This patch add DT binding documentation for Exynos3250 ADC IP. Exynos3250 has special clock ('sclk_adc') for ADC which provide clock to internal ADC. Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> Reviewed-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx> Reviewed-by: Tomasz Figa <t.figa@xxxxxxxxxxx> Acked-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx> Acked-by: Arnd Bergmann <arnd@xxxxxxxx> --- .../devicetree/bindings/arm/samsung/exynos-adc.txt | 25 ++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt index 832fe8c..adc61b0 100644 --- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt @@ -14,14 +14,21 @@ Required properties: for exynos4412/5250 controllers. Must be "samsung,exynos-adc-v2" for future controllers. + Must be "samsung,exynos3250-adc" for + controllers compatible with ADC of Exynos3250. - reg: Contains ADC register address range (base address and length) and the address of the phy enable register. - interrupts: Contains the interrupt information for the timer. The format is being dependent on which interrupt controller the Samsung device uses. - #io-channel-cells = <1>; As ADC has multiple outputs -- clocks From common clock binding: handle to adc clock. -- clock-names From common clock binding: Shall be "adc". +- clocks From common clock bindings: handles to clocks specified + in "clock-names" property, in the same order. +- clock-names From common clock bindings: list of clock input names + used by ADC block: + - "adc" : ADC bus clock + - "sclk" : ADC special clock (only for Exynos3250 and + compatible ADC block) - vdd-supply VDD input supply. Note: child nodes can be added for auto probing from device tree. @@ -41,6 +48,20 @@ adc: adc@12D10000 { vdd-supply = <&buck5_reg>; }; +Example: adding device info in dtsi file for Exynos3250 with additional sclk + +adc: adc@126C0000 { + compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2; + reg = <0x126C0000 0x100>, <0x10020718 0x4>; + interrupts = <0 137 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; + clock-names = "adc", "sclk"; + + vdd-supply = <&buck5_reg>; +}; Example: Adding child nodes in dts file -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html