On 6/10/21 3:09 AM, Geert Uytterhoeven wrote:
> - Add missing "additionalProperties: false" for subnodes, to catch
> typos in properties,
> - Fix property names in example.
>
> Fixes: 45c940184b501fc6 ("dt-bindings: clk: versaclock5: convert to yaml")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> Reviewed-by: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> Acked-by: Stephen Boyd <sboyd@xxxxxxxxxx>
> ---
> This depends on dt-schema v2021.2.1.
>
> v6:
> - Rebase on top of commit c17611592d9635c4 ("dt-bindings: More
> removals of type references on common properties"), which already
> removed unneeded references for "idt,xtal-load-femtofarads" and
> "idt,slew-percent",
>
> v5:
> - Drop reference for "idt,xtal-load-femtofarads",
>
> v4:
> - Add Reviewed-by, Acked-by,
>
> v3:
> - Drop references for "idt,voltage-microvolt" and "idt,slew-percent",
>
> v2:
> - Settle on "idt,voltage-microvolt", cfr. commit 4b003f5fcadfa2d0
> ('clk: vc5: Use "idt,voltage-microvolt" instead of
> "idt,voltage-microvolts"'),
> - Drop reference to clock.yaml, which is already applied
> unconditionally,
> - Drop removal of allOf around if condition, as it is unnecessary
> churn.
> ---
> .../devicetree/bindings/clock/idt,versaclock5.yaml | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
> index 28675b0b80f1ba53..434212320c9aa7ab 100644
> --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
> +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
> @@ -85,6 +85,8 @@ patternProperties:
> description: The Slew rate control for CMOS single-ended.
> enum: [ 80, 85, 90, 100 ]
>
> + additionalProperties: false
> +
> required:
> - compatible
> - reg
> @@ -139,13 +141,13 @@ examples:
> clock-names = "xin";
>
> OUT1 {
> - idt,drive-mode = <VC5_CMOSD>;
> - idt,voltage-microvolts = <1800000>;
> + idt,mode = <VC5_CMOSD>;
> + idt,voltage-microvolt = <1800000>;
> idt,slew-percent = <80>;
> };
>
> OUT4 {
> - idt,drive-mode = <VC5_LVDS>;
> + idt,mode = <VC5_LVDS>;
> };
> };
> };
>
I lost an hour the other day tracking down why my clocks weren't
configured correctly because I had copied my base configuration from the
example here.
Reviewed-by: Sean Anderson <sean.anderson@xxxxxxxx>
