1.Add standard spi-cs-high support
2.Refer to spi-controller.yaml for details
Signed-off-by: Jon Lin <jon.lin@xxxxxxxxxxxxxx>
---
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
drivers/spi/spi-rockchip.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index fbd750b1d28e..540861ca2ba3 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -107,6 +107,8 @@
#define CR0_OPM_MASTER 0x0
#define CR0_OPM_SLAVE 0x1
+#define CR0_SOI_OFFSET 23
+
#define CR0_MTM_OFFSET 0x21
/* Bit fields in SER, 2bit */
@@ -236,7 +238,7 @@ static void rockchip_spi_set_cs(struct spi_device *spi, bool enable)
{
struct spi_controller *ctlr = spi->controller;
struct rockchip_spi *rs = spi_controller_get_devdata(ctlr);
- bool cs_asserted = !enable;
+ bool cs_asserted = spi->mode & SPI_CS_HIGH ? enable : !enable;
/* Return immediately for no-op */
if (cs_asserted == rs->cs_asserted[spi->chip_select])
@@ -507,6 +509,8 @@ static int rockchip_spi_config(struct rockchip_spi *rs,
cr0 |= (spi->mode & 0x3U) << CR0_SCPH_OFFSET;
if (spi->mode & SPI_LSB_FIRST)
cr0 |= CR0_FBM_LSB << CR0_FBM_OFFSET;
+ if (spi->mode & SPI_CS_HIGH)
+ cr0 |= BIT(spi->chip_select) << CR0_SOI_OFFSET;
if (xfer->rx_buf && xfer->tx_buf)
cr0 |= CR0_XFM_TR << CR0_XFM_OFFSET;
@@ -795,6 +799,14 @@ static int rockchip_spi_probe(struct platform_device *pdev)
ctlr->can_dma = rockchip_spi_can_dma;
}
+ switch (readl_relaxed(rs->regs + ROCKCHIP_SPI_VERSION)) {
+ case ROCKCHIP_SPI_VER2_TYPE2:
+ ctlr->mode_bits |= SPI_CS_HIGH;
+ break;
+ default:
+ break;
+ }
+
ret = devm_spi_register_controller(&pdev->dev, ctlr);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to register controller\n");
--
2.17.1
