RE: [RFC v2 PATCH 5/7] dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Lars-Peter Clausen <lars@xxxxxxxxxx>
> Sent: Thursday, April 15, 2021 12:39 PM
> To: Radhey Shyam Pandey <radheys@xxxxxxxxxx>; vkoul@xxxxxxxxxx;
> robh+dt@xxxxxxxxxx; Michal Simek <michals@xxxxxxxxxx>
> Cc: dmaengine@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; git
> <git@xxxxxxxxxx>
> Subject: Re: [RFC v2 PATCH 5/7] dmaengine: xilinx_dma: Freeup active list
> based on descriptor completion bit
> 
> On 4/9/21 7:56 PM, Radhey Shyam Pandey wrote:
> > AXIDMA IP in SG mode sets completion bit to 1 when the transfer is
> > completed. Read this bit to move descriptor from active list to the
> > done list. This feature is needed when interrupt delay timeout and
> > IRQThreshold is enabled i.e Dly_IrqEn is triggered w/o completing
> > interrupt threshold.
> >
> > Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxxxxx>
> > ---
> > - Check BD completion bit only for SG mode.
> > - Modify the logic to have early return path.
> > ---
> >   drivers/dma/xilinx/xilinx_dma.c | 7 +++++++
> >   1 file changed, 7 insertions(+)
> >
> > diff --git a/drivers/dma/xilinx/xilinx_dma.c
> > b/drivers/dma/xilinx/xilinx_dma.c index 890bf46b36e5..f2305a73cb91
> > 100644
> > --- a/drivers/dma/xilinx/xilinx_dma.c
> > +++ b/drivers/dma/xilinx/xilinx_dma.c
> > @@ -177,6 +177,7 @@
> >   #define XILINX_DMA_CR_COALESCE_SHIFT	16
> >   #define XILINX_DMA_BD_SOP		BIT(27)
> >   #define XILINX_DMA_BD_EOP		BIT(26)
> > +#define XILINX_DMA_BD_COMP_MASK		BIT(31)
> >   #define XILINX_DMA_COALESCE_MAX		255
> >   #define XILINX_DMA_NUM_DESCS		512
> >   #define XILINX_DMA_NUM_APP_WORDS	5
> > @@ -1683,12 +1684,18 @@ static void xilinx_dma_issue_pending(struct
> dma_chan *dchan)
> >   static void xilinx_dma_complete_descriptor(struct xilinx_dma_chan
> *chan)
> >   {
> >   	struct xilinx_dma_tx_descriptor *desc, *next;
> > +	struct xilinx_axidma_tx_segment *seg;
> >
> >   	/* This function was invoked with lock held */
> >   	if (list_empty(&chan->active_list))
> >   		return;
> >
> >   	list_for_each_entry_safe(desc, next, &chan->active_list, node) {
> > +		/* TODO: remove hardcoding for axidma_tx_segment */
> > +		seg = list_last_entry(&desc->segments,
> > +				      struct xilinx_axidma_tx_segment, node);
> This needs to be fixed before this can be merged as it right now will break
> the non AXIDMA variants.

I agree, mentioned it in TODO to remove axidma specific hardcoding.
Will fix it next version.

Thanks,
Radhey
> > +		if (!(seg->hw.status & XILINX_DMA_BD_COMP_MASK) &&
> chan->has_sg)
> > +			break;
> >   		if (chan->has_sg && chan->xdev->dma_config->dmatype !=
> >   		    XDMA_TYPE_VDMA)
> >   			desc->residue = xilinx_dma_get_residue(chan, desc);
> 





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux