Re: [PATCH v3 1/6] rtc: ls2x: Add support for the Loongson-2K/LS7A RTC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 06/05/2021 09:04:30+0800, WANG Xuerui wrote:
> This RTC module is integrated into the Loongson-2K SoC and the LS7A
> bridge chip. This version is almost entirely rewritten to make use of
> current kernel API.
> 
> Signed-off-by: Huacai Chen <chenhuacai@xxxxxxxxxx>
> Signed-off-by: WANG Xuerui <git@xxxxxxxxxx>
> ---
>  drivers/rtc/Kconfig    |  11 ++
>  drivers/rtc/Makefile   |   1 +
>  drivers/rtc/rtc-ls2x.c | 225 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 237 insertions(+)
>  create mode 100644 drivers/rtc/rtc-ls2x.c
> 
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index d8c13fded164..55beede68829 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -1304,6 +1304,17 @@ config RTC_DRV_NTXEC
>  	  embedded controller found in certain e-book readers designed by the
>  	  original design manufacturer Netronix.
>  
> +config RTC_DRV_LS2X
> +	tristate "Loongson LS2X RTC"
> +	depends on MACH_LOONGSON64 || COMPILE_TEST
> +	select REGMAP_MMIO
> +	help
> +	  If you say yes here you get support for the RTC on the Loongson-2K
> +	  SoC and LS7A bridge, which first appeared on the Loongson-2H.
> +
> +	  This driver can also be built as a module. If so, the module
> +	  will be called rtc-ls2x.
> +
>  comment "on-CPU RTC drivers"
>  
>  config RTC_DRV_ASM9260
> diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
> index 2dd0dd956b0e..6042ff1e73b7 100644
> --- a/drivers/rtc/Makefile
> +++ b/drivers/rtc/Makefile
> @@ -81,6 +81,7 @@ obj-$(CONFIG_RTC_DRV_LOONGSON1)	+= rtc-ls1x.o
>  obj-$(CONFIG_RTC_DRV_LP8788)	+= rtc-lp8788.o
>  obj-$(CONFIG_RTC_DRV_LPC24XX)	+= rtc-lpc24xx.o
>  obj-$(CONFIG_RTC_DRV_LPC32XX)	+= rtc-lpc32xx.o
> +obj-$(CONFIG_RTC_DRV_LS2X)	+= rtc-ls2x.o
>  obj-$(CONFIG_RTC_DRV_M41T80)	+= rtc-m41t80.o
>  obj-$(CONFIG_RTC_DRV_M41T93)	+= rtc-m41t93.o
>  obj-$(CONFIG_RTC_DRV_M41T94)	+= rtc-m41t94.o
> diff --git a/drivers/rtc/rtc-ls2x.c b/drivers/rtc/rtc-ls2x.c
> new file mode 100644
> index 000000000000..6508a87bdb31
> --- /dev/null
> +++ b/drivers/rtc/rtc-ls2x.c
> @@ -0,0 +1,225 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Loongson-2K/7A RTC driver
> + *
> + * Based on the out-of-tree Loongson-2H RTC driver for Linux 2.6.32, by
> + * Shaozong Liu <liushaozong@xxxxxxxxxxx>.
> + *
> + * Maintained out-of-tree by Huacai Chen <chenhuacai@xxxxxxxxxx>.
> + *
> + * Rewritten for mainline by WANG Xuerui <git@xxxxxxxxxx>.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/rtc.h>
> +#include <linux/spinlock.h>
> +
> +#define TOY_TRIM_REG   0x20
> +#define TOY_WRITE0_REG 0x24
> +#define TOY_WRITE1_REG 0x28
> +#define TOY_READ0_REG  0x2c
> +#define TOY_READ1_REG  0x30
> +#define TOY_MATCH0_REG 0x34
> +#define TOY_MATCH1_REG 0x38
> +#define TOY_MATCH2_REG 0x3c
> +#define RTC_CTRL_REG   0x40
> +#define RTC_TRIM_REG   0x60
> +#define RTC_WRITE0_REG 0x64
> +#define RTC_READ0_REG  0x68
> +#define RTC_MATCH0_REG 0x6c
> +#define RTC_MATCH1_REG 0x70
> +#define RTC_MATCH2_REG 0x74
> +
> +#define TOY_MON        GENMASK(31, 26)
> +#define TOY_MON_SHIFT  26
> +#define TOY_DAY        GENMASK(25, 21)
> +#define TOY_DAY_SHIFT  21
> +#define TOY_HOUR       GENMASK(20, 16)
> +#define TOY_HOUR_SHIFT 16
> +#define TOY_MIN        GENMASK(15, 10)
> +#define TOY_MIN_SHIFT  10
> +#define TOY_SEC        GENMASK(9, 4)
> +#define TOY_SEC_SHIFT  4
> +#define TOY_MSEC       GENMASK(3, 0)
> +#define TOY_MSEC_SHIFT 0
> +
> +struct ls2x_rtc_priv {
> +	struct regmap *regmap;
> +	spinlock_t lock;
> +};
> +
> +static const struct regmap_config ls2x_rtc_regmap_config = {
> +	.reg_bits = 32,
> +	.val_bits = 32,
> +	.reg_stride = 4,
> +};
> +
> +struct ls2x_rtc_regs {
> +	u32 reg0;
> +	u32 reg1;
> +};
> +
> +static inline void ls2x_rtc_regs_to_time(struct ls2x_rtc_regs *regs,
> +					 struct rtc_time *tm)
> +{
> +	tm->tm_year = regs->reg1;
> +	tm->tm_sec = (regs->reg0 & TOY_SEC) >> TOY_SEC_SHIFT;
> +	tm->tm_min = (regs->reg0 & TOY_MIN) >> TOY_MIN_SHIFT;
> +	tm->tm_hour = (regs->reg0 & TOY_HOUR) >> TOY_HOUR_SHIFT;
> +	tm->tm_mday = (regs->reg0 & TOY_DAY) >> TOY_DAY_SHIFT;
> +	tm->tm_mon = ((regs->reg0 & TOY_MON) >> TOY_MON_SHIFT) - 1;

Please use FIELD_GET

> +}
> +
> +static inline void ls2x_rtc_time_to_regs(struct rtc_time *tm,
> +					 struct ls2x_rtc_regs *regs)
> +{
> +	regs->reg0 = (tm->tm_sec << TOY_SEC_SHIFT) & TOY_SEC;
> +	regs->reg0 |= (tm->tm_min << TOY_MIN_SHIFT) & TOY_MIN;
> +	regs->reg0 |= (tm->tm_hour << TOY_HOUR_SHIFT) & TOY_HOUR;
> +	regs->reg0 |= (tm->tm_mday << TOY_DAY_SHIFT) & TOY_DAY;
> +	regs->reg0 |= ((tm->tm_mon + 1) << TOY_MON_SHIFT) & TOY_MON;

and FIELD_PREP, this should remove the need for *_SHIFT

> +	regs->reg1 = tm->tm_year;
> +}
> +
> +static int ls2x_rtc_read_time(struct device *dev, struct rtc_time *tm)
> +{
> +	struct ls2x_rtc_priv *priv = dev_get_drvdata(dev);
> +	struct ls2x_rtc_regs regs;
> +	int ret;
> +
> +	spin_lock_irq(&priv->lock);

What are you locking against?

> +
> +	ret = regmap_read(priv->regmap, TOY_READ1_REG, &regs.reg1);
> +	if (unlikely(ret)) {
> +		dev_err(dev, "Failed to read time: %d\n", ret);

Please avoid those error message, they are not that useful and bloat the
kernel.

> +		goto fail;
> +	}
> +
> +	ret = regmap_read(priv->regmap, TOY_READ0_REG, &regs.reg0);
> +	if (unlikely(ret)) {
> +		dev_err(dev, "Failed to read time: %d\n", ret);
> +		goto fail;
> +	}
> +
> +	spin_unlock_irq(&priv->lock);
> +
> +	ls2x_rtc_regs_to_time(&regs, tm);
> +
> +	return 0;
> +
> +fail:
> +	spin_unlock_irq(&priv->lock);
> +	return ret;
> +}
> +
> +static int ls2x_rtc_set_time(struct device *dev, struct rtc_time *tm)
> +{
> +	struct ls2x_rtc_priv *priv = dev_get_drvdata(dev);
> +	struct ls2x_rtc_regs regs;
> +	int ret;
> +
> +	ls2x_rtc_time_to_regs(tm, &regs);
> +
> +	spin_lock_irq(&priv->lock);
> +
> +	ret = regmap_write(priv->regmap, TOY_WRITE0_REG, regs.reg0);
> +	if (unlikely(ret)) {
> +		dev_err(dev, "Failed to set time: %d\n", ret);
> +		goto fail;
> +	}
> +
> +	ret = regmap_write(priv->regmap, TOY_WRITE1_REG, regs.reg1);
> +	if (unlikely(ret)) {
> +		dev_err(dev, "Failed to set time: %d\n", ret);
> +		goto fail;
> +	}
> +
> +	spin_unlock_irq(&priv->lock);
> +
> +	return 0;
> +
> +fail:
> +	spin_unlock_irq(&priv->lock);
> +	return ret;
> +}
> +
> +static struct rtc_class_ops ls2x_rtc_ops = {
> +	.read_time = ls2x_rtc_read_time,
> +	.set_time = ls2x_rtc_set_time,
> +};
> +
> +static int ls2x_rtc_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct rtc_device *rtc;
> +	struct ls2x_rtc_priv *priv;
> +	void __iomem *regs;
> +	int ret;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (unlikely(!priv))
> +		return -ENOMEM;
> +
> +	spin_lock_init(&priv->lock);
> +	platform_set_drvdata(pdev, priv);
> +
> +	regs = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(regs)) {
> +		ret = PTR_ERR(regs);
> +		dev_err(dev, "Failed to map rtc registers: %d\n", ret);

I'm pretty sure this error message is unnecessary

> +		return ret;
> +	}
> +
> +	priv->regmap = devm_regmap_init_mmio(dev, regs,
> +					     &ls2x_rtc_regmap_config);
> +	if (IS_ERR(priv->regmap)) {
> +		ret = PTR_ERR(priv->regmap);
> +		dev_err(dev, "Failed to init regmap: %d\n", ret);

ditto

> +		return ret;
> +	}
> +
> +	rtc = devm_rtc_allocate_device(dev);
> +	if (IS_ERR(rtc)) {
> +		ret = PTR_ERR(rtc);
> +		dev_err(dev, "Failed to allocate rtc device: %d\n", ret);

This on has to be removed.

> +		return ret;
> +	}
> +
> +	rtc->ops = &ls2x_rtc_ops;
> +
> +	/* Due to hardware erratum, all years multiple of 4 are considered
> +	 * leap year, so only years 2000 through 2099 are usable.
> +	 *
> +	 * Previous out-of-tree versions of this driver wrote tm_year directly
> +	 * into the year register, so epoch 2000 must be used to preserve
> +	 * semantics on shipped systems.
> +	 */
> +	rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
> +	rtc->range_max = RTC_TIMESTAMP_END_2099;
> +
> +	return devm_rtc_register_device(rtc);
> +}
> +
> +static const struct of_device_id ls2x_rtc_of_match[] = {
> +	{ .compatible = "loongson,ls2x-rtc" },
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, ls2x_rtc_of_match);
> +
> +static struct platform_driver ls2x_rtc_driver = {
> +	.probe		= ls2x_rtc_probe,
> +	.driver		= {
> +		.name	= "ls2x-rtc",
> +		.of_match_table = of_match_ptr(ls2x_rtc_of_match),
> +	},
> +};
> +
> +module_platform_driver(ls2x_rtc_driver);
> +
> +MODULE_DESCRIPTION("LS2X RTC driver");
> +MODULE_AUTHOR("WANG Xuerui");
> +MODULE_AUTHOR("Huacai Chen");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:ls2x-rtc");
> -- 
> 2.30.1
> 

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux