[PATCH 2/2] remoteproc: pru: Add support for various PRU cores on K3 AM64x SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The K3 AM64x family of SoCs have a ICSSG IP that is similar to the
version on AM65x SR2.0 SoCs with some minor differences. The AM64x
SoCs contain two instances of this newer ICSSG IP. Each ICSSG processor
subsystem contains 2 primary PRU cores, 2 auxiliary PRU cores called
RTUs, and 2 new auxiliary cores called Transmit PRUs (Tx_PRUs).

Enhance the existing PRU remoteproc driver to support all these PRU,
RTU and Tx_PRU cores by using specific compatibles. The cores have the
same memory copying limitations as on AM65x, so reuses the custom memcpy
function within the driver's ELF loader implementation. The initial
names for the firmware images for each PRU core are retrieved from
DT nodes, and can be adjusted through sysfs if required.

Signed-off-by: Suman Anna <s-anna@xxxxxx>
---
 drivers/remoteproc/pru_rproc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
index e5778e476245..0ecf2675f5eb 100644
--- a/drivers/remoteproc/pru_rproc.c
+++ b/drivers/remoteproc/pru_rproc.c
@@ -894,6 +894,9 @@ static const struct of_device_id pru_rproc_match[] = {
 	{ .compatible = "ti,j721e-pru",		.data = &k3_pru_data },
 	{ .compatible = "ti,j721e-rtu",		.data = &k3_rtu_data },
 	{ .compatible = "ti,j721e-tx-pru",	.data = &k3_tx_pru_data },
+	{ .compatible = "ti,am642-pru",		.data = &k3_pru_data },
+	{ .compatible = "ti,am642-rtu",		.data = &k3_rtu_data },
+	{ .compatible = "ti,am642-tx-pru",	.data = &k3_tx_pru_data },
 	{},
 };
 MODULE_DEVICE_TABLE(of, pru_rproc_match);
-- 
2.30.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux