On 6/28/21 1:14 PM, Peng Fan wrote:
Subject: Re: [PATCH V7 4/4] soc: imx: Add blk-ctl driver for i.MX8MM
On 6/14/21 8:07 PM, Adam Ford wrote:
On Sat, Jun 12, 2021 at 7:58 AM Peng Fan (OSS) <peng.fan@xxxxxxxxxxx>
wrote:
From: Peng Fan <peng.fan@xxxxxxx>
The i.MX8MM SoC has dispmix BLK-CTL and vpumix BLK-CTL, so we add
that support in this driver.
Reviewed-by: Abel Vesa <abel.vesa@xxxxxxx>
Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
Maybe my TF-A is too old, but I am not able to wake the device from
suspend-to-ram with this series. I used the device tree from [1] to
enable both the GPCv2 and the blk-ctl stuff.
[1] -
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
hwork.kernel.org%2Fproject%2Flinux-arm-kernel%2Fpatch%2F20210604111
005
.6804-1-peng.fan%40oss.nxp.com%2F&data=04%7C01%7Cpeng.fan%4
0nxp.co
m%7Ca4c06cfdf6314633c7c708d93a23cff0%7C686ea1d3bc2b4c6fa92cd99c
5c30163
5%7C0%7C0%7C637604747755701757%7CUnknown%7CTWFpbGZsb3d8eyJ
WIjoiMC4wLjA
wMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&s
data=0
pDwVtfizZ7mZh9pSfy0bSbffOxP90AnaQrZ8i8cNv0%3D&reserved=0
I based both off Shawn's for-next branch.
I also ran into issues with this, although it could also be related to GPCv2. On
MX8MM , the system sometimes hangs when bringing up the GPCv2 power
domain 6 (VPUMIX). It seems that the GPCv2 driver sets
GPC_PU_PGC_SW_PUP_REQ register to 0x100 to bring up the VPUMIX and
the bit never self-clears. After that, it seems the entire GPC locks up.
Have you ever seen that kind of behavior ?
Do you have clk enabled for vpumix? Is this issue happends every time? Or hard
to reproduce?
Yes, DEC_ROOT is active, I also activated BUS.
It happens sporadically (every 5 or so reboots), I have to reboot the
machine a few times to trigger it. It happens during the kernel boot
process in every few boots.
