This enables the USB hardware needed to access devices on the sockets J1 and J13. Signed-off-by: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx> --- .../dts/rockchip/rk3399-kobol-helios64.dts | 44 +++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts index 037dc5cdc3f3..c142649cd1bd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts @@ -155,6 +155,20 @@ regulator-state-mem { }; }; + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_en>; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_perdev>; + }; + vcc12v_dcin: vcc12v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -407,6 +421,12 @@ pmic_int_l: pmic-int-l { }; }; + power { + vcc5v0_usb_en: vcc5v0-usb-en { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + vcc3v0-sd { sdmmc0_pwr_h: sdmmc0-pwr-h { rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; @@ -449,6 +469,30 @@ &sdmmc { status = "okay"; }; +&tcphy1 { + // phy for &usbdrd_dwc3_1 + status = "okay"; +}; + +&u2phy1 { + status = "okay"; + + otg-port { + // phy for &usbdrd_dwc3_1 + phy-supply = <&vcc5v0_usb> + status = "okay"; + }; +}; + &uart2 { status = "okay"; }; + +&usbdrd3_1 { + status = "okay"; + + usb@fe900000 { + dr_mode = "host"; + status = "okay"; + }; +}; -- 2.30.2