On 21. 6. 3. 오전 12:30, Chanwoo Choi wrote:
On 21. 6. 3. 오전 12:20, Stephan Gerhold wrote:
On Thu, Jun 03, 2021 at 12:13:18AM +0900, Chanwoo Choi wrote:
On 21. 6. 2. 오전 5:00, Stephan Gerhold wrote:
Prepare for supporting SM5504 in the extcon-sm5502 driver by replacing
enum sm5504_types with a struct sm5504_type that stores the
chip-specific
definitions. This struct can then be defined separately for SM5504
without having to add if (type == TYPE_SM5504) everywhere in the code.
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
Changes in v3: New patch to simplify diff on next patch
---
drivers/extcon/extcon-sm5502.c | 64
+++++++++++++++++++++-------------
drivers/extcon/extcon-sm5502.h | 4 ---
2 files changed, 40 insertions(+), 28 deletions(-)
diff --git a/drivers/extcon/extcon-sm5502.c
b/drivers/extcon/extcon-sm5502.c
index 9f40bb9f1f81..951f6ca4c479 100644
--- a/drivers/extcon/extcon-sm5502.c
+++ b/drivers/extcon/extcon-sm5502.c
@@ -40,17 +40,13 @@ struct sm5502_muic_info {
struct i2c_client *i2c;
struct regmap *regmap;
+ const struct sm5502_type *type;
struct regmap_irq_chip_data *irq_data;
- struct muic_irq *muic_irqs;
- unsigned int num_muic_irqs;
int irq;
bool irq_attach;
bool irq_detach;
struct work_struct irq_work;
- struct reg_data *reg_data;
- unsigned int num_reg_data;
-
struct mutex mutex;
/*
@@ -62,6 +58,17 @@ struct sm5502_muic_info {
struct delayed_work wq_detcable;
};
+struct sm5502_type {
+ struct muic_irq *muic_irqs;
+ unsigned int num_muic_irqs;
+ const struct regmap_irq_chip *irq_chip;
+
+ struct reg_data *reg_data;
+ unsigned int num_reg_data;
+
+ int (*parse_irq)(struct sm5502_muic_info *info, int irq_type);
+};
+
/* Default value of SM5502 register to bring up MUIC device. */
static struct reg_data sm5502_reg_data[] = {
{
@@ -502,11 +509,11 @@ static irqreturn_t sm5502_muic_irq_handler(int
irq, void *data)
struct sm5502_muic_info *info = data;
int i, irq_type = -1, ret;
- for (i = 0; i < info->num_muic_irqs; i++)
- if (irq == info->muic_irqs[i].virq)
- irq_type = info->muic_irqs[i].irq;
+ for (i = 0; i < info->type->num_muic_irqs; i++)
+ if (irq == info->type->muic_irqs[i].virq)
+ irq_type = info->type->muic_irqs[i].irq;
- ret = sm5502_parse_irq(info, irq_type);
+ ret = info->type->parse_irq(info, irq_type);
Looks good to me. But there is only one comment.
Need to check the 'parse_irq' as following:
If you agree this suggestion, I'll apply with following changes by
myself:
if (!info->type->parse_irq) {
dev_err(info->dev, "failed to handle irq due to parse_irq\n",
return IRQ_NONE;
}
This condition should be impossible, since .parse_irq is set for both
SM5502 and SM5504:
static const struct sm5502_type sm5502_data = {
/* ... */
.parse_irq = sm5502_parse_irq,
};
static const struct sm5502_type sm5504_data = {
/* ... */
.parse_irq = sm5504_parse_irq,
};
Which failure case are you trying to handle with that if statement?
There is not failure case of this patchset. But, this refactoring
suggestion has the potential problem without checking whether mandatory
function pointer is NULL or not. When adding new chip by using this
driver, the author might have the human error without parse_irq
initialization even if the mandatory.
Instead, it is better to check whether parser_irq is NULL or not
on probe function in order to reduce the unnecessary repetitive checking.
Thanks!
Stephan
--
Best Regards,
Samsung Electronics
Chanwoo Choi
