Hello!
On 6/28/21 6:13 PM, Qing Zhang wrote:
> The module is now supported, enable it.
>
> Signed-off-by: Qing Zhang <zhangqing@xxxxxxxxxxx>
> ---
>
> v3-v4:
> No change
>
> Signed-off-by: Qing Zhang <zhangqing@xxxxxxxxxxx>
> ---
> arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
> index 569e814def83..e31176ac0ac2 100644
> --- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
> +++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
> @@ -101,6 +101,15 @@ uart0: serial@1fe00000 {
> no-loopback-test;
> };
>
> + pm: power-controller {
> + device_type = "power management";
> + compatible = "loongson, reset-controller";
No spaces allowed here, AFAIK.
> + reg = <0 0x1fe0700c 0 0x8>,
> + <0 0x1fe07014 0 0x8>,
> + <0 0x1fe07030 0 0x8>;
Better keep those aligned...
> + reg-names = "pm1_sts", "pm1_cnt", "rst_cnt";
> + };
> +
[...]
MBR, Sergei
