Hi,
On Sun, May 30, 2021 at 8:57 AM Rajeev Nandan <rajeevny@xxxxxxxxxxxxxx> wrote:
>
> +static int dp_aux_backlight_update_status(struct backlight_device *bd)
> +{
> + struct dp_aux_backlight *bl = bl_get_data(bd);
> + u16 brightness = backlight_get_brightness(bd);
> + int ret = 0;
> +
> + if (brightness > 0) {
> + if (!bl->enabled) {
> + drm_edp_backlight_enable(bl->aux, &bl->info, brightness);
> + bl->enabled = true;
> + return 0;
> + }
> + ret = drm_edp_backlight_set_level(bl->aux, &bl->info, brightness);
> + } else {
> + if (bl->enabled) {
> + drm_edp_backlight_disable(bl->aux, &bl->info);
> + bl->enabled = false;
> + }
> + }
I was trying to figure out if there are any races / locking problems /
problems trying to tweak the backlight when the panel is off. I don't
_think_ there are. Specifically:
1. Before turning the panel off, drm_panel will call
backlight_disable(). That will set BL_CORE_FBBLANK which is not set by
any other calls. Then it will call your
dp_aux_backlight_update_status().
2. Once BL_CORE_FBBLANK is set then backlight_get_brightness() will
always return 0.
This means that a transition from 0 -> non-zero (and enable) will
always only happen when the panel is on, which is good. It also means
that we'll always transition to 0 (disable the backlight) when the
panel turns off.
In terms of other races, it looks like the AUX transfer code handles
grabbing a mutex around transfers so we should be safe there.
So I guess the above is just a long-winded way of saying that this
looks right to me. :-)
BTW: we should probably make sure that the full set of people
identified by `./scripts/get_maintainer.pl -f
./drivers/video/backlight` are CCed on your series. I see Daniel
already and I've added the rest.
> +/**
> + * drm_panel_dp_aux_backlight - create and use DP AUX backlight
> + * @panel: DRM panel
> + * @aux: The DP AUX channel to use
> + *
> + * Use this function to create and handle backlight if your panel
> + * supports backlight control over DP AUX channel using DPCD
> + * registers as per VESA's standard backlight control interface.
> + *
> + * When the panel is enabled backlight will be enabled after a
> + * successful call to &drm_panel_funcs.enable()
> + *
> + * When the panel is disabled backlight will be disabled before the
> + * call to &drm_panel_funcs.disable().
> + *
> + * A typical implementation for a panel driver supporting backlight
> + * control over DP AUX will call this function at probe time.
> + * Backlight will then be handled transparently without requiring
> + * any intervention from the driver.
> + *
> + * drm_panel_dp_aux_backlight() must be called after the call to drm_panel_init().
> + *
> + * Return: 0 on success or a negative error code on failure.
> + */
> +int drm_panel_dp_aux_backlight(struct drm_panel *panel, struct drm_dp_aux *aux)
> +{
> + struct dp_aux_backlight *bl;
> + struct backlight_properties props = { 0 };
> + u16 current_level;
> + u8 current_mode;
> + u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE];
> + int ret;
> +
> + if (!panel || !panel->dev || !aux)
> + return -EINVAL;
> +
> + bl = devm_kzalloc(panel->dev, sizeof(*bl), GFP_KERNEL);
> + if (!bl)
> + return -ENOMEM;
> +
> + bl->aux = aux;
> +
> + ret = drm_dp_dpcd_read(aux, DP_EDP_DPCD_REV, edp_dpcd,
> + EDP_DISPLAY_CTL_CAP_SIZE);
> + if (ret < 0)
> + return ret;
> +
> + if (!drm_edp_backlight_supported(edp_dpcd)) {
> + DRM_DEV_INFO(panel->dev, "DP AUX backlight is not supported\n");
> + return 0;
> + }
nit: move this part up above the memory allocation. There's no reason
to allocate memory for "bl" if the backlight isn't supported.
> @@ -64,8 +65,8 @@ enum drm_panel_orientation;
> * the panel. This is the job of the .unprepare() function.
> *
> * Backlight can be handled automatically if configured using
> - * drm_panel_of_backlight(). Then the driver does not need to implement the
> - * functionality to enable/disable backlight.
> + * drm_panel_of_backlight() or drm_panel_dp_aux_backlight(). Then the driver
> + * does not need to implement the functionality to enable/disable backlight.
> */
> struct drm_panel_funcs {
> /**
> @@ -144,8 +145,8 @@ struct drm_panel {
> * Backlight device, used to turn on backlight after the call
> * to enable(), and to turn off backlight before the call to
> * disable().
> - * backlight is set by drm_panel_of_backlight() and drivers
> - * shall not assign it.
> + * backlight is set by drm_panel_of_backlight()/drm_panel_dp_aux_backlight()
> + * and drivers shall not assign it.
Slight nit that I would have wrapped the drm_panel_dp_aux_backlight()
to the next line just to avoid one really long line followed by a
short one.
Other than the two nits (ordering of memory allocation and word
wrapping in a comment), this looks good to me. Feel free to add my
Reviewed-by tag when you fix the nits.
NOTE: Even though I have commit access to drm-misc now, I wouldn't
feel comfortable merging this to drm-misc myself without review
feedback from someone more senior. Obviously we're still blocked on my
and Lyude's series landing first, but even assuming those just land
as-is we'll need some more adult supervision before this can land. ;-)
That being said, I personally think this looks pretty nice now.
-Doug
> */
> struct backlight_device *backlight;
>
> @@ -208,11 +209,17 @@ static inline int of_drm_get_panel_orientation(const struct device_node *np,
> #if IS_ENABLED(CONFIG_DRM_PANEL) && (IS_BUILTIN(CONFIG_BACKLIGHT_CLASS_DEVICE) || \
> (IS_MODULE(CONFIG_DRM) && IS_MODULE(CONFIG_BACKLIGHT_CLASS_DEVICE)))
> int drm_panel_of_backlight(struct drm_panel *panel);
> +int drm_panel_dp_aux_backlight(struct drm_panel *panel, struct drm_dp_aux *aux);
> #else
> static inline int drm_panel_of_backlight(struct drm_panel *panel)
> {
> return 0;
> }
> +static inline int drm_panel_dp_aux_backlight(struct drm_panel *panel,
> + struct drm_dp_aux *aux)
> +{
> + return 0;
> +}
> #endif
>
> #endif
> --
> 2.7.4
>
