The patch ("dt-bindings: drm: Introduce the DP AUX bus") talks about
how using the DP AUX bus is better than learning how to slice
bread. Let's add it to the ti-sn65dsi86 bindings.
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
Changes in v9:
- Use an absolute path to refer to aux-bus schema.
Changes in v8:
- ti-sn65dsi86 references the new aux bus bindings.
Changes in v7:
- ti-sn65dsi86: Add aux-bus child patch new for v7.
.../bindings/display/bridge/ti,sn65dsi86.yaml | 20 ++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
index 26932d2e86ab..12b876a20574 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
@@ -70,6 +70,9 @@ properties:
const: 1
description: See ../../pwm/pwm.yaml for description of the cell formats.
+ aux-bus:
+ $ref: /schemas/display/dp-aux-bus.yaml#
+
ports:
$ref: /schemas/graph.yaml#/properties/ports
@@ -201,11 +204,26 @@ examples:
port@1 {
reg = <1>;
- endpoint {
+ sn65dsi86_out: endpoint {
remote-endpoint = <&panel_in_edp>;
};
};
};
+
+ aux-bus {
+ panel {
+ compatible = "boe,nv133fhm-n62";
+ power-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+ hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+
+ port {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&sn65dsi86_out>;
+ };
+ };
+ };
+ };
};
};
- |
--
2.32.0.rc1.229.g3e70b5a671-goog
