Define a 'ports' node for 'adv7511: hdmi-tx@39' to make it compliant with
the adi,adv7511 DT binding.
This fills the minimum requirements to meet the binding requirements,
remote endpoints are not defined.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@xxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Acked-by: Michal Simek <michal.simek@xxxxxxxxxx>
---
Michal, this was already reviewed and acked a long time ago but it never
made it into mainline. Can you take a look at it? Thanks.
arch/arm/boot/dts/zynq-zc702.dts | 10 ++++++++++
arch/arm/boot/dts/zynq-zc706.dts | 10 ++++++++++
2 files changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index cf70aff26c66..13b8ff1bced3 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -141,6 +141,16 @@ adv7511: hdmi-tx@39 {
adi,input-clock = "1x";
adi,input-style = <3>;
adi,input-justification = "right";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+ port@1 {
+ reg = <1>;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 77943c16d33f..99fa51ba6e93 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -93,6 +93,16 @@ adv7511: hdmi-tx@39 {
adi,input-clock = "1x";
adi,input-style = <3>;
adi,input-justification = "evenly";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+ port@1 {
+ reg = <1>;
+ };
+ };
};
};
--
2.25.1
