Re: [PATCH v2 7/7] power: supply: max17040: Do not enforce (incorrect) interrupt trigger type

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Wed, Jun 02, 2021 at 03:06:09PM -0500, Rob Herring wrote:
> On Wed, 26 May 2021 13:20:36 -0400, Krzysztof Kozlowski wrote:
> > From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> > 
> > Interrupt line can be configured on different hardware in different way,
> > even inverted.  Therefore driver should not enforce specific trigger
> > type - edge falling - but instead rely on Devicetree to configure it.
> > 
> > The Maxim 14577/77836 datasheets describe the interrupt line as active
> > low with a requirement of acknowledge from the CPU therefore the edge
> > falling is not correct.
> > 
> > Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> > Acked-by: Iskren Chernev <iskren.chernev@xxxxxxxxx>
> > 
> > ---
> > 
> > Changes since v1:
> > 1. Remove the 'flags' variable.
> > 2. Added ack.
> > 3. Rebase - the bindings were converted to dtschema.
> > ---
> >  .../devicetree/bindings/power/supply/maxim,max17040.yaml      | 2 +-
> >  drivers/power/supply/max17040_battery.c                       | 4 +---
> >  2 files changed, 2 insertions(+), 4 deletions(-)
> > 
> 
> Acked-by: Rob Herring <robh@xxxxxxxxxx>

Thanks, queued.

-- Sebastian

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux