The SM4250 and SM6115 uses the same register layout as MSM8996, but the
tune sequence is a bit different.
Signed-off-by: Iskren Chernev <iskren.chernev@xxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qusb2.c | 34 +++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 8f1bf7e2186b..3c1d3b71c825 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -219,6 +219,22 @@ static const struct qusb2_phy_init_tbl msm8998_init_tbl[] = {
QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19),
};
+static const struct qusb2_phy_init_tbl sm6115_init_tbl[] = {
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xf8),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x53),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x81),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x17),
+
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
+
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
+
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
+};
+
static const unsigned int qusb2_v2_regs_layout[] = {
[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
[QUSB2PHY_PLL_STATUS] = 0x1a0,
@@ -342,6 +358,18 @@ static const struct qusb2_phy_cfg sdm660_phy_cfg = {
.autoresume_en = BIT(3),
};
+static const struct qusb2_phy_cfg sm6115_phy_cfg = {
+ .tbl = sm6115_init_tbl,
+ .tbl_num = ARRAY_SIZE(sm6115_init_tbl),
+ .regs = msm8996_regs_layout,
+
+ .has_pll_test = true,
+ .se_clk_scheme_default = true,
+ .disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
+ .mask_core_ready = PLL_LOCKED,
+ .autoresume_en = BIT(3),
+};
+
static const char * const qusb2_phy_vreg_names[] = {
"vdda-pll", "vdda-phy-dpdm",
};
@@ -888,6 +916,12 @@ static const struct of_device_id qusb2_phy_of_match_table[] = {
}, {
.compatible = "qcom,sdm660-qusb2-phy",
.data = &sdm660_phy_cfg,
+ }, {
+ .compatible = "qcom,sm4250-qusb2-phy",
+ .data = &sm6115_phy_cfg,
+ }, {
+ .compatible = "qcom,sm6115-qusb2-phy",
+ .data = &sm6115_phy_cfg,
}, {
/*
* Deprecated. Only here to support legacy device
--
2.31.1
