Hi On 6/3/21 5:34 PM, Grzegorz Szymaszek wrote:
The Seeed Odyssey-STM32MP157C board has a 20-pin DVP camera output. stm32mp15-pinctrl.dtsi contained one pin state definition for the DCMI interface, dcmi-0, AKA phandle dcmi_pins_a. This definition was incompatible with the pins used on the Odyssey board, where: - there are 8 data pins instead of 12, - DCMI_HSYNC is available at PA4 instead of PH8, - DCMI_D0 is at PC6 instead of PH9, - DCMI_D3 is at PE1 instead of PH12, - DCMI_D4 is at PE11 instead of PH14, - DCMI_D5 is at PD3 instead of PI4, - DCMI_D6 is at PE13 instead of PB8, - DCMI_D7 is at PB9 instead of PE6. Add the DCMI pins used on the Odyssey board as a new DCMI pin state definition, dcmi-1, AKA phandle dcmi_pins_b. Signed-off-by: Grzegorz Szymaszek <gszymaszek@xxxxxxxx> --- V1 -> V2: Removed the pinctrl override from the Odyssey device tree, added a new pinctrl in stm32mp15-pinctrl.dtsi instead arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 33 ++++++++++++++++++++++++ 1 file changed, 33 insertions(+)
Applied on stm32-next. I just updated the commit title by "ARM: dts: stm32: add a new DCMI pins group on stm32mp15" Thanks. Alex
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 060baa8b7e9d..5b60ecbd718f 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -118,6 +118,39 @@ pins { }; };+ dcmi_pins_b: dcmi-1 {+ pins { + pinmux = <STM32_PINMUX('A', 4, AF13)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('C', 6, AF13)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */ + <STM32_PINMUX('E', 1, AF13)>,/* DCMI_D3 */ + <STM32_PINMUX('E', 11, AF13)>,/* DCMI_D4 */ + <STM32_PINMUX('D', 3, AF13)>,/* DCMI_D5 */ + <STM32_PINMUX('E', 13, AF13)>,/* DCMI_D6 */ + <STM32_PINMUX('B', 9, AF13)>;/* DCMI_D7 */ + bias-disable; + }; + }; + + dcmi_sleep_pins_b: dcmi-sleep-1 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('C', 6, ANALOG)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */ + <STM32_PINMUX('E', 1, ANALOG)>,/* DCMI_D3 */ + <STM32_PINMUX('E', 11, ANALOG)>,/* DCMI_D4 */ + <STM32_PINMUX('D', 3, ANALOG)>,/* DCMI_D5 */ + <STM32_PINMUX('E', 13, ANALOG)>,/* DCMI_D6 */ + <STM32_PINMUX('B', 9, ANALOG)>;/* DCMI_D7 */ + }; + }; + ethernet0_rgmii_pins_a: rgmii-0 { pins1 { pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
