Re: [PATCH V1] arm64: dts: qcom: sc7180: Added xo clock for eMMC and Sd card

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu 10 Jun 02:54 CDT 2021, Konrad Dybcio wrote:

> Hi,
> 
> 
> > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > @@ -701,8 +701,9 @@
> >  			interrupt-names = "hc_irq", "pwr_irq";
> >  
> >  			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
> > -					<&gcc GCC_SDCC1_AHB_CLK>;
> > -			clock-names = "core", "iface";
> > +					<&gcc GCC_SDCC1_AHB_CLK>,
> > +					<&rpmhcc RPMH_CXO_CLK>;
> 
> Don't these clocks fit in 100 chars?
> 

We typically list them on one line each, so I'm fine with that.

But all three clocks should be aligned.

> 
> 
> > +			clock-names = "core", "iface","xo";
> 
> A space is missing before "xo".
> 

Thanks for pointing this out.

I fixed up the indentation and applied the patch.

Regards,
Bjorn

> 
> 
> >  			interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>,
> >  					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>;
> >  			interconnect-names = "sdhc-ddr","cpu-sdhc";
> > @@ -2666,8 +2667,9 @@
> >  			interrupt-names = "hc_irq", "pwr_irq";
> >  
> >  			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
> > -					<&gcc GCC_SDCC2_AHB_CLK>;
> > -			clock-names = "core", "iface";
> > +					<&gcc GCC_SDCC2_AHB_CLK>,
> > +					<&rpmhcc RPMH_CXO_CLK>;
> 
> Ditto
> 
> 
> 
> Konrad
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux