Re: [PATCH 23/27] arm64: dts: mt8195: add gce node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Tinghan:

Tinghan Shen <tinghan.shen@xxxxxxxxxxxx> 於 2021年6月16日 週三 上午5:35寫道:
>
> From: Jason-JH Lin <jason-jh.lin@xxxxxxxxxxxx>
>
> add gce node on dts file.
>
> Signed-off-by: Jason-JH Lin <jason-jh.lin@xxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/mediatek/mt8195.dtsi | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> index d7d2c2a8f461..51edb8ee35a8 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> @@ -7,6 +7,7 @@
>  /dts-v1/;
>
>  #include <dt-bindings/clock/mt8195-clk.h>
> +#include <dt-bindings/gce/mt8195-gce.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/memory/mt8195-memory-port.h>
> @@ -1075,6 +1076,26 @@
>                         #clock-cells = <1>;
>                 };
>
> +               gce0: mdp_mailbox@10320000 {
> +                       compatible = "mediatek,mt8195-gce";

Where is the definition of this compatible?

> +                       reg = <0 0x10320000 0 0x4000>;
> +                       interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>;
> +                       #mbox-cells = <3>;
> +                       clocks = <&infracfg_ao CLK_INFRA_AO_GCE>,
> +                                <&infracfg_ao CLK_INFRA_AO_GCE2>;
> +                       clock-names = "gce0", "gce1";

According to the binding document [1], clock-names should be "gce".

[1] https://www.kernel.org/doc/Documentation/devicetree/bindings/mailbox/mtk-gce.txt

Regards,
Chun-Kuang.

> +               };
> +
> +               gce1: disp_mailbox@10330000 {
> +                       compatible = "mediatek,mt8195-gce";
> +                       reg = <0 0x10330000 0 0x4000>;
> +                       interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH 0>;
> +                       #mbox-cells = <3>;
> +                       clocks = <&infracfg_ao CLK_INFRA_AO_GCE>,
> +                                <&infracfg_ao CLK_INFRA_AO_GCE2>;
> +                       clock-names = "gce0", "gce1";
> +               };
> +
>                 uart0: serial@11001100 {
>                         compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart";
>                         reg = <0 0x11001100 0 0x100>;
> --
> 2.18.0
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-mediatek




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux