Re: [PATCH 9/9] media: dwc: dw-hdmi-rx: Add support for CEC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/06/2021 13:24, Nelson Costa wrote:
> This adds support for the optional HDMI CEC feature
> for the Synopsys DesignWare HDMI RX Controller.
> 
> It uses the generic CEC framework interface.
> 
> Signed-off-by: Jose Abreu <jose.abreu@xxxxxxxxxxxx>
> Signed-off-by: Nelson Costa <nelson.costa@xxxxxxxxxxxx>
> ---
>  drivers/media/platform/dwc/Kconfig      |  10 ++
>  drivers/media/platform/dwc/dw-hdmi-rx.c | 259 +++++++++++++++++++++++++++++++-
>  drivers/media/platform/dwc/dw-hdmi-rx.h |  57 +++++++
>  3 files changed, 324 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/media/platform/dwc/Kconfig b/drivers/media/platform/dwc/Kconfig
> index e915ca6..b487a92 100644
> --- a/drivers/media/platform/dwc/Kconfig
> +++ b/drivers/media/platform/dwc/Kconfig
> @@ -11,3 +11,13 @@ config VIDEO_DWC_HDMI_RX
>  
>  	  To compile this driver as a module, choose M here. The module
>  	  will be called dw-hdmi-rx.
> +
> +config VIDEO_DWC_HDMI_RX_CEC
> +	bool "Synopsys DesignWare HDMI Receiver CEC support"
> +	depends on VIDEO_DWC_HDMI_RX
> +	select CEC_CORE
> +	help
> +	  When selected the Synopsys DesignWare HDMI RX controller
> +	  will support the optional HDMI CEC feature.
> +
> +	  It uses the generic CEC framework interface.
> diff --git a/drivers/media/platform/dwc/dw-hdmi-rx.c b/drivers/media/platform/dwc/dw-hdmi-rx.c
> index a468a93..5d6b1c0 100644
> --- a/drivers/media/platform/dwc/dw-hdmi-rx.c
> +++ b/drivers/media/platform/dwc/dw-hdmi-rx.c
> @@ -21,6 +21,7 @@
>  #include <linux/workqueue.h>
>  #include <linux/rational.h>
>  #include <linux/hdmi.h>
> +#include <media/cec.h>
>  #include <media/v4l2-async.h>
>  #include <media/v4l2-ctrls.h>
>  #include <media/v4l2-device.h>
> @@ -36,6 +37,7 @@
>  #define DW_HDMI_JTAG_TAP_WRITE_CMD	1
>  #define DW_HDMI_JTAG_TAP_READ_CMD	3
>  #define DW_HDMI_AUDIO_FREQ_RANGE	1000
> +#define DW_HDMI_CEC_MAX_LOG_ADDRS	CEC_MAX_LOG_ADDRS
>  
>  /* EDID for HDMI RX */
>  static u32 dw_hdmi_edid[] = {
> @@ -164,6 +166,9 @@ struct dw_hdmi_dev {
>  	union hdmi_infoframe audioif;
>  	union hdmi_infoframe vsif;
>  
> +	/* CEC */
> +	struct cec_adapter *cec_adap;
> +
>  	/* v4l2 device */
>  	struct v4l2_subdev sd;
>  	struct v4l2_ctrl_handler hdl;
> @@ -365,6 +370,20 @@ static void dw_hdmi_reset(struct dw_hdmi_dev *dw_dev)
>  	dw_hdmi_main_reset(dw_dev);
>  
>  	dw_hdmi_disable_hpd(dw_dev);
> +
> +	/* After a main reset try to re-enable the cec adapter in order to
> +	 * reconfigure the required cec registers. For this the physical address
> +	 * is invalidated and reconfigured, and with CEC_CAP_NEEDS_HPD allowing
> +	 * to re-enable the adapter.
> +	 */
> +	if (dw_dev->cec_adap) {
> +		u16 phys_addr = dw_dev->cec_adap->phys_addr;
> +
> +		cec_phys_addr_invalidate(dw_dev->cec_adap);
> +		cec_s_phys_addr(dw_dev->cec_adap, phys_addr, false);
> +		dev_dbg(dw_dev->dev, "%s: re-enable cec adapter\n",
> +			__func__);
> +	}
>  }
>  
>  static inline bool is_off(struct dw_hdmi_dev *dw_dev)
> @@ -1460,6 +1479,184 @@ static u32 dw_hdmi_get_int_val(struct dw_hdmi_dev *dw_dev, u32 ists, u32 ien)
>  	return hdmi_readl(dw_dev, ists) & hdmi_readl(dw_dev, ien);
>  }
>  
> +#if IS_ENABLED(CONFIG_VIDEO_DWC_HDMI_RX_CEC)
> +static void dw_hdmi_cec_enable_ints(struct dw_hdmi_dev *dw_dev)
> +{
> +	u32 mask = DW_HDMI_DONE_ISTS | DW_HDMI_EOM_ISTS |
> +		DW_HDMI_NACK_ISTS | DW_HDMI_ARBLST_ISTS |
> +		DW_HDMI_ERROR_INIT_ISTS | DW_HDMI_ERROR_FOLL_ISTS;
> +
> +	hdmi_writel(dw_dev, mask, DW_HDMI_AUD_CEC_IEN_SET);
> +	hdmi_writel(dw_dev, 0x0, DW_HDMI_CEC_MASK);
> +}
> +
> +static void dw_hdmi_cec_disable_ints(struct dw_hdmi_dev *dw_dev)
> +{
> +	hdmi_writel(dw_dev, ~0x0, DW_HDMI_AUD_CEC_IEN_CLR);
> +	hdmi_writel(dw_dev, ~0x0, DW_HDMI_CEC_MASK);
> +}
> +
> +static void dw_hdmi_cec_clear_ints(struct dw_hdmi_dev *dw_dev)
> +{
> +	hdmi_writel(dw_dev, ~0x0, DW_HDMI_AUD_CEC_ICLR);
> +}
> +
> +static void dw_hdmi_cec_tx_raw_status(struct dw_hdmi_dev *dw_dev, u32 stat)
> +{
> +	if (hdmi_readl(dw_dev, DW_HDMI_CEC_CTRL) & DW_HDMI_SEND_MASK) {
> +		dev_dbg(dw_dev->dev, "%s: tx is busy\n", __func__);
> +		return;
> +	}
> +
> +	if (stat & DW_HDMI_ARBLST_ISTS) {
> +		cec_transmit_attempt_done(dw_dev->cec_adap,
> +					  CEC_TX_STATUS_ARB_LOST);
> +		return;
> +	}
> +
> +	if (stat & DW_HDMI_NACK_ISTS) {
> +		cec_transmit_attempt_done(dw_dev->cec_adap, CEC_TX_STATUS_NACK);
> +		return;
> +	}
> +
> +	if (stat & DW_HDMI_ERROR_INIT_ISTS) {
> +		dev_dbg(dw_dev->dev, "%s: got low drive error\n", __func__);
> +		cec_transmit_attempt_done(dw_dev->cec_adap,
> +					  CEC_TX_STATUS_LOW_DRIVE);
> +		return;
> +	}
> +
> +	if (stat & DW_HDMI_DONE_ISTS) {
> +		cec_transmit_attempt_done(dw_dev->cec_adap, CEC_TX_STATUS_OK);
> +		return;
> +	}
> +}
> +
> +static void dw_hdmi_cec_received_msg(struct dw_hdmi_dev *dw_dev)
> +{
> +	struct cec_msg msg;
> +	u8 i;
> +
> +	msg.len = hdmi_readl(dw_dev, DW_HDMI_CEC_RX_CNT);
> +	if (!msg.len || msg.len > DW_HDMI_CEC_RX_DATA_MAX)
> +		return; /* it's an invalid/non-existent message */
> +
> +	for (i = 0; i < msg.len; i++)
> +		msg.msg[i] = hdmi_readl(dw_dev, DW_HDMI_CEC_RX_DATA(i));
> +
> +	hdmi_writel(dw_dev, 0x0, DW_HDMI_CEC_LOCK);
> +	cec_received_msg(dw_dev->cec_adap, &msg);
> +}
> +
> +static int dw_hdmi_cec_adap_enable(struct cec_adapter *adap, bool enable)
> +{
> +	struct dw_hdmi_dev *dw_dev = cec_get_drvdata(adap);
> +
> +	dev_dbg(dw_dev->dev, "%s: enable=%d\n", __func__, enable);
> +
> +	hdmi_writel(dw_dev, 0x0, DW_HDMI_CEC_ADDR_L);
> +	hdmi_writel(dw_dev, 0x0, DW_HDMI_CEC_ADDR_H);
> +
> +	if (enable) {
> +		hdmi_writel(dw_dev, 0x0, DW_HDMI_CEC_LOCK);
> +		dw_hdmi_cec_clear_ints(dw_dev);
> +		dw_hdmi_cec_enable_ints(dw_dev);
> +	} else {
> +		dw_hdmi_cec_disable_ints(dw_dev);
> +		dw_hdmi_cec_clear_ints(dw_dev);
> +	}
> +
> +	return 0;
> +}
> +
> +static int dw_hdmi_cec_adap_log_addr(struct cec_adapter *adap, u8 addr)
> +{
> +	struct dw_hdmi_dev *dw_dev = cec_get_drvdata(adap);
> +	u32 tmp;
> +
> +	dev_dbg(dw_dev->dev, "%s: addr=%d\n", __func__, addr);
> +
> +	if (addr == CEC_LOG_ADDR_INVALID) {
> +		hdmi_writel(dw_dev, 0x0, DW_HDMI_CEC_ADDR_L);
> +		hdmi_writel(dw_dev, 0x0, DW_HDMI_CEC_ADDR_H);
> +		return 0;
> +	}
> +
> +	if (addr >= 8) {
> +		tmp = hdmi_readl(dw_dev, DW_HDMI_CEC_ADDR_H);
> +		tmp |= BIT(addr - 8);
> +		hdmi_writel(dw_dev, tmp, DW_HDMI_CEC_ADDR_H);
> +	} else {
> +		tmp = hdmi_readl(dw_dev, DW_HDMI_CEC_ADDR_L);
> +		tmp |= BIT(addr);
> +		hdmi_writel(dw_dev, tmp, DW_HDMI_CEC_ADDR_L);
> +	}
> +
> +	return 0;
> +}
> +
> +static int dw_hdmi_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
> +				     u32 signal_free_time, struct cec_msg *msg)
> +{
> +	struct dw_hdmi_dev *dw_dev = cec_get_drvdata(adap);
> +	u8 len = msg->len;
> +	u32 reg;
> +	u8 i;
> +
> +	dev_dbg(dw_dev->dev, "%s: len=%d\n", __func__, len);
> +
> +	if (hdmi_readl(dw_dev, DW_HDMI_CEC_CTRL) & DW_HDMI_SEND_MASK) {
> +		dev_err(dw_dev->dev, "%s: tx is busy\n", __func__);
> +		return -EBUSY;
> +	}
> +
> +	for (i = 0; i < len; i++)
> +		hdmi_writel(dw_dev, msg->msg[i], DW_HDMI_CEC_TX_DATA(i));
> +
> +	switch (signal_free_time) {
> +	case CEC_SIGNAL_FREE_TIME_RETRY:
> +		reg = 0x0;
> +		break;
> +	case CEC_SIGNAL_FREE_TIME_NEXT_XFER:
> +		reg = 0x2;
> +		break;
> +	case CEC_SIGNAL_FREE_TIME_NEW_INITIATOR:
> +	default:
> +		reg = 0x1;
> +		break;
> +	}
> +
> +	hdmi_writel(dw_dev, len, DW_HDMI_CEC_TX_CNT);
> +	hdmi_mask_writel(dw_dev, reg, DW_HDMI_CEC_CTRL,
> +			 DW_HDMI_FRAME_TYP_OFFSET,
> +			 DW_HDMI_FRAME_TYP_MASK);
> +	hdmi_mask_writel(dw_dev, 0x1, DW_HDMI_CEC_CTRL,
> +			 DW_HDMI_SEND_OFFSET,
> +			 DW_HDMI_SEND_MASK);
> +	return 0;
> +}
> +
> +static const struct cec_adap_ops dw_hdmi_cec_adap_ops = {
> +	.adap_enable = dw_hdmi_cec_adap_enable,
> +	.adap_log_addr = dw_hdmi_cec_adap_log_addr,
> +	.adap_transmit = dw_hdmi_cec_adap_transmit,
> +};
> +
> +static void dw_hdmi_cec_irq_handler(struct dw_hdmi_dev *dw_dev)
> +{
> +	u32 cec_ists = dw_hdmi_get_int_val(dw_dev, DW_HDMI_AUD_CEC_ISTS,
> +			DW_HDMI_AUD_CEC_IEN);
> +
> +	dw_hdmi_cec_clear_ints(dw_dev);
> +
> +	if (cec_ists) {
> +		dw_hdmi_cec_tx_raw_status(dw_dev, cec_ists);
> +		if (cec_ists & DW_HDMI_EOM_ISTS)
> +			dw_hdmi_cec_received_msg(dw_dev);
> +	}
> +}
> +#endif /* CONFIG_VIDEO_DWC_HDMI_RX_CEC */
> +
>  static u8 dw_hdmi_get_curr_vic(struct dw_hdmi_dev *dw_dev, bool *is_hdmi_vic)
>  {
>  	u8 vic = hdmi_mask_readl(dw_dev, DW_HDMI_PDEC_AVI_PB,
> @@ -2058,6 +2255,10 @@ static irqreturn_t dw_hdmi_irq_handler(int irq, void *dev_data)
>  		}
>  	}
>  
> +#if IS_ENABLED(CONFIG_VIDEO_DWC_HDMI_RX_CEC)
> +	dw_hdmi_cec_irq_handler(dw_dev);
> +#endif /* CONFIG_VIDEO_DWC_HDMI_RX_CEC */
> +
>  	return IRQ_HANDLED;
>  }
>  
> @@ -2556,14 +2757,27 @@ static int dw_hdmi_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
>  	struct dw_hdmi_dev *dw_dev = to_dw_dev(sd);
>  	int input_count = dw_dev->config->phy->input_count;
>  	int size, ret;
> +	u16 phys_addr;
>  	u32 *tmp;
>  
>  	memset(edid->reserved, 0, sizeof(edid->reserved));
>  
> -	if (edid->pad >= input_count || !edid->edid || !edid->blocks)
> +	if (edid->pad >= input_count || !edid->edid)
>  		return -EINVAL;
>  	if (edid->start_block != 0)
>  		return -EINVAL;
> +	if (!edid->blocks) {
> +		phys_addr = CEC_PHYS_ADDR_INVALID;
> +		goto set_phys_addr;
> +	}
> +
> +	/* get the source physical address (PA) from edid */
> +	phys_addr = cec_get_edid_phys_addr(edid->edid, edid->blocks * 128,
> +					   NULL);
> +	/* get the own physical address getting the parent of Source PA */
> +	ret = v4l2_phys_addr_validate(phys_addr, &phys_addr, NULL);
> +	if (ret)
> +		return ret;

Something I should have asked in my review for 6/9: if there are
multiple inputs, does each input have its own EDID area?

If there are multiple inputs, are the CEC lines of each input part
of the same CEC bus? This is typically the case for e.g. TVs, and as
far as I can see it's the case for this receiver driver as well.

>  
>  	/* Clear old EDID */
>  	size = dw_dev->curr_edid_blocks[edid->pad] * 128;
> @@ -2592,7 +2806,9 @@ static int dw_hdmi_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
>  	if (ret)
>  		return ret;
>  
> +set_phys_addr:
>  	dw_dev->curr_edid_blocks[edid->pad] = edid->blocks;
> +	cec_s_phys_addr(dw_dev->cec_adap, phys_addr, false);
>  	return 0;
>  }
>  
> @@ -2825,15 +3041,33 @@ static int dw_hdmi_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
>  static int dw_hdmi_registered(struct v4l2_subdev *sd)
>  {
>  	struct dw_hdmi_dev *dw_dev = to_dw_dev(sd);
> +	int ret;
> +
> +	ret = cec_register_adapter(dw_dev->cec_adap, dw_dev->dev);
> +	if (ret) {
> +		dev_err(dw_dev->dev, "failed to register CEC adapter\n");
> +		goto err_adapter;
> +	}
> +	cec_s_phys_addr(dw_dev->cec_adap, 0, false);

This isn't right. When you set the EDID you will also set the physical
address, you don't do that when registering the CEC adapter, there is no
physical address yet.

> +	if (dw_dev->cec_adap)
> +		dev_info(dw_dev->dev,
> +			 "CEC adapter %s registered for HDMI input\n",
> +			 dev_name(&dw_dev->cec_adap->devnode.dev));
>  
>  	dw_dev->registered = true;
>  	return 0;
> +
> +err_adapter:
> +	cec_delete_adapter(dw_dev->cec_adap);
> +	return ret;
>  }
>  
>  static void dw_hdmi_unregistered(struct v4l2_subdev *sd)
>  {
>  	struct dw_hdmi_dev *dw_dev = to_dw_dev(sd);
>  
> +	cec_unregister_adapter(dw_dev->cec_adap);
> +
>  	dw_dev->registered = false;
>  }
>  
> @@ -3194,10 +3428,29 @@ static int dw_hdmi_rx_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto err_phy_exit;
>  
> +	/* CEC */
> +#if IS_ENABLED(CONFIG_VIDEO_DWC_HDMI_RX_CEC)
> +	dw_dev->cec_adap = cec_allocate_adapter(&dw_hdmi_cec_adap_ops,
> +						dw_dev, dev_name(dev),
> +						(CEC_CAP_DEFAULTS |
> +						 CEC_CAP_NEEDS_HPD |

This cap makes no sense for a receiver.

> +						 CEC_CAP_CONNECTOR_INFO),

This cap also should be removed: connector info is not (yet) supported
for receivers, only for transmitters.

Regards,

	Hans

> +						DW_HDMI_CEC_MAX_LOG_ADDRS);
> +	ret = PTR_ERR_OR_ZERO(dw_dev->cec_adap);
> +	if (ret) {
> +		dev_err(dev, "failed to allocate CEC adapter\n");
> +		goto err_cec;
> +	}
> +
> +	dev_info(dev, "CEC is enabled\n");
> +#else
> +	dev_info(dev, "CEC is disabled\n");
> +#endif /* CONFIG_VIDEO_DWC_HDMI_RX_CEC */
> +
>  	ret = v4l2_async_register_subdev(sd);
>  	if (ret) {
>  		dev_err(dev, "failed to register subdev\n");
> -		goto err_phy_exit;
> +		goto err_cec;
>  	}
>  
>  	/* Fill initial format settings */
> @@ -3230,6 +3483,8 @@ static int dw_hdmi_rx_probe(struct platform_device *pdev)
>  
>  err_subdev:
>  	v4l2_async_unregister_subdev(sd);
> +err_cec:
> +	cec_delete_adapter(dw_dev->cec_adap);
>  err_phy_exit:
>  	dw_hdmi_phy_exit(dw_dev);
>  err_hdl:
> diff --git a/drivers/media/platform/dwc/dw-hdmi-rx.h b/drivers/media/platform/dwc/dw-hdmi-rx.h
> index f0ea1d4..775b7a9 100644
> --- a/drivers/media/platform/dwc/dw-hdmi-rx.h
> +++ b/drivers/media/platform/dwc/dw-hdmi-rx.h
> @@ -325,6 +325,25 @@
>  
>  #define DW_HDMI_HDCP22_STATUS			0x08fc
>  
> +/* id_audio_and_cec_interrupt Registers */
> +#define DW_HDMI_AUD_CEC_IEN_CLR			0x0f90
> +#define DW_HDMI_AUD_CEC_IEN_SET			0x0f94
> +
> +#define DW_HDMI_AUD_CEC_ISTS			0x0f98
> +#define DW_HDMI_WAKEUPCTRL_ISTS			BIT(22)
> +#define DW_HDMI_ERROR_FOLL_ISTS			BIT(21)
> +#define DW_HDMI_ERROR_INIT_ISTS			BIT(20)
> +#define DW_HDMI_ARBLST_ISTS			BIT(19)
> +#define DW_HDMI_NACK_ISTS			BIT(18)
> +#define DW_HDMI_EOM_ISTS			BIT(17)
> +#define DW_HDMI_DONE_ISTS			BIT(16)
> +#define DW_HDMI_SCK_STABLE_ISTS			BIT(1)
> +#define DW_HDMI_CTSN_CNT_ISTS			BIT(0)
> +
> +#define DW_HDMI_AUD_CEC_IEN			0x0f9c
> +#define DW_HDMI_AUD_CEC_ICLR			0x0fa0
> +#define DW_HDMI_AUD_CEC_ISET			0x0fa4
> +
>  /* id_mode_detection_interrupt Registers */
>  #define DW_HDMI_MD_IEN_CLR			0x0fc0
>  #define DW_HDMI_MD_IEN_SET			0x0fc4
> @@ -426,6 +445,44 @@
>  #define DW_HDMI_HDMI_ENABLE_MASK		BIT(2)
>  #define DW_HDMI_HDMI_ENABLE_OFFSET		2
>  
> +/* id_cec Registers */
> +#define DW_HDMI_CEC_CTRL			0x1f00
> +#define DW_HDMI_STANDBY_MASK			BIT(4)
> +#define DW_HDMI_STANDBY_OFFSET			4
> +#define DW_HDMI_BC_NACK_MASK			BIT(3)
> +#define DW_HDMI_BC_NACK_OFFSET			3
> +#define DW_HDMI_FRAME_TYP_MASK			GENMASK(2, 1)
> +#define DW_HDMI_FRAME_TYP_OFFSET		1
> +#define DW_HDMI_SEND_MASK			BIT(0)
> +#define DW_HDMI_SEND_OFFSET			0
> +
> +#define DW_HDMI_CEC_MASK			0x1f08
> +#define DW_HDMI_WAKEUP_MASK			BIT(6)
> +#define DW_HDMI_WAKEUP_OFFSET			6
> +#define DW_HDMI_ERROR_FLOW_MASK			BIT(5)
> +#define DW_HDMI_ERROR_FLOW_OFFSET		5
> +#define DW_HDMI_ERROR_INITITATOR_MASK		BIT(4)
> +#define DW_HDMI_ERROR_INITITATOR_OFFSET		4
> +#define DW_HDMI_ARB_LOST_MASK			BIT(3)
> +#define DW_HDMI_ARB_LOST_OFFSET			3
> +#define DW_HDMI_NACK_MASK			BIT(2)
> +#define DW_HDMI_NACK_OFFSET			2
> +#define DW_HDMI_EOM_MASK			BIT(1)
> +#define DW_HDMI_EOM_OFFSET			1
> +#define DW_HDMI_DONE_MASK			BIT(0)
> +#define DW_HDMI_DONE_OFFSET			0
> +
> +#define DW_HDMI_CEC_ADDR_L			0x1f14
> +#define DW_HDMI_CEC_ADDR_H			0x1f18
> +#define DW_HDMI_CEC_TX_CNT			0x1f1c
> +#define DW_HDMI_CEC_RX_CNT			0x1f20
> +#define DW_HDMI_CEC_TX_DATA(i)			(0x1f40 + ((i) * 4))
> +#define DW_HDMI_CEC_TX_DATA_MAX			16
> +#define DW_HDMI_CEC_RX_DATA(i)			(0x1f80 + ((i) * 4))
> +#define DW_HDMI_CEC_RX_DATA_MAX			16
> +#define DW_HDMI_CEC_LOCK			0x1fc0
> +#define DW_HDMI_CEC_WAKEUPCTRL			0x1fc4
> +
>  /* id_cbus Registers */
>  #define DW_HDMI_CBUSIOCTRL			0x3020
>  #define DW_HDMI_DATAPATH_CBUSZ_MASK		BIT(24)
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux