RE: Unsupported phy-connection-type sgmii-2500 in arch/powerpc/boot/dts/fsl/t1023rdb.dts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Andrew Lunn <andrew@xxxxxxx>
> Sent: 04 June 2021 23:24
> To: Madalin Bucur <madalin.bucur@xxxxxxx>
> Cc: Russell King <linux@xxxxxxxxxxxxxxx>; Pali Rohár <pali@xxxxxxxxxx>;
> Igal Liberman <Igal.Liberman@xxxxxxxxxxxxx>; Shruti Kanetkar
> <Shruti@xxxxxxxxxxxxx>; Emil Medve <Emilian.Medve@xxxxxxxxxxxxx>; Scott
> Wood <oss@xxxxxxxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>; Michael
> Ellerman <mpe@xxxxxxxxxxxxxx>; Benjamin Herrenschmidt
> <benh@xxxxxxxxxxxxxxxxxxx>; netdev@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Camelia
> Alexandra Groza (OSS) <camelia.groza@xxxxxxxxxxx>
> Subject: Re: Unsupported phy-connection-type sgmii-2500 in
> arch/powerpc/boot/dts/fsl/t1023rdb.dts
> 
> > The "sgmii-2500" compatible in that device tree describes an SGMII HW
> > block, overclocked at 2.5G. Without that overclocking, it's a plain
> > Cisco (like) SGMII HW block. That's the reason you need to disable it's
> > AN setting when overclocked. With the proper Reset Configuration Word,
> > you could remove the overclocking and transform that into a plain
> "sgmii".
> > Thus, the dts compatible describes the HW, as it is.
> 
> It sounds like the hardware is capable of swapping between SGMII and
> 2500BaseX.
> 
> What we have in DT in this case is not describing the hardware, but
> how we configure the hardware. It is one of the few places we abuse DT
> for configuration.
> 
>     Andrew

The actual selection of this mode of operation is performed by the so called
Reset Configuration Word from the boot media, that aligned with the HW and
board design. The need to name it something other than plain "sgmii" comes
from the HW special need for AN to be disabled to operate.

Actually, the weird/non-standard hardware is described by the device tree
with a value that puts it in a class of its own. Instead of the overclocked
SGMII denomination "sgmii-2500" it could have been named just as well
"overclocked-nonstandard-2.5G-ethernet-no-autoneg-SGMII-hw-ip".

One could try to change device trees to slip configuration details, but the
backwards compatibility aspect renders this futile. Is there any option to
say "sgmii" then "autoneg disabled"?

Madalin




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux