The PHYA architecture is updated, and doesn't support slew rate
calibration anymore on 7nm or advanced process, add a new version
number to support it.
Due to the FreqMeter bank is not used but reserved, it's backward
with v2 until now.
For mt8195, no function changes when use generic v2 or v3 compatible,
but prefer to use v3's compatible, it will not waste the time to
calibrate the slew rate, and also correspond with hardware version.
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
v2: add more commit log suggested by Rob
---
.../devicetree/bindings/phy/mediatek,tphy.yaml | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
index b8a7651a3d9a..939c09296b5f 100644
--- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
+++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
@@ -15,7 +15,7 @@ description: |
controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA.
Layout differences of banks between T-PHY V1 (mt8173/mt2701) and
- T-PHY V2 (mt2712) when works on USB mode:
+ T-PHY V2 (mt2712) / V3 (mt8195) when works on USB mode:
-----------------------------------
Version 1:
port offset bank
@@ -34,7 +34,7 @@ description: |
u2 port2 0x1800 U2PHY_COM
...
- Version 2:
+ Version 2/3:
port offset bank
u2 port0 0x0000 MISC
0x0100 FMREG
@@ -59,7 +59,8 @@ description: |
SPLLC shared by u3 ports and FMREG shared by u2 ports on V1 are put back
into each port; a new bank MISC for u2 ports and CHIP for u3 ports are
- added on V2.
+ added on V2; the FMREG bank for slew rate calibration is not used anymore
+ and reserved on V3;
properties:
$nodename:
@@ -79,8 +80,11 @@ properties:
- mediatek,mt2712-tphy
- mediatek,mt7629-tphy
- mediatek,mt8183-tphy
- - mediatek,mt8195-tphy
- const: mediatek,generic-tphy-v2
+ - items:
+ - enum:
+ - mediatek,mt8195-tphy
+ - const: mediatek,generic-tphy-v3
- const: mediatek,mt2701-u3phy
deprecated: true
- const: mediatek,mt2712-u3phy
@@ -91,7 +95,7 @@ properties:
description:
Register shared by multiple ports, exclude port's private register.
It is needed for T-PHY V1, such as mt2701 and mt8173, but not for
- T-PHY V2, such as mt2712.
+ T-PHY V2/V3, such as mt2712.
maxItems: 1
"#address-cells":
--
2.18.0
