Re: [PATCH 09/13] ARM: dts: stm32: fix stpmic node for stm32mp1 boards

[Alexandre TORGUE <alexandre.torgue@xxxxxxxxxxx>]

On 4/15/21 12:10 PM, Alexandre Torgue wrote:
> On some STM32 MP15 boards, stpmic node is not correct which generates
> warnings running "make dtbs_check W=1" command. Issues are:
>
> -"regulator-active-discharge" is not a boolean but an uint32.
> -"regulator-over-current-protection" is not a valid entry for vref_ddr.
> -LDO4 has a fixed voltage (3v3) so min/max entries are not allowed.
>
> Signed-off-by: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx>

Applied on stm32-next.

Thanks.
Alex

> diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
> index 113c48b2ef93..a4b14ef3caee 100644
> --- a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
> +++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
> @@ -184,8 +184,6 @@
>   
>   			vdd_usb: ldo4 {
>   				regulator-name = "vdd_usb";
> -				regulator-min-microvolt = <3300000>;
> -				regulator-max-microvolt = <3300000>;
>   				interrupts = <IT_CURLIM_LDO4 0>;
>   			};
>   
> @@ -208,7 +206,6 @@
>   			vref_ddr: vref_ddr {
>   				regulator-name = "vref_ddr";
>   				regulator-always-on;
> -				regulator-over-current-protection;
>   			};
>   
>   			bst_out: boost {
> @@ -219,13 +216,13 @@
>   			vbus_otg: pwr_sw1 {
>   				regulator-name = "vbus_otg";
>   				interrupts = <IT_OCP_OTG 0>;
> -				regulator-active-discharge;
> +				regulator-active-discharge = <1>;
>   			};
>   
>   			vbus_sw: pwr_sw2 {
>   				regulator-name = "vbus_sw";
>   				interrupts = <IT_OCP_SWOUT 0>;
> -				regulator-active-discharge;
> +				regulator-active-discharge = <1>;
>   			};
>   		};
>   
> diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
> index 6cf49a0a9e69..0c0b66788ea1 100644
> --- a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
> +++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
> @@ -173,8 +173,6 @@
>   
>   			vdd_usb: ldo4 {
>   				regulator-name = "vdd_usb";
> -				regulator-min-microvolt = <3300000>;
> -				regulator-max-microvolt = <3300000>;
>   				interrupts = <IT_CURLIM_LDO4 0>;
>   			};
>   
> @@ -197,7 +195,6 @@
>   			vref_ddr: vref_ddr {
>   				regulator-name = "vref_ddr";
>   				regulator-always-on;
> -				regulator-over-current-protection;
>   			};
>   
>   			 bst_out: boost {
> @@ -213,7 +210,7 @@
>   			 vbus_sw: pwr_sw2 {
>   				regulator-name = "vbus_sw";
>   				interrupts = <IT_OCP_SWOUT 0>;
> -				regulator-active-discharge;
> +				regulator-active-discharge = <1>;
>   			 };
>   		};
>   
> diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
> index 272a1a67a9ad..769fcf74685a 100644
> --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
> @@ -327,8 +327,6 @@
>   
>   			vdd_usb: ldo4 {
>   				regulator-name = "vdd_usb";
> -				regulator-min-microvolt = <3300000>;
> -				regulator-max-microvolt = <3300000>;
>   				interrupts = <IT_CURLIM_LDO4 0>;
>   			};
>   
> @@ -350,7 +348,6 @@
>   			vref_ddr: vref_ddr {
>   				regulator-name = "vref_ddr";
>   				regulator-always-on;
> -				regulator-over-current-protection;
>   			};
>   
>   			bst_out: boost {
> @@ -366,7 +363,7 @@
>   			vbus_sw: pwr_sw2 {
>   				regulator-name = "vbus_sw";
>   				interrupts = <IT_OCP_SWOUT 0>;
> -				regulator-active-discharge;
> +				regulator-active-discharge = <1>;
>   			};
>   		};
>   
> diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
> index 713485a95795..6706d8311a66 100644
> --- a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
> @@ -146,8 +146,6 @@
>   
>   			vdd_usb: ldo4 {
>   				regulator-name = "vdd_usb";
> -				regulator-min-microvolt = <3300000>;
> -				regulator-max-microvolt = <3300000>;
>   				interrupts = <IT_CURLIM_LDO4 0>;
>   			};
>   
> @@ -171,7 +169,6 @@
>   			vref_ddr: vref_ddr {
>   				regulator-name = "vref_ddr";
>   				regulator-always-on;
> -				regulator-over-current-protection;
>   			};
>   
>   			bst_out: boost {
> @@ -182,13 +179,13 @@
>   			vbus_otg: pwr_sw1 {
>   				regulator-name = "vbus_otg";
>   				interrupts = <IT_OCP_OTG 0>;
> -				regulator-active-discharge;
> +				regulator-active-discharge = <1>;
>   			};
>   
>   			vbus_sw: pwr_sw2 {
>   				regulator-name = "vbus_sw";
>   				interrupts = <IT_OCP_SWOUT 0>;
> -				regulator-active-discharge;
> +				regulator-active-discharge = <1>;
>   			};
>   		};
>