Re: [Patch v2 3/5] cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 6/28/21 10:35 PM, Viresh Kumar wrote:
On 24-06-21, 07:58, Thara Gopinath wrote:
Add interrupt support to notify the kernel of h/w initiated frequency
throttling by LMh. Convey this to scheduler via thermal presssure
interface.

Signed-off-by: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
---

v1->v2:
	- Introduced qcom_cpufreq_hw_lmh_init to consolidate LMh related initializations
	  as per Viresh's review comment.
	- Moved the piece of code restarting polling/re-enabling LMh interrupt to
	  qcom_lmh_dcvs_notify therby simplifying isr and timer callback as per Viresh's
	  suggestion.
	- Droped cpus from qcom_cpufreq_data and instead using cpus from cpufreq_policy in
	  qcom_lmh_dcvs_notify as per Viresh's review comment.
	- Dropped dt property qcom,support-lmh as per Bjorn's suggestion.
	- Other minor/cosmetic fixes

  drivers/cpufreq/qcom-cpufreq-hw.c | 103 ++++++++++++++++++++++++++++++
  1 file changed, 103 insertions(+)

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index f86859bf76f1..241f6f2b441f 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -13,6 +13,7 @@
  #include <linux/of_platform.h>
  #include <linux/pm_opp.h>
  #include <linux/slab.h>
+#include <linux/interrupt.h>

Please don't break the alphabetical order here.

  #define LUT_MAX_ENTRIES			40U
  #define LUT_SRC				GENMASK(31, 30)
@@ -22,10 +23,13 @@
  #define CLK_HW_DIV			2
  #define LUT_TURBO_IND			1
+#define HZ_PER_KHZ 1000

  struct qcom_cpufreq_soc_data {
  	u32 reg_enable;
  	u32 reg_freq_lut;
  	u32 reg_volt_lut;
+	u32 reg_current_vote;
  	u32 reg_perf_state;
  	u8 lut_row_size;
  };
@@ -33,7 +37,10 @@ struct qcom_cpufreq_soc_data {
  struct qcom_cpufreq_data {
  	void __iomem *base;
  	struct resource *res;
+	struct delayed_work lmh_dcvs_poll_work;
  	const struct qcom_cpufreq_soc_data *soc_data;
+	struct cpufreq_policy *policy;
+	int lmh_dcvs_irq;
  };
static unsigned long cpu_hw_rate, xo_rate;
@@ -251,10 +258,79 @@ static void qcom_get_related_cpus(int index, struct cpumask *m)
  	}
  }
+static inline unsigned long qcom_lmh_vote_to_freq(u32 val)
+{
+	return (val & 0x3FF) * 19200;
+}
+
+static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data)
+{
+	struct cpufreq_policy *policy = data->policy;
+	struct dev_pm_opp *opp;
+	struct device *dev;
+	unsigned long max_capacity, capacity, freq_hz, throttled_freq;
+	unsigned int val, freq;
+
+	/*
+	 * Get the h/w throttled frequency, normalize it using the
+	 * registered opp table and use it to calculate thermal pressure.
+	 */
+	val = readl_relaxed(data->base + data->soc_data->reg_current_vote);
+	freq = qcom_lmh_vote_to_freq(val);
+	freq_hz = freq * HZ_PER_KHZ;
+
+	dev = get_cpu_device(cpumask_first(policy->cpus));
+	opp = dev_pm_opp_find_freq_floor(dev, &freq_hz);
+	if (IS_ERR(opp) && PTR_ERR(opp) == -ERANGE)
+		opp = dev_pm_opp_find_freq_ceil(dev, &freq_hz);
+
+	throttled_freq = freq_hz / HZ_PER_KHZ;
+
+	/* Update thermal pressure */
+	max_capacity = arch_scale_cpu_capacity(cpumask_first(policy->cpus));
+	capacity = throttled_freq * max_capacity;
+	capacity /= policy->cpuinfo.max_freq;
+	/* Don't pass boost capacity to scheduler */
+	if (capacity > max_capacity)
+		capacity = max_capacity;

I wonder why this check isn't present for cpufreq_cooling.c .

Hi Viresh,

I don't think cpufreq_cooling recognizes boost frequencies. The max state there is the max of nominal frequencies , right? If not, it might be a good idea to add this check there as well.

I will fix rest of your comments in v3.

--
Warm Regards
Thara (She/Her/Hers)


+	arch_set_thermal_pressure(policy->cpus, max_capacity - capacity);
+	/*

Whenever you mix code and comments, please separate them with a blank
line, else it becomes a bit messy and harder to read.

+	 * If h/w throttled frequency is higher than what cpufreq has requested for, stop
+	 * polling and switch back to interrupt mechanism
+	 */
+	if (throttled_freq >= qcom_cpufreq_hw_get(cpumask_first(policy->cpus)))
+		/* Clear the existing interrupts and enable it back */
+		enable_irq(data->lmh_dcvs_irq);
+	else
+		mod_delayed_work(system_highpri_wq, &data->lmh_dcvs_poll_work,
+				 msecs_to_jiffies(10));
+}
+
+static void qcom_lmh_dcvs_poll(struct work_struct *work)
+{
+	struct qcom_cpufreq_data *data;
+
+	data = container_of(work, struct qcom_cpufreq_data, lmh_dcvs_poll_work.work);
+
+	qcom_lmh_dcvs_notify(data);
+}
+
+static irqreturn_t qcom_lmh_dcvs_handle_irq(int irq, void *data)
+{
+	struct qcom_cpufreq_data *c_data = data;
+
+	/* Disable interrupt and enable polling */
+	disable_irq_nosync(c_data->lmh_dcvs_irq);
+	qcom_lmh_dcvs_notify(c_data);
+
+	return 0;
+}
+
  static const struct qcom_cpufreq_soc_data qcom_soc_data = {
  	.reg_enable = 0x0,
  	.reg_freq_lut = 0x110,
  	.reg_volt_lut = 0x114,
+	.reg_current_vote = 0x704,
  	.reg_perf_state = 0x920,
  	.lut_row_size = 32,
  };
@@ -274,6 +350,23 @@ static const struct of_device_id qcom_cpufreq_hw_match[] = {
  };
  MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match);
+static void qcom_cpufreq_hw_lmh_init(struct cpufreq_policy *policy)
+{
+	struct qcom_cpufreq_data *data = policy->driver_data;
+	struct platform_device *pdev = cpufreq_get_driver_data();
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	ret = devm_request_irq(dev, data->lmh_dcvs_irq, qcom_lmh_dcvs_handle_irq,
+			       0, "dcvsh-irq", data);
+	if (ret) {
+		dev_err(dev, "Error %d registering irq %x\n", ret, data->lmh_dcvs_irq);
+		return;
+	}
+	data->policy = policy;
+	INIT_DEFERRABLE_WORK(&data->lmh_dcvs_poll_work, qcom_lmh_dcvs_poll);
+}
+
  static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
  {
  	struct platform_device *pdev = cpufreq_get_driver_data();
@@ -370,6 +463,16 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
  			dev_warn(cpu_dev, "failed to enable boost: %d\n", ret);
  	}
+ /* Look for LMh interrupt. If no interrupt line is specified /
+	 * if there is an error, allow cpufreq to be enabled as usual.
+	 */

Proper comment style please..

+	data->lmh_dcvs_irq = platform_get_irq(pdev, index);
+	if (data->lmh_dcvs_irq > 0) {
+		qcom_cpufreq_hw_lmh_init(policy);
+	} else if (data->lmh_dcvs_irq != -ENXIO) {
+		ret = data->lmh_dcvs_irq;
+		goto error;
+	}

Move all of this to qcom_cpufreq_hw_lmh_init().

And I don't see any cleanup for this stuff. There is no guarantee that
the irq won't fire and queue up a work right after cpufreq driver is
unregistered and before the devm_ stuff gets released.

  	return 0;
  error:
  	kfree(data);
--
2.25.1






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux