Re: [PATCH v3 04/13] remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 25, 2021 at 12:21:58AM +0530, Sibi Sankar wrote:
> The power domains exposed by the AOSS QMP driver control the load state
> resources linked to modem, adsp, cdsp remoteprocs. These are used to
> notify the Always on Subsystem (AOSS) that a particular co-processor is
> up/down. AOSS uses this information to wait for the co-processors to
> suspend before starting its sleep sequence.
> 
> These co-processors enter low-power modes independent to that of the
> application processor and the load state resources linked to them are
> expected to remain unaltered across system suspend/resume cycles. To
> achieve this behavior lets stop using the power-domains exposed by the
> AOSS QMP node and replace them with generic qmp_send interface instead.
> 
> Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
> ---
>  drivers/remoteproc/qcom_q6v5.c      | 56 +++++++++++++++++++++++++-
>  drivers/remoteproc/qcom_q6v5.h      |  7 +++-
>  drivers/remoteproc/qcom_q6v5_adsp.c |  7 +++-
>  drivers/remoteproc/qcom_q6v5_mss.c  | 44 ++++----------------
>  drivers/remoteproc/qcom_q6v5_pas.c  | 80 +++++++++----------------------------
>  drivers/remoteproc/qcom_q6v5_wcss.c |  4 +-
>  6 files changed, 94 insertions(+), 104 deletions(-)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5.c b/drivers/remoteproc/qcom_q6v5.c
> index 9627a950928e..4a9a481c211b 100644
> --- a/drivers/remoteproc/qcom_q6v5.c
> +++ b/drivers/remoteproc/qcom_q6v5.c
> @@ -16,8 +16,28 @@
>  #include "qcom_common.h"
>  #include "qcom_q6v5.h"
>  
> +#define Q6V5_LOAD_STATE_MSG_LEN	64
>  #define Q6V5_PANIC_DELAY_MS	200
>  
> +static int q6v5_load_state_toggle(struct qcom_q6v5 *q6v5, bool enable)
> +{
> +	char buf[Q6V5_LOAD_STATE_MSG_LEN] = {};
> +	int ret;
> +
> +	if (IS_ERR(q6v5->qmp))
> +		return 0;
> +
> +	snprintf(buf, sizeof(buf),
> +		 "{class: image, res: load_state, name: %s, val: %s}",
> +		 q6v5->load_state, enable ? "on" : "off");
> +
> +	ret = qmp_send(q6v5->qmp, buf, sizeof(buf));
> +	if (ret)
> +		dev_err(q6v5->dev, "failed to toggle load state\n");
> +
> +	return ret;
> +}
> +
>  /**
>   * qcom_q6v5_prepare() - reinitialize the qcom_q6v5 context before start
>   * @q6v5:	reference to qcom_q6v5 context to be reinitialized
> @@ -26,6 +46,12 @@
>   */
>  int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5)
>  {
> +	int ret;
> +
> +	ret = q6v5_load_state_toggle(q6v5, true);
> +	if (ret)
> +		return ret;
> +
>  	reinit_completion(&q6v5->start_done);
>  	reinit_completion(&q6v5->stop_done);
>  
> @@ -47,6 +73,7 @@ EXPORT_SYMBOL_GPL(qcom_q6v5_prepare);
>  int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5)
>  {
>  	disable_irq(q6v5->handover_irq);
> +	q6v5_load_state_toggle(q6v5, false);
>  
>  	return !q6v5->handover_issued;
>  }
> @@ -196,12 +223,13 @@ EXPORT_SYMBOL_GPL(qcom_q6v5_panic);
>   * @pdev:	platform_device reference for acquiring resources
>   * @rproc:	associated remoteproc instance
>   * @crash_reason: SMEM id for crash reason string, or 0 if none
> + * @load_state: load state resource string
>   * @handover:	function to be called when proxy resources should be released
>   *
>   * Return: 0 on success, negative errno on failure
>   */
>  int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
> -		   struct rproc *rproc, int crash_reason,
> +		   struct rproc *rproc, int crash_reason, const char *load_state,
>  		   void (*handover)(struct qcom_q6v5 *q6v5))
>  {
>  	int ret;
> @@ -210,6 +238,7 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
>  	q6v5->dev = &pdev->dev;
>  	q6v5->crash_reason = crash_reason;
>  	q6v5->handover = handover;
> +	q6v5->load_state = kstrdup_const(load_state, GFP_KERNEL);
>  
>  	init_completion(&q6v5->start_done);
>  	init_completion(&q6v5->stop_done);
> @@ -286,9 +315,34 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
>  		return PTR_ERR(q6v5->state);
>  	}
>  
> +	q6v5->qmp = qmp_get(&pdev->dev);
> +	if (IS_ERR(q6v5->qmp)) {
> +		if (PTR_ERR(q6v5->qmp) != -ENODEV) {
> +			if (PTR_ERR(q6v5->qmp) != -EPROBE_DEFER)
> +				dev_err(&pdev->dev, "failed to acquire load state\n");
> +			return PTR_ERR(q6v5->qmp);
> +		}
> +	} else {
> +		if (!q6v5->load_state) {
> +			dev_err(&pdev->dev, "load state resource string empty\n");
> +			return -EINVAL;
> +		}
> +	}
> +
>  	return 0;
>  }
>  EXPORT_SYMBOL_GPL(qcom_q6v5_init);
>  
> +/**
> + * qcom_q6v5_deinit() - deinitialize the q6v5 common struct
> + * @q6v5:	reference to qcom_q6v5 context to be deinitialized
> + * @pdev:	platform_device reference for acquiring resources
> + */
> +void qcom_q6v5_deinit(struct qcom_q6v5 *q6v5, struct platform_device *pdev)
> +{

pdev isn't used, remove it?

	kfree_const(q6v5->load_state);

> +	qmp_put(q6v5->qmp);
> +}
> +EXPORT_SYMBOL_GPL(qcom_q6v5_deinit);
> +
>  MODULE_LICENSE("GPL v2");
>  MODULE_DESCRIPTION("Qualcomm Peripheral Image Loader for Q6V5");
> diff --git a/drivers/remoteproc/qcom_q6v5.h b/drivers/remoteproc/qcom_q6v5.h
> index 1c212f670cbc..3d9f525cb4ec 100644
> --- a/drivers/remoteproc/qcom_q6v5.h
> +++ b/drivers/remoteproc/qcom_q6v5.h
> @@ -5,6 +5,7 @@
>  
>  #include <linux/kernel.h>
>  #include <linux/completion.h>
> +#include <linux/soc/qcom/qcom_aoss.h>
>  
>  struct rproc;
>  struct qcom_smem_state;
> @@ -15,6 +16,8 @@ struct qcom_q6v5 {
>  	struct rproc *rproc;
>  
>  	struct qcom_smem_state *state;
> +	struct qmp *qmp;
> +
>  	unsigned stop_bit;
>  
>  	int wdog_irq;
> @@ -32,12 +35,14 @@ struct qcom_q6v5 {
>  
>  	bool running;
>  
> +	const char *load_state;
>  	void (*handover)(struct qcom_q6v5 *q6v5);
>  };
>  
>  int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
> -		   struct rproc *rproc, int crash_reason,
> +		   struct rproc *rproc, int crash_reason, const char *load_state,
>  		   void (*handover)(struct qcom_q6v5 *q6v5));
> +void qcom_q6v5_deinit(struct qcom_q6v5 *q6v5, struct platform_device *pdev);
>  
>  int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5);
>  int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5);
> diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
> index 8b0d8bbacd2e..0f5e0fd216b4 100644
> --- a/drivers/remoteproc/qcom_q6v5_adsp.c
> +++ b/drivers/remoteproc/qcom_q6v5_adsp.c
> @@ -185,7 +185,9 @@ static int adsp_start(struct rproc *rproc)
>  	int ret;
>  	unsigned int val;
>  
> -	qcom_q6v5_prepare(&adsp->q6v5);
> +	ret = qcom_q6v5_prepare(&adsp->q6v5);
> +	if (ret)
> +		return ret;
>  
>  	ret = clk_prepare_enable(adsp->xo);
>  	if (ret)
> @@ -465,7 +467,7 @@ static int adsp_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto disable_pm;
>  
> -	ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem,
> +	ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem, NULL,
>  			     qcom_adsp_pil_handover);

Doesn't passing a load_state of NULL cause qcom_q6v5_init() to fail with -EINVAL?

> --- a/drivers/remoteproc/qcom_q6v5_wcss.c
> +++ b/drivers/remoteproc/qcom_q6v5_wcss.c
> @@ -1044,8 +1044,7 @@ static int q6v5_wcss_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto free_rproc;
>  
> -	ret = qcom_q6v5_init(&wcss->q6v5, pdev, rproc, desc->crash_reason_smem,
> -			     NULL);
> +	ret = qcom_q6v5_init(&wcss->q6v5, pdev, rproc, desc->crash_reason_smem, NULL, NULL);

Same as for adsp_probe(), doesn't a load_state of NULL cause _init() to fail?



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux