On Wednesday 23 July 2014 08:10 PM, Grygorii Strashko wrote:
On Keystone SOCs, DSP cores can send interrupts to ARM
host using the IRQ controller IP. It provides 28 IRQ
signals to ARM. The IRQ handler running on HOST OS can
identify DSP signal source by analyzing SRCCx bits in
IPCARx registers. This is one of the component used by
the IPC mechanism used on Keystone SOCs.
(...)
+Required Properties:
+- compatible: should be "ti,keystone-irq"
+- ti,syscon-dev : phandle and offset pair. The phandle to syscon used to
+ access device control registers and the offset inside
+ device control registers range.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+ source should be 1.
+- interrupts: interrupt reference to primary interrupt controller
proper indentation for the properties
- compatible : Should be "ti,keystone-irq"
- ti,syscon-dev : phandle and offset pair. The phandle to syscon used to
access device control registers and the offset inside
device control registers range.
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
(...)
+#include <linux/irq.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
Includes in alphabetical order...
Give one line gap before local includes..
...
#include <linux/regmap.h>
#include "irqchip.h"
+#include "irqchip.h"
+
+
+/* The source ID bits start from 4 to 31 (total 28 bits)*/
+#define BIT_OFS 4
+#define KEYSTONE_N_IRQ (32 - BIT_OFS)
+
+struct keystone_irq_device {
+ struct device *dev;
+ struct irq_chip chip;
+ u32 mask;
+ u32 irq;
+ struct irq_domain *irqd;
+ struct regmap *devctrl_regs;
+ u32 devctrl_offset;
+};
+
+static inline u32 keystone_irq_readl(struct keystone_irq_device *kirq)
+{
+ int ret;
+ u32 val = 0;
+
+ ret = regmap_read(kirq->devctrl_regs, kirq->devctrl_offset, &val);
+ if (ret < 0)
+ dev_dbg(kirq->dev, "irq read failed ret(%d)\n", ret);
+ return val;
+}
+
+static inline void
+keystone_irq_writel(struct keystone_irq_device *kirq, u32 value)
+{
+ int ret;
+
+ ret = regmap_write(kirq->devctrl_regs, kirq->devctrl_offset, value);
+ if (ret < 0)
+ dev_dbg(kirq->dev, "irq write failed ret(%d)\n", ret);
It can be like
if (!regmap_write(kirq->devctrl_regs, kirq->devctrl_offset, value))
dev_dbg(kirq->dev, "irq write failed \n");
+}
+
+
(...)
+}
+
+static int keystone_irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
should match open parenthesis:
static int keystone_irq_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
+{
+ struct keystone_irq_device *kirq = h->host_data;
+
+ irq_set_chip_data(virq, kirq);
+ irq_set_chip_and_handler(virq, &kirq->chip, handle_level_irq);
+ set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
+ return 0;
+}
+
+static struct irq_domain_ops keystone_irq_ops = {
+ .map = keystone_irq_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static int keystone_irq_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct keystone_irq_device *kirq;
+ int ret;
+
+ if (np == NULL)
+ return -EINVAL;
return -ENODEV??????
(...)
+static struct platform_driver keystone_irq_device_driver = {
+ .probe = keystone_irq_probe,
+ .remove = keystone_irq_remove,
+ .driver = {
+ .name = "keystone_irq",
+ .owner = THIS_MODULE,
No need to update it. Its done by module_platform_driver()..
+ .of_match_table = of_match_ptr(keystone_irq_dt_ids),
This driver is always populate through the dts file. So no need to use
of_match_ptr....
--
-Varka Bhadram
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
