Quoting Robert Hancock (2021-03-25 12:26:40) > The driver was not previously programming the VDD_SEL values for each > output to indicate what external VDDO voltage was used for each. Add > ability to specify a regulator supplying the VDDO pin for each output of > the device. The voltage of the regulator is used to automatically set the > VDD_SEL value appropriately. If no regulator is specified and the chip is > being reconfigured, assume 2.5V which appears to be the chip default. > > Signed-off-by: Robert Hancock <robert.hancock@xxxxxxxxxx> > --- Applied to clk-next
