On Sun 13 Jun 03:05 CDT 2021, Martin Botka wrote:
> This commits add support for Sony Xperia 10II based on the SM6125 SoC.
>
> Currently working features:
> - dmesg output to bootloader preconfigured display
> - USB
> - eMMC
> - Volume down button
>
> Signed-off-by: Martin Botka <martin.botka@xxxxxxxxxxxxxx>
> ---
> Changes in v2, v3:
> None
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../qcom/sm6125-sony-xperia-seine-pdx201.dts | 105 ++++++++++++++++++
> 2 files changed, 106 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 456502aeee49..5a70dd9593c2 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -69,6 +69,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-enchilada.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> new file mode 100644
> index 000000000000..b1d6de430273
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> @@ -0,0 +1,105 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2021, Martin Botka <martin.botka@xxxxxxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "sm6125.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/input/gpio-keys.h>
> +
> +/ {
> + /* required for bootloader to select correct board */
> + qcom,msm-id = <394 0x10000>; /* sm6125 v1 */
> + qcom,board-id = <34 0>;
> +
> + model = "Sony Xperia 10 II";
> + compatible = "sony,pdx201", "qcom,sm6125";
> +
> + chosen {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + framebuffer0: framebuffer@5c000000 {
> + compatible = "simple-framebuffer";
> + reg = <0 0x5c000000 0 (2520 * 1080 * 4)>;
> + width = <1080>;
> + height = <2520>;
> + stride = <(1080 * 4)>;
> + format = "a8r8g8b8";
> + };
> + };
> +
> + extcon_usb: extcon-usb {
> + compatible = "linux,extcon-usb-gpio";
> + id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
> + };
> +
> + gpio_keys {
No '_' in node names, please go '-'.
> + status = "okay";
> + compatible = "gpio-keys";
> + input-name = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + autorepeat;
> +
> + vol_dn {
Ditto.
> + label = "Volume Down";
> + gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
> + linux,input-type = <1>;
> + linux,code = <KEY_VOLUMEDOWN>;
> + gpio-key,wakeup;
> + debounce-interval = <15>;
> + };
> + };
> +
Stray indentation on this line.
Thanks,
Bjorn
> + reserved_memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + debug_mem: memory@ffb00000 {
> + reg = <0x0 0xffb00000 0x0 0xc0000>;
> + no-map;
> + };
> +
> + last_log_mem: memory@ffbc0000 {
> + reg = <0x0 0xffbc0000 0x0 0x80000>;
> + no-map;
> + };
> +
> + pstore_mem: ramoops@ffc00000 {
> + compatible = "ramoops";
> + reg = <0x0 0xffc40000 0x0 0xc0000>;
> + record-size = <0x1000>;
> + console-size = <0x40000>;
> + msg-size = <0x20000 0x20000>;
> + };
> +
> + cmdline_mem: memory@ffd00000 {
> + reg = <0x0 0xffd40000 0x0 0x1000>;
> + no-map;
> + };
> + };
> +};
> +
> +&hsusb_phy1 {
> + status = "okay";
> +};
> +
> +&sdhc_1 {
> + status = "okay";
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <22 2>, <28 6>;
> +};
> +
> +&usb3 {
> + status = "okay";
> +};
> +
> +&usb3_dwc3 {
> + extcon = <&extcon_usb>;
> +};
> --
> 2.31.1
>
