RE: [PATCH v4 1/2] iio: frequency: adrf6780: add support for ADRF6780

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Jonathan Cameron <jic23@xxxxxxxxxx>
> Sent: Saturday, July 3, 2021 6:57 PM
> To: Miclaus, Antoniu <Antoniu.Miclaus@xxxxxxxxxx>
> Cc: linux-iio@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; robh+dt@xxxxxxxxxx
> Subject: Re: [PATCH v4 1/2] iio: frequency: adrf6780: add support for
> ADRF6780
> 
> On Fri, 2 Jul 2021 14:12:38 +0300
> Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx> wrote:
> 
> > The ADRF6780 is a silicon germanium (SiGe) design, wideband,
> > microwave upconverter optimized for point to point microwave
> > radio designs operating in the 5.9 GHz to 23.6 GHz frequency
> > range.
> >
> > Datasheet:
> > https://www.analog.com/media/en/technical-documentation/data-
> sheets/ADRF6780.pdf
> >
> > Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
> 
> Hi Antoniu,
> 
> Frequency drivers are fairly unusual so if you could add a listing of
> the attributes in sysfs that would be great (it's nice practice anyway but
> I don't insist on it!)
> 
> Various fairly minor comments inline.
> 
> Thanks,
> 
> Jonathan
> 
> 
> > ---
> >  changes in v4:
> >   - change license to: GPL-2.0-only
> >  drivers/iio/frequency/Kconfig    |  13 +
> >  drivers/iio/frequency/Makefile   |   1 +
> >  drivers/iio/frequency/adrf6780.c | 498
> +++++++++++++++++++++++++++++++
> >  3 files changed, 512 insertions(+)
> >  create mode 100644 drivers/iio/frequency/adrf6780.c
> >
> > diff --git a/drivers/iio/frequency/Kconfig
> b/drivers/iio/frequency/Kconfig
> > index 240b81502512..fc9751c48f59 100644
> > --- a/drivers/iio/frequency/Kconfig
> > +++ b/drivers/iio/frequency/Kconfig
> > @@ -49,5 +49,18 @@ config ADF4371
> >
> >  	  To compile this driver as a module, choose M here: the
> >  	  module will be called adf4371.
> > +
> > +config ADRF6780
> > +        tristate "Analog Devices ADRF6780 Microwave Upconverter"
> > +        depends on SPI
> > +        depends on COMMON_CLK
> > +        depends on OF
> 
> Why?  Pretty much everything seems to have defaults if not provided
> via OF.
> I've asked for the generic firmware functions anyway, so you can drop
> this
> for that reason if nothing else!
> 
> > +        help
> > +          Say yes here to build support for Analog Devices ADRF6780
> > +          5.9 GHz to 23.6 GHz, Wideband, Microwave Upconverter.
> > +
> > +          To compile this driver as a module, choose M here: the
> > +          module will be called adrf6780.
> > +
> >  endmenu
> >  endmenu
> > diff --git a/drivers/iio/frequency/Makefile
> b/drivers/iio/frequency/Makefile
> > index 518b1e50caef..ae3136c79202 100644
> > --- a/drivers/iio/frequency/Makefile
> > +++ b/drivers/iio/frequency/Makefile
> > @@ -7,3 +7,4 @@
> >  obj-$(CONFIG_AD9523) += ad9523.o
> >  obj-$(CONFIG_ADF4350) += adf4350.o
> >  obj-$(CONFIG_ADF4371) += adf4371.o
> > +obj-$(CONFIG_ADRF6780) += adrf6780.o
> > diff --git a/drivers/iio/frequency/adrf6780.c
> b/drivers/iio/frequency/adrf6780.c
> > new file mode 100644
> > index 000000000000..472a66f90c7f
> > --- /dev/null
> > +++ b/drivers/iio/frequency/adrf6780.c
> > @@ -0,0 +1,498 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * ADRF6780 driver
> > + *
> > + * Copyright 2021 Analog Devices Inc.
> > + */
> > +
> > +#include <linux/bitfield.h>
> > +#include <linux/bits.h>
> > +#include <linux/clk.h>
> > +#include <linux/clkdev.h>
> > +#include <linux/clk-provider.h>
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/iio/iio.h>
> > +#include <linux/module.h>
> 
> #include <linux/mod_devicetable.h>
> 
> > +#include <linux/spi/spi.h>
> > +
> > +/* ADRF6780 Register Map */
> > +#define ADRF6780_REG_CONTROL			0x00
> > +#define ADRF6780_REG_ALARM_READBACK		0x01
> > +#define ADRF6780_REG_ALARM_MASKS		0x02
> > +#define ADRF6780_REG_ENABLE			0x03
> > +#define ADRF6780_REG_LINEARIZE			0x04
> > +#define ADRF6780_REG_LO_PATH			0x05
> > +#define ADRF6780_REG_ADC_CONTROL		0x06
> > +#define ADRF6780_REG_ADC_OUTPUT			0x0C
> > +
> > +/* ADRF6780_REG_CONTROL Map */
> > +#define ADRF6780_PARITY_EN_MSK			BIT(15)
> > +#define ADRF6780_PARITY_EN(x)
> 	FIELD_PREP(ADRF6780_PARITY_EN_MSK, x)
> > +#define ADRF6780_SOFT_RESET_MSK			BIT(14)
> > +#define ADRF6780_SOFT_RESET(x)
> 	FIELD_PREP(ADRF6780_SOFT_RESET_MSK, x)
> > +#define ADRF6780_CHIP_ID_MSK			GENMASK(11, 4)
> > +#define ADRF6780_CHIP_ID			0xA
> > +#define ADRF6780_CHIP_REVISION_MSK		GENMASK(3, 0)
> > +#define ADRF6780_CHIP_REVISION(x)
> 	FIELD_PREP(ADRF6780_CHIP_REVISION_MSK, x)
> > +
> > +/* ADRF6780_REG_ALARM_READBACK Map */
> > +#define ADRF6780_PARITY_ERROR_MSK		BIT(15)
> > +#define ADRF6780_PARITY_ERROR(x)
> 	FIELD_PREP(ADRF6780_PARITY_ERROR_MSK, x)
> > +#define ADRF6780_TOO_FEW_ERRORS_MSK		BIT(14)
> > +#define ADRF6780_TOO_FEW_ERRORS(x)
> 	FIELD_PREP(ADRF6780_TOO_FEW_ERRORS_MSK, x)
> > +#define ADRF6780_TOO_MANY_ERRORS_MSK		BIT(13)
> > +#define ADRF6780_TOO_MANY_ERRORS(x)
> 	FIELD_PREP(ADRF6780_TOO_MANY_ERRORS_MSK, x)
> > +#define ADRF6780_ADDRESS_RANGE_ERROR_MSK	BIT(12)
> > +#define ADRF6780_ADDRESS_RANGE_ERROR(x)
> 	FIELD_PREP(ADRF6780_ADDRESS_RANGE_ERROR_MSK, x)
> > +
> > +/* ADRF6780_REG_ENABLE Map */
> > +#define ADRF6780_VGA_BUFFER_EN_MSK		BIT(8)
> > +#define ADRF6780_VGA_BUFFER_EN(x)
> 	FIELD_PREP(ADRF6780_VGA_BUFFER_EN_MSK, x)
> > +#define ADRF6780_DETECTOR_EN_MSK		BIT(7)
> > +#define ADRF6780_DETECTOR_EN(x)
> 	FIELD_PREP(ADRF6780_DETECTOR_EN_MSK, x)
> > +#define ADRF6780_LO_BUFFER_EN_MSK		BIT(6)
> > +#define ADRF6780_LO_BUFFER_EN(x)
> 	FIELD_PREP(ADRF6780_LO_BUFFER_EN_MSK, x)
> > +#define ADRF6780_IF_MODE_EN_MSK			BIT(5)
> > +#define ADRF6780_IF_MODE_EN(x)
> 	FIELD_PREP(ADRF6780_IF_MODE_EN_MSK, x)
> > +#define ADRF6780_IQ_MODE_EN_MSK			BIT(4)
> > +#define ADRF6780_IQ_MODE_EN(x)
> 	FIELD_PREP(ADRF6780_IQ_MODE_EN_MSK, x)
> > +#define ADRF6780_LO_X2_EN_MSK			BIT(3)
> > +#define ADRF6780_LO_X2_EN(x)
> 	FIELD_PREP(ADRF6780_LO_X2_EN_MSK, x)
> > +#define ADRF6780_LO_PPF_EN_MSK			BIT(2)
> > +#define ADRF6780_LO_PPF_EN(x)
> 	FIELD_PREP(ADRF6780_LO_PPF_EN_MSK, x)
> > +#define ADRF6780_LO_EN_MSK			BIT(1)
> > +#define ADRF6780_LO_EN(x)
> 	FIELD_PREP(ADRF6780_LO_EN_MSK, x)
> > +#define ADRF6780_UC_BIAS_EN_MSK			BIT(0)
> > +#define ADRF6780_UC_BIAS_EN(x)
> 	FIELD_PREP(ADRF6780_UC_BIAS_EN_MSK, x)
> > +
> > +/* ADRF6780_REG_LINEARIZE Map */
> > +#define ADRF6780_RDAC_LINEARIZE_MSK		GENMASK(7, 0)
> > +#define ADRF6780_RDAC_LINEARIZE(x)
> 	FIELD_PREP(ADRF6780_RDAC_LINEARIZE_MSK, x)
> > +
> > +/* ADRF6780_REG_LO_PATH Map */
> > +#define ADRF6780_LO_SIDEBAND_MSK		BIT(10)
> > +#define ADRF6780_LO_SIDEBAND(x)
> 	FIELD_PREP(ADRF6780_LO_SIDEBAND_MSK, x)
> > +#define ADRF6780_Q_PATH_PHASE_ACCURACY_MSK
> 	GENMASK(7, 4)
> > +#define ADRF6780_Q_PATH_PHASE_ACCURACY(x)
> 	FIELD_PREP(ADRF6780_Q_PATH_PHASE_ACCURACY_MSK, x)
> > +#define ADRF6780_I_PATH_PHASE_ACCURACY_MSK
> 	GENMASK(3, 0)
> > +#define ADRF6780_I_PATH_PHASE_ACCURACY(x)
> 	FIELD_PREP(ADRF6780_I_PATH_PHASE_ACCURACY_MSK, x)
> > +
> > +/* ADRF6780_REG_ADC_CONTROL Map */
> > +#define ADRF6780_VDET_OUTPUT_SELECT_MSK		BIT(3)
> > +#define ADRF6780_VDET_OUTPUT_SELECT(x)
> 	FIELD_PREP(ADRF6780_VDET_OUTPUT_SELECT_MSK, x)
> > +#define ADRF6780_ADC_START_MSK			BIT(2)
> > +#define ADRF6780_ADC_START(x)
> 	FIELD_PREP(ADRF6780_ADC_START_MSK, x)
> > +#define ADRF6780_ADC_EN_MSK			BIT(1)
> > +#define ADRF6780_ADC_EN(x)
> 	FIELD_PREP(ADRF6780_ADC_EN_MSK, x)
> > +#define ADRF6780_ADC_CLOCK_EN_MSK		BIT(0)
> > +#define ADRF6780_ADC_CLOCK_EN(x)
> 	FIELD_PREP(ADRF6780_ADC_CLOCK_EN_MSK, x)
> > +
> > +/* ADRF6780_REG_ADC_OUTPUT Map */
> > +#define ADRF6780_ADC_STATUS_MSK			BIT(8)
> > +#define ADRF6780_ADC_STATUS(x)
> 	FIELD_PREP(ADRF6780_ADC_STATUS_MSK, x)
> > +#define ADRF6780_ADC_VALUE_MSK
> 	GENMASK(7, 0)
> > +#define ADRF6780_ADC_VALUE(x)
> 	FIELD_PREP(ADRF6780_ADC_VALUE_MSK, x)
> 
> Not used.  In general, just use FIELD_PREP / FIELD_GET inline rather
> than having extra
> macros like these. That approach is simpler for reviewers to follow.
> 
> > +
> > +struct adrf6780_dev {
> > +	struct spi_device	*spi;
> > +	struct clk		*clkin;
> > +	/* Protect against concurrent accesses to the device */
> > +	struct mutex		lock;
> > +	bool			vga_buff_en;
> > +	bool			lo_buff_en;
> > +	bool			if_mode_en;
> > +	bool			iq_mode_en;
> > +	bool			lo_x2_en;
> > +	bool			lo_ppf_en;
> > +	bool			lo_en;
> > +	bool			uc_bias_en;
> > +	bool			lo_sideband;
> > +	bool			vdet_out_en;
> > +};
> > +
> > +static int adrf6780_spi_read(struct adrf6780_dev *dev, unsigned int
> reg,
> > +			      unsigned int *val)
> > +{
> > +	int ret;
> > +	unsigned int temp;
> > +	struct spi_transfer t = {0};
> > +	u8 data[3];
> > +
> > +	data[0] = 0x80 | (reg << 1);
> > +	data[1] = 0x0;
> > +	data[2] = 0x0;
> > +
> > +	t.rx_buf = &data[0];
> > +	t.tx_buf = &data[0];
> > +	t.len = 3;
> > +
> > +	ret = spi_sync_transfer(dev->spi, &t, 1);
> 
> data needs to be dma safe.
> 
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	temp = ((data[0] | 0x80 | (reg << 1)) << 16) |
> > +		(data[1] << 8) | data[2];
> 
> Ouch. That's a bit nasty, but why are you writing the reg into
> it?  Looks like a get_unaligned_be24() >> 1 and a 16bit mask.
> (use GENMASK(15, 0) for that to make it apparent what is happening.
> 
> > +
> > +	*val = (temp >> 1) & 0xFFFF;
> > +
> > +	return ret;
> > +}
> > +
> > +static int adrf6780_spi_write(struct adrf6780_dev *dev,
> > +				      unsigned int reg,
> > +				      unsigned int val)
> > +{
> > +	u8 data[3];
> > +
> > +	val = (val << 1);
> > +
> > +	data[0] = (reg << 1) | (val >> 16);
> > +	data[1] = val >> 8;
> > +	data[2] = val;
> 
> An opportunity for
> put_unaligned_be24() with a value of (I think)
> 
> (val << 1) | (reg << 17)
> 
> 
> > +
> > +	return spi_write(dev->spi, &data[0], 3);
> 
> Needs a dma safe buffer, which basically means it can't be on the
> stack.
> Lots of ways of handling that, but look for __cacheline_aligned in IIO
> drivers
> to see the one we probably use mostly commonly in IIO drivers.

Hi Jonathan,

This is something I wanted to ask for some time so I will take the opportunity here :).
Is this something you prefer just not to risk at all and make it an hard requirement
(which is fair)? ...

I'm asking this because, tbh, I would be very surprised if any spi/i2c controller out there
is using dma for a 3byte transfer. I guess the overhead of setting it up is probably not
worth it...

For instance, in i2c [1], the "educated guess" is around 8byte (to start using dma safe buffers).

[1]: https://elixir.bootlin.com/linux/latest/source/Documentation/i2c/dma-considerations.rst#L15

- Nuno Sá





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux