On Mon, Jul 21, 2014 at 11:34 AM, Zhang Rui <rui.zhang@xxxxxxxxx> wrote:
> On Fri, 2014-07-18 at 09:00 +0900, Chanwoo Choi wrote:
>> This patch adds the registers, bit fields and compatible strings
>> required to support for the 1 TMU channels on Exynos3250.
>>
>> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
>> [Add MUX address setting bits by Jonghwa Lee]
>> Signed-off-by: Jonghwa Lee <jonghwa3.lee@xxxxxxxxxxx>
>> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
>> Reviewed-by: Amit Daniel Kachhap<amit.daniel@xxxxxxxxxxx>
>
> Eduardo and Amit,
>
> do you have any comments on this?
The changes looks fine to me. I already reviewed these patches earlier.
thanks,
Amit
>
> thanks,
> rui
>
>> ---
>> .../devicetree/bindings/thermal/exynos-thermal.txt | 1 +
>> drivers/thermal/samsung/exynos_tmu.c | 7 +-
>> drivers/thermal/samsung/exynos_tmu.h | 3 +-
>> drivers/thermal/samsung/exynos_tmu_data.c | 89 ++++++++++++++++++++++
>> drivers/thermal/samsung/exynos_tmu_data.h | 7 ++
>> 5 files changed, 105 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
>> index c949092..ae738f5 100644
>> --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
>> +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
>> @@ -3,6 +3,7 @@
>> ** Required properties:
>>
>> - compatible : One of the following:
>> + "samsung,exynos3250-tmu"
>> "samsung,exynos4412-tmu"
>> "samsung,exynos4210-tmu"
>> "samsung,exynos5250-tmu"
>> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
>> index d7ca9f4..a2a08ea 100644
>> --- a/drivers/thermal/samsung/exynos_tmu.c
>> +++ b/drivers/thermal/samsung/exynos_tmu.c
>> @@ -505,6 +505,10 @@ static irqreturn_t exynos_tmu_irq(int irq, void *id)
>>
>> static const struct of_device_id exynos_tmu_match[] = {
>> {
>> + .compatible = "samsung,exynos3250-tmu",
>> + .data = (void *)EXYNOS3250_TMU_DRV_DATA,
>> + },
>> + {
>> .compatible = "samsung,exynos4210-tmu",
>> .data = (void *)EXYNOS4210_TMU_DRV_DATA,
>> },
>> @@ -677,7 +681,8 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>> goto err_clk_sec;
>> }
>>
>> - if (pdata->type == SOC_ARCH_EXYNOS4210 ||
>> + if (pdata->type == SOC_ARCH_EXYNOS3250 ||
>> + pdata->type == SOC_ARCH_EXYNOS4210 ||
>> pdata->type == SOC_ARCH_EXYNOS4412 ||
>> pdata->type == SOC_ARCH_EXYNOS5250 ||
>> pdata->type == SOC_ARCH_EXYNOS5260 ||
>> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
>> index edd08cf..1b4a644 100644
>> --- a/drivers/thermal/samsung/exynos_tmu.h
>> +++ b/drivers/thermal/samsung/exynos_tmu.h
>> @@ -40,7 +40,8 @@ enum calibration_mode {
>> };
>>
>> enum soc_type {
>> - SOC_ARCH_EXYNOS4210 = 1,
>> + SOC_ARCH_EXYNOS3250 = 1,
>> + SOC_ARCH_EXYNOS4210,
>> SOC_ARCH_EXYNOS4412,
>> SOC_ARCH_EXYNOS5250,
>> SOC_ARCH_EXYNOS5260,
>> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
>> index c1d81dc..aa8e0de 100644
>> --- a/drivers/thermal/samsung/exynos_tmu_data.c
>> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
>> @@ -90,6 +90,95 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
>> };
>> #endif
>>
>> +#if defined(CONFIG_SOC_EXYNOS3250)
>> +static const struct exynos_tmu_registers exynos3250_tmu_registers = {
>> + .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
>> + .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
>> + .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
>> + .tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
>> + .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
>> + .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
>> + .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
>> + .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
>> + .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
>> + .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
>> + .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
>> + .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
>> + .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
>> + .tmu_status = EXYNOS_TMU_REG_STATUS,
>> + .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
>> + .threshold_th0 = EXYNOS_THD_TEMP_RISE,
>> + .threshold_th1 = EXYNOS_THD_TEMP_FALL,
>> + .tmu_inten = EXYNOS_TMU_REG_INTEN,
>> + .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
>> + .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
>> + .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
>> + .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
>> + .tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
>> + .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
>> + .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
>> + .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
>> + .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
>> + .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
>> + .emul_con = EXYNOS_EMUL_CON,
>> + .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
>> + .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
>> + .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
>> +};
>> +
>> +#define EXYNOS3250_TMU_DATA \
>> + .threshold_falling = 10, \
>> + .trigger_levels[0] = 70, \
>> + .trigger_levels[1] = 95, \
>> + .trigger_levels[2] = 110, \
>> + .trigger_levels[3] = 120, \
>> + .trigger_enable[0] = true, \
>> + .trigger_enable[1] = true, \
>> + .trigger_enable[2] = true, \
>> + .trigger_enable[3] = false, \
>> + .trigger_type[0] = THROTTLE_ACTIVE, \
>> + .trigger_type[1] = THROTTLE_ACTIVE, \
>> + .trigger_type[2] = SW_TRIP, \
>> + .trigger_type[3] = HW_TRIP, \
>> + .max_trigger_level = 4, \
>> + .gain = 8, \
>> + .reference_voltage = 16, \
>> + .noise_cancel_mode = 4, \
>> + .cal_type = TYPE_TWO_POINT_TRIMMING, \
>> + .efuse_value = 55, \
>> + .min_efuse_value = 40, \
>> + .max_efuse_value = 100, \
>> + .first_point_trim = 25, \
>> + .second_point_trim = 85, \
>> + .default_temp_offset = 50, \
>> + .freq_tab[0] = { \
>> + .freq_clip_max = 800 * 1000, \
>> + .temp_level = 70, \
>> + }, \
>> + .freq_tab[1] = { \
>> + .freq_clip_max = 400 * 1000, \
>> + .temp_level = 95, \
>> + }, \
>> + .freq_tab_count = 2, \
>> + .registers = &exynos3250_tmu_registers, \
>> + .features = (TMU_SUPPORT_EMULATION | \
>> + TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
>> + TMU_SUPPORT_EMUL_TIME)
>> +#endif
>> +
>> +#if defined(CONFIG_SOC_EXYNOS3250)
>> +struct exynos_tmu_init_data const exynos3250_default_tmu_data = {
>> + .tmu_data = {
>> + {
>> + EXYNOS3250_TMU_DATA,
>> + .type = SOC_ARCH_EXYNOS3250,
>> + .test_mux = EXYNOS4412_MUX_ADDR_VALUE,
>> + },
>> + },
>> + .tmu_count = 1,
>> +};
>> +#endif
>> +
>> #if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
>> static const struct exynos_tmu_registers exynos4412_tmu_registers = {
>> .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
>> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
>> index d268981..f0979e5 100644
>> --- a/drivers/thermal/samsung/exynos_tmu_data.h
>> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
>> @@ -148,6 +148,13 @@
>> #define EXYNOS5440_TMU_TH_RISE4_SHIFT 24
>> #define EXYNOS5440_EFUSE_SWAP_OFFSET 8
>>
>> +#if defined(CONFIG_SOC_EXYNOS3250)
>> +extern struct exynos_tmu_init_data const exynos3250_default_tmu_data;
>> +#define EXYNOS3250_TMU_DRV_DATA (&exynos3250_default_tmu_data)
>> +#else
>> +#define EXYNOS3250_TMU_DRV_DATA (NULL)
>> +#endif
>> +
>> #if defined(CONFIG_CPU_EXYNOS4210)
>> extern struct exynos_tmu_init_data const exynos4210_default_tmu_data;
>> #define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data)
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
