From: Shruthi Sanil <shruthi.sanil@xxxxxxxxx> The timer block supports 1 64-bit free running counter and 8 32-bit general purpose timers. Patch 1 holds the device tree binding documentation. Patch 2 holds the device driver. This driver is tested on the Keem Bay evaluation module board. Changes since v3: - Update in KConfig file to support COMPILE_TEST for Keem Bay timer. - Update in device tree bindings to remove status field. - Update in device tree bindings to remove 64-bit address space for the child nodes by using non-empty ranges. Changes since v2: - Add multi timer support. - Update in the device tree binding to support multi timers. - Code optimization. Changes since v1: - Add support for KEEMBAY_TIMER to get selected through Kconfig.platforms. - Add CLOCK_EVT_FEAT_DYNIRQ as part of clockevent feature. - Avoid overlapping reg regions across 2 device nodes. - Simplify 2 device nodes as 1 because both are from same IP block. - Adapt the driver code according to the new simplified devicetree. Shruthi Sanil (2): dt-bindings: timer: Add bindings for Intel Keem Bay SoC Timer clocksource: Add Intel Keem Bay timer support .../bindings/timer/intel,keembay-timer.yaml | 170 ++++++++++++ MAINTAINERS | 5 + drivers/clocksource/Kconfig | 11 + drivers/clocksource/Makefile | 1 + drivers/clocksource/timer-keembay.c | 255 ++++++++++++++++++ 5 files changed, 442 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml create mode 100644 drivers/clocksource/timer-keembay.c base-commit: 62fb9874f5da54fdb243003b386128037319b219 -- 2.17.1
