[PATCH v2 5/7] arm64: dts: qcom: sm8250: remove mmcx regulator

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Switch dispcc and videocc into using MMCX domain directly. Drop the now
unused mmcx regulator.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 4c0de12aaba6..2a468b85dc09 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -271,13 +271,6 @@ memory@80000000 {
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
-	mmcx_reg: mmcx-reg {
-		compatible = "regulator-fixed-domain";
-		power-domains = <&rpmhpd SM8250_MMCX>;
-		required-opps = <&rpmhpd_opp_low_svs>;
-		regulator-name = "MMCX";
-	};
-
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
@@ -2362,7 +2355,7 @@ videocc: clock-controller@abf0000 {
 			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK_A>;
-			mmcx-supply = <&mmcx_reg>;
+			power-domains = <&rpmhpd SM8250_MMCX>;
 			clock-names = "iface", "bi_tcxo", "bi_tcxo_ao";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -2627,7 +2620,7 @@ opp-358000000 {
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,sm8250-dispcc";
 			reg = <0 0x0af00000 0 0x10000>;
-			mmcx-supply = <&mmcx_reg>;
+			power-domains = <&rpmhpd SM8250_MMCX>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&dsi0_phy 0>,
 				 <&dsi0_phy 1>,
-- 
2.30.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux