Hi, On Sat, Jun 26, 2021 at 9:52 AM Rajeev Nandan <rajeevny@xxxxxxxxxxxxxx> wrote: > > This series adds the support for the eDP panel that needs the backlight > controlling over the DP AUX channel using DPCD registers of the panel > as per the VESA's standard. > > This series also adds support for the Samsung eDP AMOLED panel that > needs DP AUX to control the backlight, and introduces new delays in the > @panel_desc.delay to support this panel. > > This patch series depends on the following two series: > - Doug's series [1], exposed the DP AUX channel to the panel-simple. > - Lyude's series [2], introduced new drm helper functions for DPCD > backlight. > > This series is the logical successor to the series [3]. > > Changes in v1: > - Created dpcd backlight helper with very basic functionality, added > backlight registration in the ti-sn65dsi86 bridge driver. > > Changes in v2: > - Created a new DisplayPort aux backlight driver and moved the code from > drm_dp_aux_backlight.c (v1) to the new driver. > > Changes in v3: > - Fixed module compilation (kernel test bot). > > Changes in v4: > - Added basic DPCD backlight support in panel-simple. > - Added support for a new Samsung panel ATNA33XC20 that needs DPCD > backlight controlling and has a requirement of delays between enable > GPIO and regulator. > > Changes in v5: > Addressed review suggestions from Douglas: > - Created a new API drm_panel_dp_aux_backlight() in drm_panel.c > - Moved DP AUX backlight functions from panel-simple.c to drm_panel.c > - panel-simple probe() calls drm_panel_dp_aux_backlight() to create > backlight when the backlight phandle is not specified in panel DT > and DP AUX channel is present. > - Added check for drm_edp_backlight_supported() before registering. > - Removed the @uses_dpcd_backlight flag from panel_desc as this > should be auto-detected. > - Updated comments/descriptions. > > Changes in v6: > - Rebased > - Updated wanrning messages, fixed word wrapping in comments. > - Fixed ordering of memory allocation > > Changes in v7: > - Updated the disable_to_power_off and power_to_enable panel delays > as discovered at <https://crrev.com/c/2966167> (Douglas) > > Changes in v8: > - Now using backlight_is_blank() to get the backlight blank status (Sam Ravnborg) > - Added a new patch #4 to fix the warnings for eDP panel description (Sam Ravnborg) > > [1] https://lore.kernel.org/dri-devel/20210525000159.3384921-1-dianders@xxxxxxxxxxxx/ > [2] https://lore.kernel.org/dri-devel/20210514181504.565252-1-lyude@xxxxxxxxxx/ > [3] https://lore.kernel.org/dri-devel/1619416756-3533-1-git-send-email-rajeevny@xxxxxxxxxxxxxx/ > > Rajeev Nandan (6): > drm/panel: add basic DP AUX backlight support > drm/panel-simple: Support DP AUX backlight > drm/panel-simple: Support for delays between GPIO & regulator > drm/panel-simple: Update validation warnings for eDP panel description > dt-bindings: display: simple: Add Samsung ATNA33XC20 > drm/panel-simple: Add Samsung ATNA33XC20 > > .../bindings/display/panel/panel-simple.yaml | 2 + > drivers/gpu/drm/drm_panel.c | 108 +++++++++++++++++++++ > drivers/gpu/drm/panel/panel-simple.c | 73 +++++++++++++- > include/drm/drm_panel.h | 15 ++- > 4 files changed, 190 insertions(+), 8 deletions(-) Pushed to drm-misc-next. 4bfe6c8f7c23 drm/panel-simple: Add Samsung ATNA33XC20 c20dec193584 dt-bindings: display: simple: Add Samsung ATNA33XC20 13aceea56fd5 drm/panel-simple: Update validation warnings for eDP panel description 18a1488bf1e1 drm/panel-simple: Support for delays between GPIO & regulator bfd451403d70 drm/panel-simple: Support DP AUX backlight 10f7b40e4f30 drm/panel: add basic DP AUX backlight support -Doug
