Add the pclk-sample property to the list of optional endpoint
properties for the mt9p031 camera sensor.
Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
---
Documentation/devicetree/bindings/media/i2c/mt9p031.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
index 4437d0e3147d..17e44fc6dc66 100644
--- a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
+++ b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
@@ -22,6 +22,10 @@ Required Properties:
Optional Properties:
- reset-gpios: Chip reset GPIO
+Optional endpoint properties:
+- pclk-sample: For information see ../video-interfaces.txt. The value is set to
+ 0 if it isn't specified.
+
For further reading on port node refer to
Documentation/devicetree/bindings/media/video-interfaces.txt.
@@ -45,6 +49,7 @@ Example:
mt9p031_1: endpoint {
input-clock-frequency = <6000000>;
pixel-clock-frequency = <96000000>;
+ pclk-sample = <1>;
};
};
};
--
2.25.1
