[PATCH v3 11/11] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the basic dts file for i.MX8ULP EVK board.
Only the necessary devices for minimal system boot up are enabled:
enet, emmc, usb, console uart.

some of the devices' pin status may lost during low power mode,
so additional sleep pinctrl properties are included by default.

Signed-off-by: Jacky Bai <ping.bai@xxxxxxx>
---
 - v3 changes:
   no

 - v2 changes:
   add the memory node place holder
   update the license
---
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 148 ++++++++++++++++++
 2 files changed, 149 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 25806c4924cb..8c24a05d55af 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -65,5 +65,6 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
 
 dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
new file mode 100644
index 000000000000..de84f29c12ce
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8ulp.dtsi"
+
+/ {
+	model = "NXP i.MX8ULP EVK";
+	compatible = "fsl,imx8ulp-evk", "fsl,imx8ulp";
+
+	chosen {
+		stdout-path = &lpuart5;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			reg = <1>;
+			micrel,led-mode = <1>;
+		};
+	};
+};
+
+&lpuart5 {
+	/* console */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpuart5>;
+	pinctrl-1 = <&pinctrl_lpuart5>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_otgid1>;
+	pinctrl-1 = <&pinctrl_otgid1>;
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&usbmisc1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_otgid2>;
+	pinctrl-1 = <&pinctrl_otgid2>;
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
+
+&usbmisc2 {
+	status = "okay";
+};
+
+&usdhc0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	pinctrl-1 = <&pinctrl_usdhc0>;
+	non-removable;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc1 {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX8ULP_PAD_PTE15__ENET0_MDC     0x43
+			MX8ULP_PAD_PTE14__ENET0_MDIO    0x43
+			MX8ULP_PAD_PTE17__ENET0_RXER    0x43
+			MX8ULP_PAD_PTE18__ENET0_CRS_DV  0x43
+			MX8ULP_PAD_PTF1__ENET0_RXD0     0x43
+			MX8ULP_PAD_PTE20__ENET0_RXD1    0x43
+			MX8ULP_PAD_PTE16__ENET0_TXEN    0x43
+			MX8ULP_PAD_PTE23__ENET0_TXD0    0x43
+			MX8ULP_PAD_PTE22__ENET0_TXD1    0x43
+			MX8ULP_PAD_PTE19__ENET0_REFCLK  0x43
+			MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x43
+		>;
+	};
+
+	pinctrl_lpuart5: lpuart5grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTF14__LPUART5_TX	0x3
+			MX8ULP_PAD_PTF15__LPUART5_RX	0x3
+		>;
+	};
+
+	pinctrl_otgid1: usb1grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTF2__USB0_ID	0x10003
+		>;
+	};
+
+	pinctrl_otgid2: usb2grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTD23__USB1_ID	0x10003
+		>;
+	};
+
+	pinctrl_usdhc0: usdhc0grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTD1__SDHC0_CMD	0x43
+			MX8ULP_PAD_PTD2__SDHC0_CLK	0x10042
+			MX8ULP_PAD_PTD10__SDHC0_D0	0x43
+			MX8ULP_PAD_PTD9__SDHC0_D1	0x43
+			MX8ULP_PAD_PTD8__SDHC0_D2	0x43
+			MX8ULP_PAD_PTD7__SDHC0_D3	0x43
+			MX8ULP_PAD_PTD6__SDHC0_D4	0x43
+			MX8ULP_PAD_PTD5__SDHC0_D5	0x43
+			MX8ULP_PAD_PTD4__SDHC0_D6	0x43
+			MX8ULP_PAD_PTD3__SDHC0_D7	0x43
+			MX8ULP_PAD_PTD11__SDHC0_DQS	0x10042
+		>;
+	};
+};
-- 
2.26.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux