Re: [RFC 00/11] Intro to Hardware timestamping engine

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Jun 26, 2021 at 2:48 AM Dipen Patel <dipenp@xxxxxxxxxx> wrote:
>
> This patch series introduces new subsystem called hardware timestamping
> engine (HTE). It offers functionality such as timestamping through hardware
> means in realtime. The HTE subsystem centralizes HTE provider and consumers
> where providers can register themselves with subsystem and the consumers can
> request interested entity which could be lines, GPIO, signals or buses. The
> HTE subsystem provides timestamp in nano seconds, having said that the provider
> need to convert the timestamp if its not in that unit. There was upstream
> discussion about the same at
> https://lore.kernel.org/lkml/4c46726d-fa35-1a95-4295-bca37c8b6fe3@xxxxxxxxxx/
>
> To summarize upstream discussion:
> - It was heavily favoured by Linus and Kent to extend GPIOLIB and supporting
> GPIO drivers to add HTE functionality and I agreed to experiment with it.

I guess this series should include more people from different
companies, especially documentation parts. This may be used by
different hardware and quite different vendors. Developing a framework
like this for only one vendor is no go in general.

> This patch series implements and extends GPIOLIB and GPIO tegra driver.
> - Discussed possibility to add HTE provider as irqchip instead which
> was argued against as HTE devices are not necessarily event emitting
> devices.
> - Discussed other possibility if HTE device can be added as posix clock
> type like PTP clocks. That was also argues against since HTE devices
> are not necessarily tightly coupled with hardware clock.
>
> Typical HTE provider does following:
> - Register itself with HTE subsystem
> - Provide *request, *release, *enable, *disable timestamp callbacks and
> optional get_clk_src_info callback to HTE subsystem.
> - Provide optional xlate callback to the subsystem which can translate
> consumer provided logical ids into actual ids of the entity, where entity here
> is the provider dependent and could be GPIO, in chip lines or signals, buses
> etc...This converted id will be used between HTE subsystem and the provider for
> below bullet point.
> - Push timestamps to the subsystem. This happens when HTE provider has
> timestamp data available and willing to push it to HTE subsystem. The HTE
> subsystem stores it into software buffer for the consumers.
> - Unregister itself
>
> Typical HTE consumer does following:
> - Request interested entity it wishes to timestamp in realtime to the
> subsystem. During this call HTE subsystem allocates software buffer to
> store timestamps data.
> - The subsystem does necessary communications with the provider to
> complete the request, which includes translating logical id of the entity to
> provider dependent physical/actual id and enabling hardware timestamping on
> requested id.
> - It can optionally specify callback during registration, this cb will
> be called when provider pushes timestamps. Once notified through cb, the
> consumer can call retrieve API to read the data from the software buffer.
> If cb is not provided, the consumers can elect to call blocking version of
> retrieve API.
> - Manage pre allocated software buffer if needed. It includes changing buffer
> length and watermark/threshold. The subsystem automatically sets watermark or
> threshold at 1, consumers can later change it to any other value it wishes. The
> main purpose for having threshold functionality is to notify consumer either
> through callback if provided or unblock waiting consumer when threshold is
> reached.
> - Retrieve timestamp using various means provided by subsystem.
> - Release entity and its resources.
>
> HTE and GPIOLIB:
> - For the HTE provider which can timestamp GPIO lines.
> - For the GPIO consumers, either in kernel or userspace, The GPIOLIB and its
> CDEV framework are extended as frontend to the HTE by introducing new APIs.
> - Tegra194 AON GPIO controller has HTE support also known as GTE
> (Generic Timestamping Engine). The tegra gpio driver is modified to accommodate
> HTE functionality.
>
> Dipen Patel (11):
>   Documentation: Add HTE subsystem guide
>   drivers: Add HTE subsystem
>   hte: Add tegra194 HTE kernel provider
>   dt-bindings: Add HTE bindings
>   hte: Add Tegra194 IRQ HTE test driver
>   gpiolib: Add HTE support
>   gpio: tegra186: Add HTE in gpio-tegra186 driver
>   gpiolib: cdev: Add hardware timestamp clock type
>   tools: gpio: Add new hardware clock type
>   hte: Add tegra GPIO HTE test driver
>   MAINTAINERS: Added HTE Subsystem
>
>  .../bindings/gpio/nvidia,tegra186-gpio.txt    |    7 +
>  .../devicetree/bindings/hte/hte-consumer.yaml |   47 +
>  .../devicetree/bindings/hte/hte.yaml          |   34 +
>  .../bindings/hte/nvidia,tegra194-hte.yaml     |   83 +
>  Documentation/hte/hte.rst                     |  198 +++
>  Documentation/hte/index.rst                   |   21 +
>  Documentation/hte/tegra194-hte.rst            |   65 +
>  Documentation/index.rst                       |    1 +
>  MAINTAINERS                                   |    8 +
>  drivers/Kconfig                               |    2 +
>  drivers/Makefile                              |    1 +
>  drivers/gpio/gpio-tegra186.c                  |   78 +
>  drivers/gpio/gpiolib-cdev.c                   |   65 +-
>  drivers/gpio/gpiolib.c                        |   92 ++
>  drivers/gpio/gpiolib.h                        |   11 +
>  drivers/hte/Kconfig                           |   49 +
>  drivers/hte/Makefile                          |    4 +
>  drivers/hte/hte-tegra194-gpio-test.c          |  255 +++
>  drivers/hte/hte-tegra194-irq-test.c           |  400 +++++
>  drivers/hte/hte-tegra194.c                    |  554 +++++++
>  drivers/hte/hte.c                             | 1368 +++++++++++++++++
>  include/linux/gpio/consumer.h                 |   21 +-
>  include/linux/gpio/driver.h                   |   13 +
>  include/linux/hte.h                           |  278 ++++
>  include/uapi/linux/gpio.h                     |    1 +
>  tools/gpio/gpio-event-mon.c                   |    6 +-
>  26 files changed, 3657 insertions(+), 5 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/hte/hte-consumer.yaml
>  create mode 100644 Documentation/devicetree/bindings/hte/hte.yaml
>  create mode 100644 Documentation/devicetree/bindings/hte/nvidia,tegra194-hte.yaml
>  create mode 100644 Documentation/hte/hte.rst
>  create mode 100644 Documentation/hte/index.rst
>  create mode 100644 Documentation/hte/tegra194-hte.rst
>  create mode 100644 drivers/hte/Kconfig
>  create mode 100644 drivers/hte/Makefile
>  create mode 100644 drivers/hte/hte-tegra194-gpio-test.c
>  create mode 100644 drivers/hte/hte-tegra194-irq-test.c
>  create mode 100644 drivers/hte/hte-tegra194.c
>  create mode 100644 drivers/hte/hte.c
>  create mode 100644 include/linux/hte.h
>
> --
> 2.17.1
>


-- 
With Best Regards,
Andy Shevchenko



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux