Re: [PATCH 2/4] MIPS: pci: Add driver for MT7621 PCIe controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Pali,

On Sat, Jun 5, 2021 at 12:58 AM Pali Rohár <pali@xxxxxxxxxx> wrote:
>
> On Friday 04 June 2021 13:49:39 Rob Herring wrote:
> > On Fri, Jun 04, 2021 at 06:55:25PM +0200, Pali Rohár wrote:
> > > On Wednesday 02 June 2021 14:43:53 Sergio Paracuellos wrote:
> > > > Hi Pali,
> > > >
> > > > On Wed, Jun 2, 2021 at 2:23 PM Pali Rohár <pali@xxxxxxxxxx> wrote:
> > > > >
> > > > > On Wednesday 02 June 2021 14:16:26 Sergio Paracuellos wrote:
> > > > > > Hi Pali,
> > > > > >
> > > > > > On Mon, May 31, 2021 at 4:19 PM Sergio Paracuellos
> > > > > > <sergio.paracuellos@xxxxxxxxx> wrote:
> > > > > > >
> > > > > > > On Mon, May 31, 2021 at 3:50 PM Pali Rohár <pali@xxxxxxxxxx> wrote:
> > > > > > > >
> > > > > > > > On Monday 31 May 2021 15:39:55 Sergio Paracuellos wrote:
> > > > > > > > > Hi Pali,
> > > > > > > > >
> > > > > > > > > Thanks for your comments.
> > > > > > > > >
> > > > > > > > > On Mon, May 31, 2021 at 3:14 PM Pali Rohár <pali@xxxxxxxxxx> wrote:
> > > > > > > > > >
> > > > > > > > > > On Saturday 15 May 2021 14:40:53 Sergio Paracuellos wrote:
> > > > > > > > > > > This patch adds a driver for the PCIe controller of MT7621 SoC.
> > > > > > > > > > >
> > > > > > > > > > > Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
> > > > > > > > > > > ---
> > > > > > > > > > >  arch/mips/pci/Makefile     |   1 +
> > > > > > > > > > >  arch/mips/pci/pci-mt7621.c | 624 +++++++++++++++++++++++++++++++++++++
> > > > > > > > > > >  arch/mips/ralink/Kconfig   |   9 +-
> > > > > > > > > > >  3 files changed, 633 insertions(+), 1 deletion(-)
> > > > > > > > > > >  create mode 100644 arch/mips/pci/pci-mt7621.c
> > > > > > > > > > >
> > > > > > > > > > > diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
> > > > > > > > > > > index f3eecc065e5c..178c550739c4 100644
> > > > > > > > > > > --- a/arch/mips/pci/Makefile
> > > > > > > > > > > +++ b/arch/mips/pci/Makefile
> > > > > > > > > > > @@ -24,6 +24,7 @@ obj-$(CONFIG_PCI_AR2315)    += pci-ar2315.o
> > > > > > > > > > >  obj-$(CONFIG_SOC_AR71XX)     += pci-ar71xx.o
> > > > > > > > > > >  obj-$(CONFIG_PCI_AR724X)     += pci-ar724x.o
> > > > > > > > > > >  obj-$(CONFIG_PCI_XTALK_BRIDGE)       += pci-xtalk-bridge.o
> > > > > > > > > > > +obj-$(CONFIG_PCI_MT7621)     += pci-mt7621.o
> > > > > > > > > > >  #
> > > > > > > > > > >  # These are still pretty much in the old state, watch, go blind.
> > > > > > > > > > >  #
> > > > > > > > > > > diff --git a/arch/mips/pci/pci-mt7621.c b/arch/mips/pci/pci-mt7621.c
> > > > > > > > > > > new file mode 100644
> > > > > > > > > > > index 000000000000..fe1945819d25
> > > > > > > > > > > --- /dev/null
> > > > > > > > > > > +++ b/arch/mips/pci/pci-mt7621.c
> > > > > > > > > > ...
> > > > > > > > > > > +static int mt7621_pcie_enable_ports(struct mt7621_pcie *pcie)
> > > > > > > > > > > +{
> > > > > > > > > > > +     struct device *dev = pcie->dev;
> > > > > > > > > > > +     struct mt7621_pcie_port *port;
> > > > > > > > > > > +     u8 num_slots_enabled = 0;
> > > > > > > > > > > +     u32 slot;
> > > > > > > > > > > +     u32 val;
> > > > > > > > > > > +     int err;
> > > > > > > > > > > +
> > > > > > > > > > > +     /* Setup MEMWIN and IOWIN */
> > > > > > > > > > > +     pcie_write(pcie, 0xffffffff, RALINK_PCI_MEMBASE);
> > > > > > > > > > > +     pcie_write(pcie, pcie->io.start, RALINK_PCI_IOBASE);
> > > > > > > > > > > +
> > > > > > > > > > > +     list_for_each_entry(port, &pcie->ports, list) {
> > > > > > > > > > > +             if (port->enabled) {
> > > > > > > > > > > +                     err = clk_prepare_enable(port->clk);
> > > > > > > > > > > +                     if (err) {
> > > > > > > > > > > +                             dev_err(dev, "enabling clk pcie%d\n", slot);
> > > > > > > > > > > +                             return err;
> > > > > > > > > > > +                     }
> > > > > > > > > > > +
> > > > > > > > > > > +                     mt7621_pcie_enable_port(port);
> > > > > > > > > > > +                     dev_info(dev, "PCIE%d enabled\n", port->slot);
> > > > > > > > > > > +                     num_slots_enabled++;
> > > > > > > > > > > +             }
> > > > > > > > > > > +     }
> > > > > > > > > > > +
> > > > > > > > > > > +     for (slot = 0; slot < num_slots_enabled; slot++) {
> > > > > > > > > > > +             val = read_config(pcie, slot, PCI_COMMAND);
> > > > > > > > > > > +             val |= PCI_COMMAND_MASTER;
> > > > > > > > > > > +             write_config(pcie, slot, PCI_COMMAND, val);
> > > > > > > > > >
> > > > > > > > > > Hello! Is this part of code correct? Because it looks strange if PCIe
> > > > > > > > > > controller driver automatically enables PCI bus mastering, prior device
> > > > > > > > > > driver initialize itself.
> > > > > > > > > >
> > > > > > > > > > Moreover kernel has already function pci_set_master() for this purpose
> > > > > > > > > > which is used by device drivers.
> > > > > > > > > >
> > > > > > > > > > So I think this code can confuse some device drivers...
> > > > > > > > >
> > > > > > > > > I agree that we have pci_set_master() to be used in pci device driver
> > > > > > > > > code. Original controller driver set this bit for enabled slots. Since
> > > > > > > > > there is no documentation at all for the PCI in this SoC
> > > > > > > >
> > > > > > > > I see... this is really a big problem to do any driver development...
> > > > > > >
> > > > > > > For sure it is :(.
> > > > > > >
> > > > > > > >
> > > > > > > > > I have
> > > > > > > > > maintained the setting in the driver in a cleaner way. See original
> > > > > > > > > driver code and the setting here [0]. There is no other reason than
> > > > > > > > > that. I am ok with removing this from here and testing with my two
> > > > > > > > > devices that everything is still ok if having this setting in the pci
> > > > > > > > > controller driver is a real problem.
> > > > > > > >
> > > > > > > > You can run lspci -nnvv with and without PCI_COMMAND_MASTER code and
> > > > > > > > then compare outputs.
> > > > > > > >
> > > > > > > > Device drivers for sure enable PCI_COMMAND_MASTER at the time when it is
> > > > > > > > needed, so it is possible that there would be no difference in lspci
> > > > > > > > output.
> > > > > > >
> > > > > > > Thanks. I will take this into account when v2 is submitted after more
> > > > > > > review comments come :).
> > > > > >
> > > > > > I have tested to remove this and check lspci -nnvv output with and
> > > > > > without PCI_COMMAND_MASTER code and, as you pointed out, there is no
> > > > > > difference between them. Also, both boards are working without
> > > > > > regressions at all. So I will remove this code for next version.
> > > > >
> > > > > Perfect!
> > > > >
> > > > > > Thanks,
> > > > > >     Sergio Paracuellos
> > > > > > >
> > > > > > > >
> > > > > > > > > [0]: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git/tree/drivers/staging/mt7621-pci/pci-mt7621.c?h=v4.18#n676
> > > > > > > > >
> > > > > > > > > Best regards,
> > > > > > > > >     Sergio Paracuellos
> > > > > > > > > >
> > > > > > > > > > > +             /* configure RC FTS number to 250 when it leaves L0s */
> > > > > > > > > > > +             val = read_config(pcie, slot, PCIE_FTS_NUM);
> > > > > > > > > > > +             val &= ~PCIE_FTS_NUM_MASK;
> > > > > > > > > > > +             val |= PCIE_FTS_NUM_L0(0x50);
> > > > > > > > > > > +             write_config(pcie, slot, PCIE_FTS_NUM, val);
> > > > >
> > > > > Could you look also what is doing this code (PCIE_FTS_NUM)? It is marked
> > > > > as MT specific register. But from this code for me it looks like that it
> > > > > just access config space of some device and therefore it could be some
> > > > > standard PCIe register. Just with hardcoded calculated offset.
> > >
> > > So based on your lspci output, there is no PCIe capability register at
> > > address PCIE_FTS_NUM (0x70c), right? It seems strange to trying access
> > > capability register outside of capability list.
> >
> > Looks like a DW PCIe port logic register:
> >
> > drivers/pci/controller/dwc/pcie-designware.h-/* Synopsys-specific PCIe configuration registers */
> > drivers/pci/controller/dwc/pcie-designware.h:#define PCIE_PORT_AFR                      0x70C
> > drivers/pci/controller/dwc/pcie-designware.h-#define PORT_AFR_N_FTS_MASK                GENMASK(15, 8)
> > drivers/pci/controller/dwc/pcie-designware.h-#define PORT_AFR_N_FTS(n)          FIELD_PREP(PORT_AFR_N_FTS_MASK, n)
> > drivers/pci/controller/dwc/pcie-designware.h-#define PORT_AFR_CC_N_FTS_MASK             GENMASK(23, 16)
> > drivers/pci/controller/dwc/pcie-designware.h-#define PORT_AFR_CC_N_FTS(n)               FIELD_PREP(PORT_AFR_CC_N_FTS_MASK, n)
> > drivers/pci/controller/dwc/pcie-designware.h-#define PORT_AFR_ENTER_ASPM                BIT(30)
> > drivers/pci/controller/dwc/pcie-designware.h-#define PORT_AFR_L0S_ENTRANCE_LAT_SHIFT    24
> > drivers/pci/controller/dwc/pcie-designware.h-#define PORT_AFR_L0S_ENTRANCE_LAT_MASK     GENMASK(26, 24)
> > drivers/pci/controller/dwc/pcie-designware.h-#define PORT_AFR_L1_ENTRANCE_LAT_SHIFT     27
> > drivers/pci/controller/dwc/pcie-designware.h-#define PORT_AFR_L1_ENTRANCE_LAT_MASK      GENMASK(29, 27)
> >
> > Rob
>
> Rob: nice catch!
> Does it mean that this MT7621 SoC has dwc controller and driver can be
> theoretically in future rewritten to use common dwc code?
>
> Sergio: I have tried to find some information about it and seems that
> MT7620, MT7621 and MT7628 SoC are really using some designware dwc IP.
> Some details are available in section "Embedded/kernel developer
> friendliness" in following blog post:
> https://www.abclinuxu.cz/blog/GardenOfEdenConfiguration/2019/10/opus-magnum

Thanks. For what see in the datasheet linked there some of the
registers looks pretty similar. It also defines registers taking in
account three root ports but in mt7628 and mt7620 there is only one
available. It seems tons of things are not listed there but it is
better than nothing.

>
> And seems that "programming guide" documentation for MT7620 is available
> on internet with description of PCIe registers. I do not know how MT7620
> and MT7621 are different but maybe it could help to develop or understand
> driver.

Yes, it is available but none of the dwc stuff is inside. Only the
main register as the mt7628 datasheet has.

Best regards,
    Sergio Paracuellos




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux