Re: [PATCH v6 2/2] MIPS: Loongson64: DTS: Add pm block node for Loongson-2K1000

[zhangqing <zhangqing@xxxxxxxxxxx>]

On 06/30/2021 04:20 PM, Jiaxun Yang wrote:
> 在 2021/6/30 14:51, Qing Zhang 写道:
> > The module is now supported, enable it.
>
> Oh, you forgot binding document.

    oh, I forgot a patch... :
    I'll send it make RESEND.

    Thanks,

    -Qing

> Thanks.
>
> - Jiaxun
>
> > Signed-off-by: Qing Zhang <zhangqing@xxxxxxxxxxx>
> > ---
> >   arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi | 5 +++++
> >   1 file changed, 5 insertions(+)
> >
> > diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi 
> > b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
> > index 569e814def83..8f469b623740 100644
> > --- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
> > +++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
> > @@ -52,6 +52,11 @@ package0: bus@10000000 {
> >               0 0x40000000 0 0x40000000 0 0x40000000
> >               0xfe 0x00000000 0xfe 0x00000000 0 0x40000000>;
> >   +        pm: power-controller@1fe07000 {
> > +            compatible = "loongson,ls2k-pm";
> > +            reg = <0 0x1fe07000 0 0x422>;
> > +        };
> > +
> >           liointc0: interrupt-controller@1fe11400 {
> >               compatible = "loongson,liointc-2.0";
> >               reg = <0 0x1fe11400 0 0x40>,