Re: [PATCH v2 2/5] dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Martin,

On Fri, May 28, 2021 at 10:13:33AM +0200, Martin Kepplinger wrote:
> Document the bindings used for the SK Hynix Hi-846 CMOS camera driver.
> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx>

Could you read Documentation/driver-api/media/camera-sensor.rst, please?

I believe you'll need assigned-clock-rates device property as well as
link-frequencies endpoint property.

> ---
>  .../bindings/media/i2c/hynix,hi846.yaml       | 99 +++++++++++++++++++
>  1 file changed, 99 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> new file mode 100644
> index 000000000000..2991108e23e5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> @@ -0,0 +1,99 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor
> +
> +maintainers:
> +  - Martin Kepplinger <martin.kepplinger@xxxxxxx>
> +
> +description: |-
> +  The Hi-846 is a raw image sensor with an MIPI CSI-2 image data
> +  interface and CCI (I2C compatible) control bus. The output format
> +  is 10bit Bayer.

Virtually all Bayer sensors can do 8 bpp, too. I'd drop the sentence
mentoning 10 bits.

> +
> +properties:
> +  compatible:
> +    const: hynix,hi846
> +
> +  reg:
> +    description: I2C device address.
> +    maxItems: 1
> +
> +  clocks:
> +    description: Reference to the mclk clock.
> +    maxItems: 1
> +
> +  clock-names:
> +    const: mclk
> +
> +  rst-gpios:
> +    description: Reference to the GPIO connected to the reset pin. Active low.
> +    maxItems: 1
> +
> +  vdd-supply:
> +    description: Definition of the regulator used as 1.8V digital power supply.
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/properties/port
> +    additionalProperties: false
> +
> +    properties:
> +      endpoint:
> +        $ref: /schemas/media/video-interfaces.yaml#
> +        unevaluatedProperties: false
> +
> +        properties:
> +          data-lanes:
> +            oneOf:
> +              - items:
> +                  - const: 1
> +                  - const: 2
> +                  - const: 3
> +                  - const: 4
> +              - items:
> +                  - const: 1
> +                  - const: 2
> +
> +        required:
> +          - data-lanes
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - rst-gpios
> +  - vdd-supply
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        hi846: camera@20 {
> +            compatible = "hynix,hi846";
> +            reg = <0x20>;
> +            clocks = <&clk>;
> +            clock-names = "mclk";
> +            vdd-supply = <&reg_camera_pwr_en>; /* 1.8v */
> +            rst-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
> +
> +            port {
> +                camera_out: endpoint {
> +                    remote-endpoint = <&csi1_ep1>;
> +                    data-lanes = <1 2>;
> +                };
> +            };
> +        };
> +    };
> +
> +...

-- 
Kind regards,

Sakari Ailus



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux