Re: [PATCH v7 3/5] soc: qcom: spm: Implement support for SAWv4.1, SDM630/660 L2 AVS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 22, 2021 at 04:11:15PM +0200, AngeloGioacchino Del Regno wrote:
> Implement the support for SAW v4.1, used in at least MSM8998,
> SDM630, SDM660 and APQ variants and, while at it, also add the
> configuration for the SDM630/660 Silver and Gold cluster L2
> Adaptive Voltage Scaler: this is also one of the prerequisites
> to allow the OSM controller to perform DCVS.
> 
> Please note that despite there are various "versions" of these
> values downstream, these are the only ones that are perfectly
> stable on the entire set of tested devices.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>

I can't say much about this platform but I trust that Angelo
knows what he is doing. :) I found the values used here in

https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/sdm660-pm.dtsi?h=LA.UM.8.2.r2-04600-sdm660.0&id=c2c950b468079a41c31d819051ffb8d9ad9eac8f

So I think it's okay to provide a (somewhat limited)
Reviewed-by: Stephan Gerhold <stephan@xxxxxxxxxxx>

> ---
>  drivers/soc/qcom/spm.c | 32 +++++++++++++++++++++++++++++---
>  include/soc/qcom/spm.h |  4 +++-
>  2 files changed, 32 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
> index 9b6f649c9a10..1401db8373dd 100644
> --- a/drivers/soc/qcom/spm.c
> +++ b/drivers/soc/qcom/spm.c
> @@ -32,10 +32,29 @@ enum spm_reg {
>  	SPM_REG_SEQ_ENTRY,
>  	SPM_REG_SPM_STS,
>  	SPM_REG_PMIC_STS,
> +	SPM_REG_AVS_CTL,
> +	SPM_REG_AVS_LIMIT,
>  	SPM_REG_NR,
>  };
>  
> -static const u8 spm_reg_offset_v2_1[SPM_REG_NR] = {
> +static const u16 spm_reg_offset_v4_1[SPM_REG_NR] = {
> +	[SPM_REG_AVS_CTL]	= 0x904,
> +	[SPM_REG_AVS_LIMIT]	= 0x908,
> +};
> +
> +static const struct spm_reg_data spm_reg_660_gold_l2  = {
> +	.reg_offset = spm_reg_offset_v4_1,
> +	.avs_ctl = 0x1010031,
> +	.avs_limit = 0x4580458,
> +};
> +
> +static const struct spm_reg_data spm_reg_660_silver_l2  = {
> +	.reg_offset = spm_reg_offset_v4_1,
> +	.avs_ctl = 0x101c031,
> +	.avs_limit = 0x4580458,
> +};
> +
> +static const u16 spm_reg_offset_v2_1[SPM_REG_NR] = {
>  	[SPM_REG_CFG]		= 0x08,
>  	[SPM_REG_SPM_CTL]	= 0x30,
>  	[SPM_REG_DLY]		= 0x34,
> @@ -54,7 +73,7 @@ static const struct spm_reg_data spm_reg_8974_8084_cpu  = {
>  	.start_index[PM_SLEEP_MODE_SPC] = 3,
>  };
>  
> -static const u8 spm_reg_offset_v1_1[SPM_REG_NR] = {
> +static const u16 spm_reg_offset_v1_1[SPM_REG_NR] = {
>  	[SPM_REG_CFG]		= 0x08,
>  	[SPM_REG_SPM_CTL]	= 0x20,
>  	[SPM_REG_PMIC_DLY]	= 0x24,
> @@ -126,6 +145,10 @@ void spm_set_low_power_mode(struct spm_driver_data *drv,
>  }
>  
>  static const struct of_device_id spm_match_table[] = {
> +	{ .compatible = "qcom,sdm660-gold-saw2-v4.1-l2",
> +	  .data = &spm_reg_660_gold_l2 },
> +	{ .compatible = "qcom,sdm660-silver-saw2-v4.1-l2",
> +	  .data = &spm_reg_660_silver_l2 },
>  	{ .compatible = "qcom,msm8974-saw2-v2.1-cpu",
>  	  .data = &spm_reg_8974_8084_cpu },
>  	{ .compatible = "qcom,apq8084-saw2-v2.1-cpu",
> @@ -169,6 +192,8 @@ static int spm_dev_probe(struct platform_device *pdev)
>  	 * CPU was held in reset, the reset signal could trigger the SPM state
>  	 * machine, before the sequences are completely written.
>  	 */
> +	spm_register_write(drv, SPM_REG_AVS_CTL, drv->reg_data->avs_ctl);
> +	spm_register_write(drv, SPM_REG_AVS_LIMIT, drv->reg_data->avs_limit);
>  	spm_register_write(drv, SPM_REG_CFG, drv->reg_data->spm_cfg);
>  	spm_register_write(drv, SPM_REG_DLY, drv->reg_data->spm_dly);
>  	spm_register_write(drv, SPM_REG_PMIC_DLY, drv->reg_data->pmic_dly);
> @@ -178,7 +203,8 @@ static int spm_dev_probe(struct platform_device *pdev)
>  				drv->reg_data->pmic_data[1]);
>  
>  	/* Set up Standby as the default low power mode */
> -	spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
> +	if (drv->reg_data->reg_offset[SPM_REG_SPM_CTL])
> +		spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
>  
>  	return 0;
>  }
> diff --git a/include/soc/qcom/spm.h b/include/soc/qcom/spm.h
> index 4c7e5ac2583d..4951f9d8b0bd 100644
> --- a/include/soc/qcom/spm.h
> +++ b/include/soc/qcom/spm.h
> @@ -21,11 +21,13 @@ enum pm_sleep_mode {
>  };
>  
>  struct spm_reg_data {
> -	const u8 *reg_offset;
> +	const u16 *reg_offset;
>  	u32 spm_cfg;
>  	u32 spm_dly;
>  	u32 pmic_dly;
>  	u32 pmic_data[MAX_PMIC_DATA];
> +	u32 avs_ctl;
> +	u32 avs_limit;
>  	u8 seq[MAX_SEQ_DATA];
>  	u8 start_index[PM_SLEEP_MODE_NR];
>  };
> -- 
> 2.32.0
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux