Re: [PATCH v3 13/17] crypto: qce: core: Make clocks optional

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Thara

On Fri, 21 May 2021 at 07:41, Thara Gopinath <thara.gopinath@xxxxxxxxxx> wrote:
>
> Hi Bhupesh,
>
> On 5/19/21 10:36 AM, Bhupesh Sharma wrote:
> > From: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
> >
> > On certain Snapdragon processors, the crypto engine clocks are enabled by
> > default by security firmware and the driver need not handle the
> > clocks. Make acquiring of all the clocks optional in crypto enginer driver
> > so that the driver intializes properly even if no clocks are specified in
> > the dt.
> >
> > Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> > Cc: Andy Gross <agross@xxxxxxxxxx>
> > Cc: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
> > Cc: David S. Miller <davem@xxxxxxxxxxxxx>
> > Cc: Stephen Boyd <sboyd@xxxxxxxxxx>
> > Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
> > Cc: Vinod Koul <vkoul@xxxxxxxxxx>
> > Cc: dmaengine@xxxxxxxxxxxxxxx
> > Cc: linux-clk@xxxxxxxxxxxxxxx
> > Cc: linux-crypto@xxxxxxxxxxxxxxx
> > Cc: devicetree@xxxxxxxxxxxxxxx
> > Cc: linux-kernel@xxxxxxxxxxxxxxx
> > Cc: bhupesh.linux@xxxxxxxxx
> > Signed-off-by: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
> > [ bhupesh.sharma@xxxxxxxxxx: Make clock enablement optional only for qcom parts where
> >    firmware has already initialized them, using a bool variable and fix
> >    error paths ]
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> > ---
> >   drivers/crypto/qce/core.c | 89 +++++++++++++++++++++++++--------------
> >   drivers/crypto/qce/core.h |  2 +
> >   2 files changed, 59 insertions(+), 32 deletions(-)
> >
> > diff --git a/drivers/crypto/qce/core.c b/drivers/crypto/qce/core.c
> > index 905378906ac7..8c3c68ba579e 100644
> > --- a/drivers/crypto/qce/core.c
> > +++ b/drivers/crypto/qce/core.c
> > @@ -9,6 +9,7 @@
> >   #include <linux/interrupt.h>
> >   #include <linux/module.h>
> >   #include <linux/mod_devicetable.h>
> > +#include <linux/of_device.h>
> >   #include <linux/platform_device.h>
> >   #include <linux/spinlock.h>
> >   #include <linux/types.h>
> > @@ -184,10 +185,20 @@ static int qce_check_version(struct qce_device *qce)
> >       return 0;
> >   }
> >
> > +static const struct of_device_id qce_crypto_of_match[] = {
> > +     { .compatible = "qcom,ipq6018-qce", },
> > +     { .compatible = "qcom,sdm845-qce", },
> > +     { .compatible = "qcom,sm8250-qce", },
>
> Adding qcom,sm8250-qce does not belong in this patch. It deserves a
> separate patch of it's own.

Ok, I will fix it in v4.

> > +     {}
> > +};
> > +MODULE_DEVICE_TABLE(of, qce_crypto_of_match);
> > +
> >   static int qce_crypto_probe(struct platform_device *pdev)
> >   {
> >       struct device *dev = &pdev->dev;
> >       struct qce_device *qce;
> > +     const struct of_device_id *of_id =
> > +                     of_match_device(qce_crypto_of_match, &pdev->dev);
> >       int ret;
> >
> >       qce = devm_kzalloc(dev, sizeof(*qce), GFP_KERNEL);
> > @@ -198,45 +209,65 @@ static int qce_crypto_probe(struct platform_device *pdev)
> >       platform_set_drvdata(pdev, qce);
> >
> >       qce->base = devm_platform_ioremap_resource(pdev, 0);
> > -     if (IS_ERR(qce->base))
> > -             return PTR_ERR(qce->base);
> > +     if (IS_ERR(qce->base)) {
> > +             ret = PTR_ERR(qce->base);
> > +             goto err_out;
> > +     }
>
> I don't see the reason for change in error handling here or below. But
> ,for whatever reason this is changed, it has to be a separate patch.

Ok, I will fix it in v4.

> >       ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
> >       if (ret < 0)
> > -             return ret;
> > +             goto err_out;
> >
> >       qce->mem_path = devm_of_icc_get(qce->dev, "memory");
> >       if (IS_ERR(qce->mem_path))
> >               return dev_err_probe(dev, PTR_ERR(qce->mem_path),
> >                                    "Failed to get mem path\n");
> >
> > -     qce->core = devm_clk_get(qce->dev, "core");
> > -     if (IS_ERR(qce->core))
> > -             return PTR_ERR(qce->core);
> > -
> > -     qce->iface = devm_clk_get(qce->dev, "iface");
> > -     if (IS_ERR(qce->iface))
> > -             return PTR_ERR(qce->iface);
> > -
> > -     qce->bus = devm_clk_get(qce->dev, "bus");
> > -     if (IS_ERR(qce->bus))
> > -             return PTR_ERR(qce->bus);
> > -
> >       ret = icc_set_bw(qce->mem_path, QCE_DEFAULT_MEM_BANDWIDTH, QCE_DEFAULT_MEM_BANDWIDTH);
> >       if (ret)
> > -             return ret;
> > +             goto err_out;
> >
> > -     ret = clk_prepare_enable(qce->core);
> > -     if (ret)
> > -             return ret;
> > +     /* On some qcom parts the crypto clocks are already configured by
> > +      * the firmware running before linux. In such cases we don't need to
> > +      * enable/configure them again. Check here for the same.
> > +      */
> > +     if (!strcmp(of_id->compatible, "qcom,ipq6018-qce") ||
> > +         !strcmp(of_id->compatible, "qcom,sdm845-qce"))
>
> You can avoid this and most of this patch by using
> devm_clk_get_optional. This patch can be like just three lines of code
> change. clk_prepare_enable returns 0 if the clock is null. There is no
> need to check for the compatibles above. Use devm_clk_get_optional
> instead of devm_clk_get and everything else can be left as is.

Ok, I will fix it in v4.

Thanks,
Bhupesh

> Warm Regards
> Thara
>
> > +             qce->clks_configured_by_fw = false;
> > +     else
> > +             qce->clks_configured_by_fw = true;
> > +
> > +     if (!qce->clks_configured_by_fw) {
> > +             qce->core = devm_clk_get(qce->dev, "core");
> > +             if (IS_ERR(qce->core)) {
> > +                     ret = PTR_ERR(qce->core);
> > +                     goto err_out;
> > +             }
> > +
> > +             qce->iface = devm_clk_get(qce->dev, "iface");
> > +             if (IS_ERR(qce->iface)) {
> > +                     ret = PTR_ERR(qce->iface);
> > +                     goto err_out;
> > +             }
> > +
> > +             qce->bus = devm_clk_get(qce->dev, "bus");
> > +             if (IS_ERR(qce->bus)) {
> > +                     ret = PTR_ERR(qce->bus);
> > +                     goto err_out;
> > +             }
> > +
> > +             ret = clk_prepare_enable(qce->core);
> > +             if (ret)
> > +                     goto err_out;
> >
> > -     ret = clk_prepare_enable(qce->iface);
> > -     if (ret)
> > -             goto err_clks_core;
> > +             ret = clk_prepare_enable(qce->iface);
> > +             if (ret)
> > +                     goto err_clks_core;
> >
> > -     ret = clk_prepare_enable(qce->bus);
> > -     if (ret)
> > -             goto err_clks_iface;
> > +             ret = clk_prepare_enable(qce->bus);
> > +             if (ret)
> > +                     goto err_clks_iface;
> > +     }
> >
> >       ret = qce_dma_request(qce->dev, &qce->dma);
> >       if (ret)
> > @@ -268,6 +299,7 @@ static int qce_crypto_probe(struct platform_device *pdev)
> >       clk_disable_unprepare(qce->iface);
> >   err_clks_core:
> >       clk_disable_unprepare(qce->core);
> > +err_out:
> >       return ret;
> >   }
> >
> > @@ -284,13 +316,6 @@ static int qce_crypto_remove(struct platform_device *pdev)
> >       return 0;
> >   }
> >
> > -static const struct of_device_id qce_crypto_of_match[] = {
> > -     { .compatible = "qcom,ipq6018-qce", },
> > -     { .compatible = "qcom,sdm845-qce", },
> > -     {}
> > -};
> > -MODULE_DEVICE_TABLE(of, qce_crypto_of_match);
> > -
> >   static struct platform_driver qce_crypto_driver = {
> >       .probe = qce_crypto_probe,
> >       .remove = qce_crypto_remove,
> > diff --git a/drivers/crypto/qce/core.h b/drivers/crypto/qce/core.h
> > index 228fcd69ec51..d9bf05babecc 100644
> > --- a/drivers/crypto/qce/core.h
> > +++ b/drivers/crypto/qce/core.h
> > @@ -23,6 +23,7 @@
> >    * @dma: pointer to dma data
> >    * @burst_size: the crypto burst size
> >    * @pipe_pair_id: which pipe pair id the device using
> > + * @clks_configured_by_fw: clocks are already configured by fw
> >    * @async_req_enqueue: invoked by every algorithm to enqueue a request
> >    * @async_req_done: invoked by every algorithm to finish its request
> >    */
> > @@ -39,6 +40,7 @@ struct qce_device {
> >       struct qce_dma_data dma;
> >       int burst_size;
> >       unsigned int pipe_pair_id;
> > +     bool clks_configured_by_fw;
> >       int (*async_req_enqueue)(struct qce_device *qce,
> >                                struct crypto_async_request *req);
> >       void (*async_req_done)(struct qce_device *qce, int ret);
> >
>
>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux