This commits adds the Device tree file for SM6125 SoC.
Signed-off-by: Martin Botka <martin.botka@xxxxxxxxxxxxxx>
---
Changes in V2:
Update compatibles for mailbox & pinctrl
arch/arm64/boot/dts/qcom/sm6125.dtsi | 603 +++++++++++++++++++++++++++
1 file changed, 603 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm6125.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
new file mode 100644
index 000000000000..44a5d789f749
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -0,0 +1,603 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Martin Botka <martin.botka@xxxxxxxxxxxxxx>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sm6125.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+ interrupt-parent = <&intc>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ clock-output-names = "xo_board";
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32000>;
+ clock-output-names = "sleep_clk";
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ };
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU4: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1638>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ compatible = "cache";
+ };
+ };
+
+ CPU5: cpu@101 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1638>;
+ next-level-cache = <&L2_1>;
+ };
+
+ CPU6: cpu@102 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x102>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1638>;
+ next-level-cache = <&L2_1>;
+ };
+
+ CPU7: cpu@103 {
+ device_type = "cpu";
+ compatible = "qcom,kryo260";
+ reg = <0x0 0x103>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1638>;
+ next-level-cache = <&L2_1>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+
+ core1 {
+ cpu = <&CPU5>;
+ };
+
+ core2 {
+ cpu = <&CPU6>;
+ };
+
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-sm6125", "qcom,scm";
+ #reset-cells = <1>;
+ };
+ };
+
+ tcsr_mutex: hwlock {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_regs 0 0x1000>;
+ #hwlock-cells = <1>;
+ };
+
+ memory@40000000 {
+ /* We expect the bootloader to fill in the size */
+ reg = <0x0 0x40000000 0x0 0x0>;
+ device_type = "memory";
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ hyp_mem: memory@45700000 {
+ reg = <0x0 0x45700000 0x0 0x600000>;
+ no-map;
+ };
+
+ xbl_aop_mem: memory@45e00000 {
+ reg = <0x0 0x45e00000 0x0 0x140000>;
+ no-map;
+ };
+
+ sec_apps_mem: memory@45fff000 {
+ reg = <0x0 0x45fff000 0x0 0x1000>;
+ no-map;
+ };
+
+ smem_mem: memory@46000000 {
+ reg = <0x0 0x46000000 0x0 0x200000>;
+ no-map;
+ };
+
+ reserved_mem1: memory@46200000 {
+ reg = <0x0 0x46200000 0x0 0x2d00000>;
+ no-map;
+ };
+
+ camera_mem: memory@4ab00000 {
+ reg = <0x0 0x4ab00000 0x0 0x500000>;
+ no-map;
+ };
+
+ modem_mem: memory@4b000000 {
+ reg = <0x0 0x4b000000 0x0 0x7e00000>;
+ no-map;
+ };
+
+ venus_mem: memory@52e00000 {
+ reg = <0x0 0x52e00000 0x0 0x500000>;
+ no-map;
+ };
+
+ wlan_msa_mem: memory@53300000 {
+ reg = <0x0 0x53300000 0x0 0x200000>;
+ no-map;
+ };
+
+ cdsp_mem: memory@53500000 {
+ reg = <0x0 0x53500000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ adsp_pil_mem: memory@55300000 {
+ reg = <0x0 0x55300000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ ipa_fw_mem: memory@57100000 {
+ reg = <0x0 0x57100000 0x0 0x10000>;
+ no-map;
+ };
+
+ ipa_gsi_mem: memory@57110000 {
+ reg = <0x0 0x57110000 0x0 0x5000>;
+ no-map;
+ };
+
+ gpu_mem: memory@57115000 {
+ reg = <0x0 0x57115000 0x0 0x2000>;
+ no-map;
+ };
+
+ cont_splash_mem: memory@5c000000 {
+ reg = <0x0 0x5c000000 0x0 0x00f00000>;
+ no-map;
+ };
+
+ dfps_data_mem: memory@5cf00000 {
+ reg = <0x0 0x5cf00000 0x0 0x0100000>;
+ no-map;
+ };
+
+ cdsp_sec_mem: memory@5f800000 {
+ reg = <0x0 0x5f800000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ qseecom_mem: memory@5e400000 {
+ reg = <0x0 0x5e400000 0x0 0x1400000>;
+ no-map;
+ };
+
+ sdsp_mem: memory@f3000000 {
+ reg = <0x0 0xf3000000 0x0 0x400000>;
+ no-map;
+ };
+
+ adsp_mem: memory@f3400000 {
+ reg = <0x0 0xf3400000 0x0 0x800000>;
+ no-map;
+ };
+
+ qseecom_ta_mem: memory@13fc00000 {
+ reg = <0x1 0x3fc00000 0x0 0x400000>;
+ no-map;
+ };
+ };
+
+ rpm-glink {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-sm6125";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+ };
+ };
+
+ smem: smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00 0x00 0x00 0xffffffff>;
+ compatible = "simple-bus";
+
+ tcsr_mutex_regs: syscon@340000 {
+ compatible = "syscon";
+ reg = <0x00340000 0x20000>;
+ };
+
+ tlmm: pinctrl@500000 {
+ compatible = "qcom,sm6125-tlmm";
+ reg = <0x00500000 0x400000>,
+ <0x00900000 0x400000>,
+ <0x00d00000 0x400000>;
+ reg-names = "west", "south", "east";
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&tlmm 0 0 134>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ sdc2_state_on: sdc2-on {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ sd-cd {
+ pins = "gpio98";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_state_off: sdc2-off {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sd-cd {
+ pins = "gpio98";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+ };
+
+ gcc: clock-controller@1400000 {
+ compatible = "qcom,gcc-sm6125";
+ reg = <0x01400000 0x1f0000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ clock-names = "bi_tcxo", "sleep_clk";
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+ };
+
+ hsusb_phy1: phy@1613000 {
+ compatible = "qcom,msm8996-qusb2-phy";
+ reg = <0x01613000 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&gcc GCC_AHB2PHY_USB_CLK>;
+ clock-names = "ref", "cfg_ahb";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+ status = "disabled";
+ };
+
+ rpm_msg_ram: memory@45f0000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0x045f0000 0x7000>;
+ };
+
+ sdhc_1: sdhci@4744000 {
+ compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x04744000 0x1000>, <0x04744000 0x1000>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "core", "xo";
+ bus-width = <8>;
+ non-removable;
+ status = "disabled";
+ };
+
+ sdhc_2: sdhci@4784000 {
+ compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x04784000 0x1000>;
+ reg-names = "hc_mem";
+
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "core", "xo";
+
+ pinctrl-0 = <&sdc2_state_on>;
+ pinctrl-1 = <&sdc2_state_off>;
+ pinctrl-names = "default", "sleep";
+
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usb3: usb@4ef8800 {
+ compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+ reg = <0x04ef8800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <66666667>;
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+ qcom,select-utmi-as-pipe-clk;
+ status = "disabled";
+
+ usb3_dwc3: dwc3@4e00000 {
+ compatible = "snps,dwc3";
+ reg = <0x04e00000 0xcd00>;
+ interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hsusb_phy1>;
+ phy-names = "usb2-phy";
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ maximum-speed = "high-speed";
+ dr_mode = "peripheral";
+ };
+ };
+
+ spmi_bus: spmi@1c40000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x01c40000 0x1100>,
+ <0x01e00000 0x2000000>,
+ <0x03e00000 0x100000>,
+ <0x03f00000 0xa0000>,
+ <0x01c0a000 0x26000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ cell-index = <0>;
+ };
+
+ apcs_glb: mailbox@f111000 {
+ compatible = "qcom,sm6125-apcs-hmss-global";
+ reg = <0x0f111000 0x1000>;
+
+ #mbox-cells = <1>;
+ };
+
+ timer@f120000 {
+ compatible = "arm,armv7-timer-mem";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ reg = <0x0f120000 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@0f121000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0f121000 0x1000>,
+ <0x0f122000 0x1000>;
+ };
+
+ frame@0f123000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0f123000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@0f124000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0f124000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f125000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0f125000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f126000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0f126000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f127000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0f127000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f128000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0f128000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ intc: interrupt-controller@f200000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0f200000 0x20000>,
+ <0x0f300000 0x100000>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 1 0xf08
+ GIC_PPI 2 0xf08
+ GIC_PPI 3 0xf08
+ GIC_PPI 0 0xf08>;
+ clock-frequency = <19200000>;
+ };
+};
--
2.31.1
