Convert the TI TSC2004/TSC2005 DT bindings to YAML schema.
Signed-off-by: Marek Vasut <marex@xxxxxxx>
Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Cc: Michael Welling <mwelling@xxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: kernel@xxxxxxxxxxxxxxxxxx
Cc: linux-input@xxxxxxxxxxxxxxx
To: devicetree@xxxxxxxxxxxxxxx
---
V2: - Switch the license to (GPL-2.0-only OR BSD-2-Clause)
V3: - Drop quotes, use enum: instead of oneOf+const
- Add maxItems to reg: and reset-gpios:
- Drop ref uint32
---
.../input/touchscreen/ti,tsc2005.yaml | 128 ++++++++++++++++++
.../bindings/input/touchscreen/tsc2005.txt | 64 ---------
2 files changed, 128 insertions(+), 64 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
new file mode 100644
index 000000000000..938aab016cc2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2005.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TSC2004 and TSC2005 touchscreen controller bindings
+
+maintainers:
+ - Marek Vasut <marex@xxxxxxx>
+ - Michael Welling <mwelling@xxxxxxxx>
+
+properties:
+ $nodename:
+ pattern: "^touchscreen(@.*)?$"
+
+ compatible:
+ enum:
+ - ti,tsc2004
+ - ti,tsc2005
+
+ reg:
+ maxItems: 1
+ description: |
+ I2C address when used on the I2C bus, or the SPI chip select index
+ when used on the SPI bus
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+ description: GPIO specifier for the controller reset line
+
+ spi-max-frequency:
+ description: TSC2005 SPI bus clock frequency.
+ maximum: 25000000
+
+ ti,x-plate-ohms:
+ description: resistance of the touchscreen's X plates in ohm (defaults to 280)
+
+ ti,esd-recovery-timeout-ms:
+ description: |
+ if the touchscreen does not respond after the configured time
+ (in milli seconds), the driver will reset it. This is disabled
+ by default.
+
+ vio-supply:
+ description: Regulator specifier
+
+ touchscreen-fuzz-pressure: true
+ touchscreen-fuzz-x: true
+ touchscreen-fuzz-y: true
+ touchscreen-max-pressure: true
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+
+allOf:
+ - $ref: touchscreen.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,tsc2004
+ then:
+ properties:
+ spi-max-frequency: false
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@48 {
+ compatible = "ti,tsc2004";
+ reg = <0x48>;
+ vio-supply = <&vio>;
+
+ reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+ interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>;
+
+ touchscreen-fuzz-x = <4>;
+ touchscreen-fuzz-y = <7>;
+ touchscreen-fuzz-pressure = <2>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
+ touchscreen-max-pressure = <2048>;
+
+ ti,x-plate-ohms = <280>;
+ ti,esd-recovery-timeout-ms = <8000>;
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@0 {
+ compatible = "ti,tsc2005";
+ spi-max-frequency = <6000000>;
+ reg = <0>;
+
+ vio-supply = <&vio>;
+
+ reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
+ interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
+
+ touchscreen-fuzz-x = <4>;
+ touchscreen-fuzz-y = <7>;
+ touchscreen-fuzz-pressure = <2>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
+ touchscreen-max-pressure = <2048>;
+
+ ti,x-plate-ohms = <280>;
+ ti,esd-recovery-timeout-ms = <8000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt
deleted file mode 100644
index b80c04b0e5c0..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* Texas Instruments tsc2004 and tsc2005 touchscreen controllers
-
-Required properties:
- - compatible : "ti,tsc2004" or "ti,tsc2005"
- - reg : Device address
- - interrupts : IRQ specifier
- - spi-max-frequency : Maximum SPI clocking speed of the device
- (for tsc2005)
-
-Optional properties:
- - vio-supply : Regulator specifier
- - reset-gpios : GPIO specifier for the controller reset line
- - ti,x-plate-ohms : integer, resistance of the touchscreen's X plates
- in ohm (defaults to 280)
- - ti,esd-recovery-timeout-ms : integer, if the touchscreen does not respond after
- the configured time (in milli seconds), the driver
- will reset it. This is disabled by default.
- - properties defined in touchscreen.txt
-
-Example:
-
-&i2c3 {
- tsc2004@48 {
- compatible = "ti,tsc2004";
- reg = <0x48>;
- vio-supply = <&vio>;
-
- reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
- interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>;
-
- touchscreen-fuzz-x = <4>;
- touchscreen-fuzz-y = <7>;
- touchscreen-fuzz-pressure = <2>;
- touchscreen-size-x = <4096>;
- touchscreen-size-y = <4096>;
- touchscreen-max-pressure = <2048>;
-
- ti,x-plate-ohms = <280>;
- ti,esd-recovery-timeout-ms = <8000>;
- };
-}
-
-&mcspi1 {
- tsc2005@0 {
- compatible = "ti,tsc2005";
- spi-max-frequency = <6000000>;
- reg = <0>;
-
- vio-supply = <&vio>;
-
- reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
- interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
-
- touchscreen-fuzz-x = <4>;
- touchscreen-fuzz-y = <7>;
- touchscreen-fuzz-pressure = <2>;
- touchscreen-size-x = <4096>;
- touchscreen-size-y = <4096>;
- touchscreen-max-pressure = <2048>;
-
- ti,x-plate-ohms = <280>;
- ti,esd-recovery-timeout-ms = <8000>;
- };
-}
--
2.30.2
