On 24/05/2021 14:20, Chun-Jie Chen wrote:
> Add MT8192 mmsys clock provider
>
> Signed-off-by: Weiyi Lu <weiyi.lu@xxxxxxxxxxxx>
> Signed-off-by: chun-jie.chen <chun-jie.chen@xxxxxxxxxxxx>
> ---
> drivers/clk/mediatek/Kconfig | 6 ++
> drivers/clk/mediatek/Makefile | 1 +
> drivers/clk/mediatek/clk-mt8192-mm.c | 108 +++++++++++++++++++++++++++
> 3 files changed, 115 insertions(+)
> create mode 100644 drivers/clk/mediatek/clk-mt8192-mm.c
>
[...]
> +
> +static int clk_mt8192_mm_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *node = dev->parent->of_node;
> + struct clk_onecell_data *clk_data;
> + int r;
> +
> + clk_data = mtk_alloc_clk_data(CLK_MM_NR_CLK);
> + if (!clk_data)
> + return -ENOMEM;
> +
> + r = mtk_clk_register_gates(node, mm_clks, ARRAY_SIZE(mm_clks), clk_data);
> + if (r)
> + return r;
> +
> + return of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
> +}
> +
> +static struct platform_driver clk_mt8192_mm_drv = {
> + .probe = clk_mt8192_mm_probe,
> + .driver = {
> + .name = "clk-mt8192-mm",
> + },
> +};
Did you had a look at drivers/soc/mediatek/mtk-mmsys.c? How is the MMSYS
different from all the other SoCs? I suppose it is not. Please don't just
implement the clock drivers, but check in existing code how they play together
with the HW they are for. MediaTek unfortunately has the design to add the clock
registers in the address space of the IP block that needs this registers. Which
makes it more complicated to implement clock driver in the first place.
Regards,
Matthias
