Re: [PATCH v2 10/10] arm64: dts: qcom: sa8155p-adp: Add base dts file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Konrad,

Thanks for the review.

On Tue, 15 Jun 2021 at 20:23, Konrad Dybcio
<konrad.dybcio@xxxxxxxxxxxxxx> wrote:
>
> Hi,
>
>
> > +
> > +     reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
> > +
> > +     vcc-supply = <&vreg_l10a_2p96>;
> > +     vcc-max-microamp = <750000>;
> > +     vccq-supply = <&vreg_l5c_1p2>;
> > +     vccq-max-microamp = <700000>;
> > +     vccq2-supply = <&vreg_s4a_1p8>;
> > +     vccq2-max-microamp = <750000>;
>
> You need to add "regulator-allow-set-load;" to the mentioned supplies,
>
> as you're controlling the amperage here.

Ok, I will fix this in v3.

> > +};
> > +
> > +&ufs_mem_phy {
> > +     status = "okay";
> > +
> > +     vdda-phy-supply = <&vreg_l8c_1p2>;
> > +     vdda-max-microamp = <87100>;
> > +     vdda-pll-supply = <&vreg_l5a_0p88>;
> > +     vdda-pll-max-microamp = <18300>;
>
> Ditto

Sure, I will fix it in v3.

Thanks,
Bhupesh



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux