Hi,
On Thu, Jun 17, 2021 at 7:00 AM Chun-Jie Chen
<chun-jie.chen@xxxxxxxxxxxx> wrote:
>
> Add MT8195 nnasys clock provider
>
> Signed-off-by: Chun-Jie Chen <chun-jie.chen@xxxxxxxxxxxx>
> ---
> drivers/clk/mediatek/Kconfig | 6 ++
> drivers/clk/mediatek/Makefile | 1 +
> drivers/clk/mediatek/clk-mt8195-nna.c | 128 ++++++++++++++++++++++++++
> 3 files changed, 135 insertions(+)
> create mode 100644 drivers/clk/mediatek/clk-mt8195-nna.c
>
> diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
> index 7cb745d47770..d34517728f4a 100644
> --- a/drivers/clk/mediatek/Kconfig
> +++ b/drivers/clk/mediatek/Kconfig
> @@ -636,6 +636,12 @@ config COMMON_CLK_MT8195_SCP_ADSP
> help
> This driver supports MediaTek MT8195 scp_adsp clocks.
>
> +config COMMON_CLK_MT8195_NNASYS
> + bool "Clock driver for MediaTek MT8195 nnasys"
> + depends on COMMON_CLK_MT8195
> + help
> + This driver supports MediaTek MT8195 nnasys clocks.
> +
> config COMMON_CLK_MT8516
> bool "Clock driver for MediaTek MT8516"
> depends on ARCH_MEDIATEK || COMPILE_TEST
Same comments about commit log and Kconfig option apply.
> diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
> index 058ff55468a2..49e585a7ac8e 100644
> --- a/drivers/clk/mediatek/Makefile
> +++ b/drivers/clk/mediatek/Makefile
> @@ -89,5 +89,6 @@ obj-$(CONFIG_COMMON_CLK_MT8195_IMGSYS) += clk-mt8195-img.o
> obj-$(CONFIG_COMMON_CLK_MT8195_IPESYS) += clk-mt8195-ipe.o
> obj-$(CONFIG_COMMON_CLK_MT8195_MFGCFG) += clk-mt8195-mfg.o
> obj-$(CONFIG_COMMON_CLK_MT8195_SCP_ADSP) += clk-mt8195-scp_adsp.o
> +obj-$(CONFIG_COMMON_CLK_MT8195_NNASYS) += clk-mt8195-nna.o
> obj-$(CONFIG_COMMON_CLK_MT8516) += clk-mt8516.o
> obj-$(CONFIG_COMMON_CLK_MT8516_AUDSYS) += clk-mt8516-aud.o
> diff --git a/drivers/clk/mediatek/clk-mt8195-nna.c b/drivers/clk/mediatek/clk-mt8195-nna.c
> new file mode 100644
> index 000000000000..4210c6cf5ef4
> --- /dev/null
> +++ b/drivers/clk/mediatek/clk-mt8195-nna.c
> @@ -0,0 +1,128 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +//
> +// Copyright (c) 2021 MediaTek Inc.
> +// Author: Chun-Jie Chen <chun-jie.chen@xxxxxxxxxxxx>
> +
> +#include <linux/clk-provider.h>
> +#include <linux/platform_device.h>
> +
> +#include "clk-mtk.h"
> +#include "clk-gate.h"
> +
> +#include <dt-bindings/clock/mt8195-clk.h>
> +
> +static const struct mtk_gate_regs nna0_cg_regs = {
> + .set_ofs = 0x104,
> + .clr_ofs = 0x104,
> + .sta_ofs = 0x104,
You are using the _no_setclr_ops variant. That means the .set_ofs and
.clr_ofs fields don't have any meaning and are not used. Please just
don't initialize them.
I think this applies to some of the other patches as well.
> +};
> +
> +static const struct mtk_gate_regs nna1_cg_regs = {
> + .set_ofs = 0x110,
> + .clr_ofs = 0x110,
> + .sta_ofs = 0x110,
> +};
> +
> +static const struct mtk_gate_regs nna2_cg_regs = {
> + .set_ofs = 0x90,
> + .clr_ofs = 0x90,
> + .sta_ofs = 0x90,
> +};
> +
> +static const struct mtk_gate_regs nna3_cg_regs = {
> + .set_ofs = 0x94,
> + .clr_ofs = 0x94,
> + .sta_ofs = 0x94,
> +};
> +
> +static const struct mtk_gate_regs nna4_cg_regs = {
> + .set_ofs = 0x98,
> + .clr_ofs = 0x98,
> + .sta_ofs = 0x98,
> +};
> +
> +static const struct mtk_gate_regs nna5_cg_regs = {
> + .set_ofs = 0x9c,
> + .clr_ofs = 0x9c,
> + .sta_ofs = 0x9c,
> +};
> +
> +static const struct mtk_gate_regs nna6_cg_regs = {
> + .set_ofs = 0xa0,
> + .clr_ofs = 0xa0,
> + .sta_ofs = 0xa0,
> +};
> +
> +static const struct mtk_gate_regs nna7_cg_regs = {
> + .set_ofs = 0xa4,
> + .clr_ofs = 0xa4,
> + .sta_ofs = 0xa4,
> +};
Unfortunately this hardware block is not documented in the datasheets,
so I can't verify these register offsets.
> +
> +#define GATE_NNA0(_id, _name, _parent, _shift) \
> + GATE_MTK(_id, _name, _parent, &nna0_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
> +
> +#define GATE_NNA1(_id, _name, _parent, _shift) \
> + GATE_MTK(_id, _name, _parent, &nna1_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
> +
> +#define GATE_NNA2(_id, _name, _parent, _shift) \
> + GATE_MTK(_id, _name, _parent, &nna2_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
> +
> +#define GATE_NNA3(_id, _name, _parent, _shift) \
> + GATE_MTK(_id, _name, _parent, &nna3_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
> +
> +#define GATE_NNA4(_id, _name, _parent, _shift) \
> + GATE_MTK(_id, _name, _parent, &nna4_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
> +
> +#define GATE_NNA5(_id, _name, _parent, _shift) \
> + GATE_MTK(_id, _name, _parent, &nna5_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
> +
> +#define GATE_NNA6(_id, _name, _parent, _shift) \
> + GATE_MTK(_id, _name, _parent, &nna6_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
> +
> +#define GATE_NNA7(_id, _name, _parent, _shift) \
> + GATE_MTK(_id, _name, _parent, &nna7_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
Defining a bunch of macros, only to have each of them used once doesn't
provide any gains with regards to reusing code. Please consider just using
GATE_MTK directly below.
In the general case I would probably make some derivatives of GATE_MTK,
such that the ops field (which seems to be the longest) is hidden, but
all the other fields are exposed.
> +static const struct mtk_gate nna_clks[] = {
> + /* NNA0 */
> + GATE_NNA0(CLK_NNA_F26M, "nna_f26m", "clk26m", 0),
> + /* NNA1 */
> + GATE_NNA1(CLK_NNA_AXI, "nna_axi", "axi_sel", 0),
> + /* NNA2 */
> + GATE_NNA2(CLK_NNA_NNA0, "nna_nna0", "nna0_sel", 0),
> + /* NNA3 */
> + GATE_NNA3(CLK_NNA_NNA1, "nna_nna1", "nna0_sel", 0),
Is this correct? I would expect the clock for nna1 to be fed from
"nna1_sel".
ChenYu
> + /* NNA4 */
> + GATE_NNA4(CLK_NNA_NNA0_EMI, "nna_nna0_emi", "mem_466m", 0),
> + GATE_NNA4(CLK_NNA_CKGEN_MEM, "nna_ckgen_mem", "mem_466m", 4),
> + /* NNA5 */
> + GATE_NNA5(CLK_NNA_NNA1_EMI, "nna_nna1_emi", "mem_466m", 0),
> + /* NNA6 */
> + GATE_NNA6(CLK_NNA_NNA0_AXI, "nna_nna0_axi", "axi_sel", 0),
> + /* NNA7 */
> + GATE_NNA7(CLK_NNA_NNA1_AXI, "nna_nna1_axi", "axi_sel", 0),
> +};
> +
> +static const struct mtk_clk_desc nna_desc = {
> + .clks = nna_clks,
> + .num_clks = ARRAY_SIZE(nna_clks),
> +};
> +
> +static const struct of_device_id of_match_clk_mt8195_nna[] = {
> + {
> + .compatible = "mediatek,mt8195-nnasys",
> + .data = &nna_desc,
> + }, {
> + /* sentinel */
> + }
> +};
> +
> +static struct platform_driver clk_mt8195_nna_drv = {
> + .probe = mtk_clk_simple_probe,
> + .driver = {
> + .name = "clk-mt8195-nna",
> + .of_match_table = of_match_clk_mt8195_nna,
> + },
> +};
> +
> +builtin_platform_driver(clk_mt8195_nna_drv);
> --
> 2.18.0
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
