_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
- };
};
soc: soc {
@@ -2058,10 +2059,10 @@ adsp_pil: remoteproc@9300000 {
reg = <0x09300000 0x80000>;
interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
@@ -2070,7 +2071,7 @@ adsp_pil: remoteproc@9300000 {
memory-region = <&adsp_mem>;
- qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-states = <&adsp_smp2p_out 0>;
qcom,smem-state-names = "stop";
power-domains = <&rpmpd MSM8996_VDDCX>;
--
2.32.0
