On Tue, Jun 08, 2021 at 06:35:06PM -0400, Jonathan Marek wrote: > Add bindings for qcom,sm8250-camss in order to support the camera > subsystem for SM8250. > > Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx> > --- > .../bindings/media/qcom,sm8250-camss.yaml | 399 ++++++++++++++++++ > 1 file changed, 399 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml > > diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml > new file mode 100644 > index 0000000000000..7180e52ee59a8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml > @@ -0,0 +1,399 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > + > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/media/qcom,sm8250-camss.yaml#"; > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; > + > +title: Qualcomm CAMSS ISP > + > +maintainers: > + - Robert Foss <robert.foss@xxxxxxxxxx> > + > +description: | > + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms > + > +properties: > + compatible: > + const: qcom,sm8250-camss > + > + clocks: > + minItems: 31 > + maxItems: 31 > + > + clock-names: > + items: > + - const: cam_hf_axi > + - const: camnoc_axi > + - const: csiphy0 > + - const: csiphy0_timer > + - const: csiphy1 > + - const: csiphy1_timer > + - const: csiphy2 > + - const: csiphy2_timer > + - const: csiphy3 > + - const: csiphy3_timer > + - const: csiphy4 > + - const: csiphy4_timer > + - const: csiphy5 > + - const: csiphy5_timer > + - const: vfe0_ahb > + - const: vfe0_axi > + - const: vfe0 > + - const: vfe0_cphy_rx > + - const: vfe0_csid > + - const: vfe0_areg > + - const: vfe1_ahb > + - const: vfe1_axi > + - const: vfe1 > + - const: vfe1_cphy_rx > + - const: vfe1_csid > + - const: vfe1_areg > + - const: vfe_lite_ahb > + - const: vfe_lite_axi > + - const: vfe_lite > + - const: vfe_lite_cphy_rx > + - const: vfe_lite_csid > + > + interrupts: > + minItems: 14 > + maxItems: 14 > + > + interrupt-names: > + items: > + - const: csid0 > + - const: csid1 > + - const: csid2 > + - const: csid3 > + - const: csiphy0 > + - const: csiphy1 > + - const: csiphy2 > + - const: csiphy3 > + - const: csiphy4 > + - const: csiphy5 > + - const: vfe0 > + - const: vfe1 > + - const: vfe_lite0 > + - const: vfe_lite1 > + > + iommus: > + maxItems: 1 > + > + power-domains: > + items: > + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller. > + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller. > + - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller. > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + description: > + CSI input ports. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: > + Input port for receiving CSI data. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + clock-lanes: > + maxItems: 1 > + > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + required: > + - clock-lanes > + - data-lanes > + > + port@1: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: > + Input port for receiving CSI data. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + clock-lanes: > + maxItems: 1 > + > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + required: > + - clock-lanes > + - data-lanes > + > + port@2: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: > + Input port for receiving CSI data. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + clock-lanes: > + maxItems: 1 > + > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + required: > + - clock-lanes > + - data-lanes > + > + port@3: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: > + Input port for receiving CSI data. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + clock-lanes: > + maxItems: 1 > + > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + required: > + - clock-lanes > + - data-lanes > + > + port@4: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: > + Input port for receiving CSI data. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + clock-lanes: > + maxItems: 1 > + > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + required: > + - clock-lanes > + - data-lanes > + > + port@5: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: > + Input port for receiving CSI data. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + clock-lanes: > + maxItems: 1 > + > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + required: > + - clock-lanes > + - data-lanes > + > + reg: > + minItems: 10 > + maxItems: 10 > + > + reg-names: Move these before ports. (DT) properties first then nodes. > + items: > + - const: csiphy0 > + - const: csiphy1 > + - const: csiphy2 > + - const: csiphy3 > + - const: csiphy4 > + - const: csiphy5 Should be separate phy nodes? Same/similar DPHY or CPHY as QCom DSI PHY? > + - const: vfe0 > + - const: vfe1 > + - const: vfe_lite0 > + - const: vfe_lite1 > + > +required: > + - clock-names > + - clocks > + - compatible > + - interrupt-names > + - interrupts > + - iommus > + - power-domains > + - reg > + - reg-names > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/clock/qcom,camcc-sm8250.h> > + #include <dt-bindings/clock/qcom,gcc-sm8250.h> > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + > + camss: camss@ac6a000 { > + compatible = "qcom,sm8250-camss"; > + > + reg = <0 0xac6a000 0 0x2000>, > + <0 0xac6c000 0 0x2000>, > + <0 0xac6e000 0 0x1000>, > + <0 0xac70000 0 0x1000>, > + <0 0xac72000 0 0x1000>, > + <0 0xac74000 0 0x1000>, > + <0 0xacb4000 0 0xd000>, > + <0 0xacc3000 0 0xd000>, > + <0 0xacd9000 0 0x2200>, > + <0 0xacdb200 0 0x2200>; > + reg-names = "csiphy0", > + "csiphy1", > + "csiphy2", > + "csiphy3", > + "csiphy4", > + "csiphy5", > + "vfe0", > + "vfe1", > + "vfe_lite0", > + "vfe_lite1"; > + > + interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "csiphy0", > + "csiphy1", > + "csiphy2", > + "csiphy3", > + "csiphy4", > + "csiphy5", > + "csid0", > + "csid1", > + "csid2", > + "csid3", > + "vfe0", > + "vfe1", > + "vfe_lite0", > + "vfe_lite1"; > + > + power-domains = <&camcc IFE_0_GDSC>, > + <&camcc IFE_1_GDSC>, > + <&camcc TITAN_TOP_GDSC>; > + > + clocks = <&gcc GCC_CAMERA_HF_AXI_CLK>, > + <&camcc CAM_CC_CSIPHY0_CLK>, > + <&camcc CAM_CC_CSI0PHYTIMER_CLK>, > + <&camcc CAM_CC_CSIPHY1_CLK>, > + <&camcc CAM_CC_CSI1PHYTIMER_CLK>, > + <&camcc CAM_CC_CSIPHY2_CLK>, > + <&camcc CAM_CC_CSI2PHYTIMER_CLK>, > + <&camcc CAM_CC_CSIPHY3_CLK>, > + <&camcc CAM_CC_CSI3PHYTIMER_CLK>, > + <&camcc CAM_CC_CSIPHY4_CLK>, > + <&camcc CAM_CC_CSI4PHYTIMER_CLK>, > + <&camcc CAM_CC_CSIPHY5_CLK>, > + <&camcc CAM_CC_CSI5PHYTIMER_CLK>, > + <&camcc CAM_CC_IFE_0_AHB_CLK>, > + <&camcc CAM_CC_IFE_0_AXI_CLK>, > + <&camcc CAM_CC_IFE_0_CLK>, > + <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>, > + <&camcc CAM_CC_IFE_0_CSID_CLK>, > + <&camcc CAM_CC_IFE_0_AREG_CLK>, > + <&camcc CAM_CC_IFE_1_AHB_CLK>, > + <&camcc CAM_CC_IFE_1_AXI_CLK>, > + <&camcc CAM_CC_IFE_1_CLK>, > + <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>, > + <&camcc CAM_CC_IFE_1_CSID_CLK>, > + <&camcc CAM_CC_IFE_1_AREG_CLK>, > + <&camcc CAM_CC_IFE_LITE_AHB_CLK>, > + <&camcc CAM_CC_IFE_LITE_AXI_CLK>, > + <&camcc CAM_CC_IFE_LITE_CLK>, > + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, > + <&camcc CAM_CC_IFE_LITE_CSID_CLK>; > + > + clock-names = "cam_hf_axi", > + "csiphy0", > + "csiphy0_timer", > + "csiphy1", > + "csiphy1_timer", > + "csiphy2", > + "csiphy2_timer", > + "csiphy3", > + "csiphy3_timer", > + "csiphy4", > + "csiphy4_timer", > + "csiphy5", > + "csiphy5_timer", > + "vfe0_ahb", > + "vfe0_axi", > + "vfe0", > + "vfe0_cphy_rx", > + "vfe0_csid", > + "vfe0_areg", > + "vfe1_ahb", > + "vfe1_axi", > + "vfe1", > + "vfe1_cphy_rx", > + "vfe1_csid", > + "vfe1_areg", > + "vfe_lite_ahb", > + "vfe_lite_axi", > + "vfe_lite", > + "vfe_lite_cphy_rx", > + "vfe_lite_csid"; > + > + iommus = <&apps_smmu 0x800 0x400>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + }; > + }; > -- > 2.26.1
